Personal protective equipment (PPE) refers to clothing and gear that protects the body from injury. Examples of PPE include goggles to protect eyes from dust, safety shoes with steel toes to protect feet from falling objects, aprons to protect clothing, face masks to prevent inhalation of chemicals, and gloves for hand protection. When performing tasks, appropriate PPE conforming to safety regulations and policies must always be worn.
Personal Protective Equipment (PPE) is any safety equipment workers wear to prevent injury in the workplace when engineering and administrative controls fail to eliminate the hazard.
Personal Protective Equipment (PPE) is any safety equipment workers wear to prevent injury in the workplace when engineering and administrative controls fail to eliminate the hazard.
basics_of_ppe_training.ppt ppe componentsNitika588942
specialized clothing or equipment worn by an employee for protection against infectious materials” Types of PPE Used in Healthcare Settings
Gloves – protect hands
Gowns/aprons – protect skin and/or clothing
Masks and respirators– protect mouth/nose
Respirators – protect respiratory tract from airborne infectious agents.
Types of PPE Used in Healthcare Settings-Goggles – protect eyes
Face shields – protect face, mouth, nose, and eyes
Key Points About PPE-Don before contact with the patient, generally before entering the room
Use carefully – don’t spread contamination
Remove and discard carefully, either at the doorway or immediately outside patient room; remove respirator outside room
Immediately perform hand hygiene How to Safely Use PPE-Keep gloved hands away from face
Avoid touching or adjusting other PPE
Remove gloves if they become torn; perform hand hygiene before donning new gloves
Limit surfaces and items touched. Contaminated” and “Clean” Areas of PPE-Contaminated – outside front
Areas of PPE that have or are likely to have been in contact with body sites, materials, or environmental surfaces where the infectious organism may reside
Clean – inside, outside back, ties on head and back
Areas of PPE that are not likely to have been in contact with the infectious organism
Sequence for Removing PPE-Gloves
Face shield or goggles
Gown
Mask or respirator
Where to Remove PPE-At doorway, before leaving patient room or in anteroom*
Remove respirator outside room, after door has been closed*
Standard Precautions-Previously called Universal Precautions
Assumes blood and body fluid of ANY patient could be infectious
Recommends PPE and other infection control practices to prevent transmission in any healthcare setting
Decisions about PPE use determined by type of clinical interaction with patient
Standard Precautions for PPE-Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretionsMask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use
Authority, A. E. (2017, November 2). YouTube. Retrieved from https ://www.youtube.com/watch?v=WseklKhGGAM&feature=youtu.be
Edvard. (2020, August 10). Electrical Engineering Portal. Retrieved from https ://electrical-engineering-portal.com/protection-three-phase-motors-from-unbalance-phase-loss-rotation
Electrical, P. (2019, August 3). YouTube. Retrieved from https ://www.youtube.com/watch?v=toUXbbPy7IU&feature=youtu.be
Electricveda. (2020). Electricveda.com. Retrieved from http s://www.electricveda.com/building-services/method-of-clean-earthing-or-grounding-in-electrical-system
Engineering, L. (2017, January 31). YouTube. Retrieved from http s://www.youtube.com/watch?v=km8MSWm39Z0&feature=youtu.be
Generator, I. (2015, October 12). YouTube. Retrieved from http s://www.youtube.com/watch?v=kyGWAVqnBFY&feature=youtu.be
Goyal, S. (2013, May 30). YouTube. Retrieved from http s://www.youtube.com/watch?v=2Pb3y69LUYw&feature=youtu.be
Hall, D. T. (2019). Practical Marine Electrical Knowledge. SSS Marine Society.
Insights, M. (2020). Ship's Electro-Technology part 1. Marine Insights.
Keljik, J. (2008). Electricity 2; Devices, Circuits, and Materials 8th Edition. New York: Delmar Cengage Learning.
Keljik, J. (2008). Electricity 4; AC/DC Motors, Control, and Maintenance 8th Edition. New York: Delmar Cengage Learning.
Keljik, J. (2013). Electricity 3: Power generation and Delivery 10th Edition. New York: Delmar Cengage Learning.
Kitcher, C. (2015, December 14). YouTube. Retrieved from http s://www.youtube.com/watch?v=FUjZwMMoltQ&feature=youtu.be
LabVolt. (2004). AC/DC MOTORS AND GENERATORS. Quebec: LabVolt Services.
LabVolt. (2004). Electric Power / Control; AC/DC Motor and Generator. Quebec: LabVolt Services.
LabVolt. (2004). ELECTRIC POWER / CONTROLS; COMPUTER-BASED INSTRUMENTS FOR EMS. Quebec: LabVolt Services.
Lessons, E. (2010, May 23). YouTube. Retrieved from https ://www.youtube.com/watch?v=ZL8zrkahuL0&feature=youtu.be
MyMisterSparky. (2010, January 21). YouTube. Retrieved from https ://www.youtube.com/watch?v=Vkd43t2y2to&feature=youtu.be
Wik, R. (2016, May 9). YouTube. Retrieved from http s://www.youtube.com/watch?v=jGdCqSxtTfo&feature=youtu.be
Woodworth, J. (2016, August 8). YouTube. Retrieved from http s://www.youtube.com/watch?v=yFCWzQxT3nE&feature=youtu.be
Yaskawa. (2017, August 21). YouTube. Retrieved from http s://www.youtube.com/watch?v=3-cs4eEiBWo&feature=youtu.be
Yaskawa. (2019, May 14). YouTube. Retrieved from http s://www.youtube.com/watch?v=qpKybaLURy0&feature=youtu.be
Yaskawa. (2019, May 20). YouTube. Retrieved from http s://www.youtube.com/watch?v=_ZztDN5XX5o&feature=youtu.be
The observation of safety guidelines are essential to the well being of any worker and the productivity of the said workers. this presentation will offer a clear guideline for those within the building industry.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
basics_of_ppe_training.ppt ppe componentsNitika588942
specialized clothing or equipment worn by an employee for protection against infectious materials” Types of PPE Used in Healthcare Settings
Gloves – protect hands
Gowns/aprons – protect skin and/or clothing
Masks and respirators– protect mouth/nose
Respirators – protect respiratory tract from airborne infectious agents.
Types of PPE Used in Healthcare Settings-Goggles – protect eyes
Face shields – protect face, mouth, nose, and eyes
Key Points About PPE-Don before contact with the patient, generally before entering the room
Use carefully – don’t spread contamination
Remove and discard carefully, either at the doorway or immediately outside patient room; remove respirator outside room
Immediately perform hand hygiene How to Safely Use PPE-Keep gloved hands away from face
Avoid touching or adjusting other PPE
Remove gloves if they become torn; perform hand hygiene before donning new gloves
Limit surfaces and items touched. Contaminated” and “Clean” Areas of PPE-Contaminated – outside front
Areas of PPE that have or are likely to have been in contact with body sites, materials, or environmental surfaces where the infectious organism may reside
Clean – inside, outside back, ties on head and back
Areas of PPE that are not likely to have been in contact with the infectious organism
Sequence for Removing PPE-Gloves
Face shield or goggles
Gown
Mask or respirator
Where to Remove PPE-At doorway, before leaving patient room or in anteroom*
Remove respirator outside room, after door has been closed*
Standard Precautions-Previously called Universal Precautions
Assumes blood and body fluid of ANY patient could be infectious
Recommends PPE and other infection control practices to prevent transmission in any healthcare setting
Decisions about PPE use determined by type of clinical interaction with patient
Standard Precautions for PPE-Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretionsMask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions
Mask and goggles or a face shield – Use
Authority, A. E. (2017, November 2). YouTube. Retrieved from https ://www.youtube.com/watch?v=WseklKhGGAM&feature=youtu.be
Edvard. (2020, August 10). Electrical Engineering Portal. Retrieved from https ://electrical-engineering-portal.com/protection-three-phase-motors-from-unbalance-phase-loss-rotation
Electrical, P. (2019, August 3). YouTube. Retrieved from https ://www.youtube.com/watch?v=toUXbbPy7IU&feature=youtu.be
Electricveda. (2020). Electricveda.com. Retrieved from http s://www.electricveda.com/building-services/method-of-clean-earthing-or-grounding-in-electrical-system
Engineering, L. (2017, January 31). YouTube. Retrieved from http s://www.youtube.com/watch?v=km8MSWm39Z0&feature=youtu.be
Generator, I. (2015, October 12). YouTube. Retrieved from http s://www.youtube.com/watch?v=kyGWAVqnBFY&feature=youtu.be
Goyal, S. (2013, May 30). YouTube. Retrieved from http s://www.youtube.com/watch?v=2Pb3y69LUYw&feature=youtu.be
Hall, D. T. (2019). Practical Marine Electrical Knowledge. SSS Marine Society.
Insights, M. (2020). Ship's Electro-Technology part 1. Marine Insights.
Keljik, J. (2008). Electricity 2; Devices, Circuits, and Materials 8th Edition. New York: Delmar Cengage Learning.
Keljik, J. (2008). Electricity 4; AC/DC Motors, Control, and Maintenance 8th Edition. New York: Delmar Cengage Learning.
Keljik, J. (2013). Electricity 3: Power generation and Delivery 10th Edition. New York: Delmar Cengage Learning.
Kitcher, C. (2015, December 14). YouTube. Retrieved from http s://www.youtube.com/watch?v=FUjZwMMoltQ&feature=youtu.be
LabVolt. (2004). AC/DC MOTORS AND GENERATORS. Quebec: LabVolt Services.
LabVolt. (2004). Electric Power / Control; AC/DC Motor and Generator. Quebec: LabVolt Services.
LabVolt. (2004). ELECTRIC POWER / CONTROLS; COMPUTER-BASED INSTRUMENTS FOR EMS. Quebec: LabVolt Services.
Lessons, E. (2010, May 23). YouTube. Retrieved from https ://www.youtube.com/watch?v=ZL8zrkahuL0&feature=youtu.be
MyMisterSparky. (2010, January 21). YouTube. Retrieved from https ://www.youtube.com/watch?v=Vkd43t2y2to&feature=youtu.be
Wik, R. (2016, May 9). YouTube. Retrieved from http s://www.youtube.com/watch?v=jGdCqSxtTfo&feature=youtu.be
Woodworth, J. (2016, August 8). YouTube. Retrieved from http s://www.youtube.com/watch?v=yFCWzQxT3nE&feature=youtu.be
Yaskawa. (2017, August 21). YouTube. Retrieved from http s://www.youtube.com/watch?v=3-cs4eEiBWo&feature=youtu.be
Yaskawa. (2019, May 14). YouTube. Retrieved from http s://www.youtube.com/watch?v=qpKybaLURy0&feature=youtu.be
Yaskawa. (2019, May 20). YouTube. Retrieved from http s://www.youtube.com/watch?v=_ZztDN5XX5o&feature=youtu.be
The observation of safety guidelines are essential to the well being of any worker and the productivity of the said workers. this presentation will offer a clear guideline for those within the building industry.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
PPE.pptx
1. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
It refers to protective clothing, helmets,
goggles, or other gear designed to protect
the wearer's body or clothing from injury
by electrical hazards, heat, chemicals, and
infection, for job-related occupational
safety and health purposes.
2. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Goggles
A large spectacles, with shields around
the rims, for protecting the eyes from
dust, excessive light, wind, etc.
3. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Safety shoes
A steel-toe boot (also known as a safety
boot, steel-capped boot or safety shoe) is
a durable boot or shoe that has a
protective reinforcement in the toe which
protects the foot from falling objects or
compression, usually combined with a
mid sole plate to protect against
punctures from below.
4. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Apron
It is a functional protection that layers
over ones outfit to protect ones clothes
and skin from incidental stains and marks.
5. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Face Mask
A covering for the face to prevent the
inhaling or absorbing dust and other
chemicals.
6. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Gloves
The covering material with a separate
sheath for each finger used for hand
protection.
7. USING HAND TOOLS
PERSONAL SAFETY
Whenever you perform a task in the
workshop you must use personal
protective clothing and equipment (PPE)
that is appropriate for the task and
which conforms to your local safety
regulations and policies
8. USING HAND TOOLS
SAFETY CHECK
• Do not use flammable cleaners or
water on electrical equipment.
• Make sure designated walkways are
kept clear of any obstructions.
• Always wear protective clothing and
the appropriate safety equipment.
• Make sure that you understand and
observe all legislative and personal
safety procedures when carrying out
the following tasks.
9. USING HAND TOOLS
SAFETY REQUIREMENTS
For your protection, observe the following
safety requirements:
• Follow all cautions, warnings, and instructions
marked on the equipment.
• Ensure that the voltage and frequency rating
of the power outlet matches the electrical rating
labels on the system.
•Use properly grounded power outlets
10. USING HAND TOOLS
PROPER STORAGE OF TOOLS, PARTS, AND EQUIPMENT
To ensure that tools and equipment remain in
good condition and last for a long time, store them
properly. Properly stored tools and equipment will
be easy to find when needed and are less likely to
be lost.
• Parts should be properly stored and labeled
• Tools should be properly placed on the board,
and labeled.
• Use bins for storing small part.
11. USING HAND TOOLS
PROPER STORAGE OF TOOLS, PARTS, AND EQUIPMENT
Benefits:
• Tools and parts are kept in good condition and
are easy to find
• Productivity is increased because time is not
wasted looking for tools, parts and equipment.
• Workshop staff develop a sense of
responsibility and pride in their work.