We are ready for offering Technical Presentation Sub Best Practice of Electrical Equipment Instalation and Safety of Products Earthiing and Protection in our Noida India Office of Through Video Wall On Line or through Team View ID Time Require 1.Hrs with advance request Initmation .

1. From : India JMV LPS LTD Noida (U.P.) Date : 25.07.2017
International Solar PV Power Presentation by JMV LPS LTD Place JMV Office in Noida Dt.25th
July2017
Thanks note to the all International guest visted our office to attend Solar PV and other renewable
Green method Presentaton for Generating Power Roof Top, Ground Mounted, Canal Top ,Water
Floating along with Hybrid Combination like Wind Power Generator Machine and High Energy Storage
Batteries.
Your self introduction for related to present Power Generation ,Transmission and distribution along with
presence of Solar PV Power Plant in your country ,this information is realy benefit to India and mile
stone how to work in your country to support More & More Solar Pv Power for Larger Power Production
Mega Watt up to your Home requirement in Watt/Kilo Watt Level.
You can utilize Solar Power base Products in your cities and Urban Solar Power LED Street Light ,Trafiic
Light ,out door CCTV Camera and many other Equipments.
The Solar PV Plant can be Install near to your Facility connecting to distribution line from if your Power
supply agencies or you can develop Stand along Off Grid with Battery Back for use when dark in Night.
The power generation through Solar PV is Economical for installation waste land can be utilige and your
are countributing carbon free environment to the world for that plz accept in advance big great Salute
for supporting our earth towards Green and Carbon Free Environment.
India belive Harmony with all Nabours and also support earth for peace and green life.
India also very much fast growing country who can surve Latest better in Design which meets
International all Electrical Standard with Economical in Cost as Compare to other Forward Countries.
India have team of Young Talent who can decide Fast and take dynamic decision to support india and
Their international Industries requirements.
Power Generation ,Transmisson ,Distribution Facilties for Indian and International Requirements.
Transportation for Passenger and Goods Bus,Train and Vechile which Complies International
Requirements.
Telecommunication Network Facilties for Indian and International Requirements.
Building and other Infrastructure for Cities Facilties for Indian and International Requirements.
JMV LPS LTD is Indian Company belive Make in India and Innovation of Products Fall under Earthing
and Protection to best Practice of Electrical Equipment instalation and Safety of Products along with
Human Being Products as below:
Maintenance Free Earthing(Copper Bonded ROD, Earthing Enhance Compound , Earth Pits) Follow UL
,IEC,IEEE

2. Exothermic Joints ( Permanent Welding with 100% Surface Contact Suitable all Bi-Metals) UL ,IEC,IEEE
Theft Free/Theft Protected Long Run in Drum Roll Copper Clad Steel/ Copper Clad Aluminum with or
Without Insultation. Follow IEC,IEEE
Surge Protection for Power and Communication Ports Follow IEC,IEEE
External Lightning Protection as per IEC 62305 and Early Stream Emision Type as per NFC17-
102/UNE21-186.
Cable Jointing Kit for all LT Cable (Quick Lock and Quick Open Reusable) condition up IP68 and Flame
Proof.
We would like Further extend our support to develop our relation with your Govt Project Official and
PVT Partners Handling above Segment along with our Special Support to Supply of Equipment Disaster
Management Early Warning ,Earth Quake,Flood Warning,Sea High Tide, and Lighting to keep your
people safe.
Thanking you again for Visiting our Office in India
With Regards Family JMV LPS LTD Team
Mr.Neeraj Saini Head of Company and Insparation for JMV Innovative Product for Earthing &
Protection.
Mr.Mahesh Chandra Manav Head of Branding and belive Make In India Govt of India Programme.
Mrs.Mousumi C From Sales
Ms.Manisha Singh from Technical and Design
Ms.Meenakshi from MD Desk and OPS
Contact us Sales@jmv.co.in; neeraj@jmv.co.in Visit webpage www.jmv.co.in T-91-1204590000
We have some photograp while presentation is somebody require plz share their Gmail IT for Sahring
drive related to photo.
Special Thanks from India
Central Institute for Rural Electrification (Rural Electrification Corporation
Ltd )

3. Solar Power
Generation -
Grid Enabling
10th July, 2017-04 August, 2017
ITP Participants
List
Sl. No. Name of the Executive Country Designation
ITEC /
SCAAP
1 Mr. G RAJESHWAR RAO CIRE, HYD Executive -
2 MR. MURIED SOFIZADA AFGHANISTAN
Power Engineer,
Substation Manager
ITEC
3 Mr. BINOD SHARMA BHUTAN TECHNICAL OFFICER ITEC
4 MS.TSHERING PELDEN BHUTAN Junior Engineer ITEC
5
DR. MUNA SABAH QASIM
ALJAWABIR
IRAQ
Director of follow up
division
ITEC
6 MR. SANI LAWAN NIGER
LABORATORY
ASISTANT
ITEC
7 MR.ALI SEYNI ABDOULAHI NIGER technical responsible ITEC
8 MR. STEPHEN SIRI SOUTH SUDAN ASSISTANT LECTURER ITEC
9 MR. THILANKA ALWIS SRI LANKA
Consultant (Chemical
and Process
Engineering)
ITEC
10 MR. THOI NGUYEN VIETNAM University Lecturer ITEC
11 MR.SALIFU GINDEH GAMBIA Mechanical Engineer SCAAP
12
MR.STEPHEN WEKESA
MANG'ENI
KENYA INSTRUCTOR SCAAP
13
MS.YUCABETH NYABOKE
NYAMWAYA
KENYA INSTRUCTOR SCAAP
14 MR MANYORI JUMA KAPESSA TANZANIA ELECTRICAL ENGINEER SCAAP
15 MR.JUMBE OMARI JUMBE TANZANIA Mechanical Engineer SCAAP

5. A Warm Welcome To
All
At JMV LPS LIMITED

6. Global Threat and Impact
Global Warming
Reducing Water Sources for Drinking
Ground Water Level Lowering
Increasing Carbon on Environment
Low Green Color on Earth(Tree)
Why This is happening
We feel that Nature is Free and Gifted
Thinking for ourself not for our future Generation
Our Thinking is very Limited to ourself and Surrounding
What We all have do
Use Nature Precisely and Think for Globe
Sun Wind Water and Earth
Maintain Harmony with all Four
Balance between Need and Greed
All Life are Equal Important and There is Limitation
Lesson to Gain Use and Save

7. Welcome SUN to Ground Let Use for All

8. Method of Present Power Generation
• Power Generation use of Coal , Gas, Liquid Fuel
• Power Generation use of Wind
• Power Generation use of Water(Hydro)
• Power Generation use of Waste/Baggass
• Power Generation through Fly Wheel
• Power Generation Through Use Chemical & Nuclear
• Power Generation Through other Kinetic Energy
• Require Huge Infrastructure and Raw Material (Storing and Handling).
• Disposal has to Handle
• Impact on Environment (Pollution)
• Vibration and Sound Pollution
• Reducing Natural Resources for Burning to Generate Power .
• High Cost of Generation and Further Loss due to Long Transmission ,
distribution and Theft.
• Huge to Pay Cost for SCRAP and Threat for Disposal.
• Dependency with Huge Staff and Their Union
• High Maintenance and Protection from Accidents Incidental
• Payments Cycle Increase and Power Generation Reduce over Period of Time.
• Resale value Difficult

9. Follow Sun Power /Follow Green Power /Follow Free
Generation & Store of Power
Safe Practice in Earthing and Protection

11. • Solar Power Now Changing Many Phases
• Use with Genset
• Use with Wind Power
• Use with High Energy Storage(Battery)
• Installation on Ground/Cannel Mounted
• Installation on Roof (Building)
• Installation on Water (Floating)
• Installation on Building(BIPV Building Integrated
Transparent Photovoltaic Solar Glass

15. External/Internal Surge Source

16. An Arcing Fault is the flow of current through
the air between phase conductors or phase
conductors and neutral or ground.
Concentrated radiant energy is released at
the point of arcing an a small amount of time
resulting in Extremely High Temperature.

18. Fire Accident in Solar PV Power Plant
Reason Lose Contact Earthing Disorder and
Lightning

19. Solar Panel Fire Accident

20. More Picture Fire in Solar PV Power Plant

21. Damages Due To Lightning

22. Fire Component Level

23. Solar PV Power Plant

24. Surge in Systems and Result

25. Surge in DC Application

26. Sikhana to Padega Hi Follow Electrical Safety

27. Follow Safety in Electrical Installation Shocks

29. Earthing Design and Require Result
• For substation Large Power below 1.00Ohm
• For substation Small Power below 2.00Ohm
• SCADA/TELECOM and Automation For substation
Large Power below 0.50Ohm
• Tower and Other Structure between 8-15Ohm
• Lightning Surge Protection 50KA below 5Ohm or 100KA
between 8-15Ohm
• Follow Standard IEC /IEEE
• Recommended use of Hybrid Metal to Protect from Theft
Copper Clad Steel/Alumineum Clad Copper
• Exothermic weld IEEE 837

37. Products

38. Copper Clad Steel/ Aluminium Conductor
For Electrical Installation
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper.
These conductors/ wires or strands are equipped with the strength of steel with the conductivity and copper
with the better corrosion resistance property. The concentric copper cladding is metallurgic ally bonded to a
steel core through a continuous, solid cladding process using pressure rolling for primary bonding. The
copper cladding thickness remains constant surrounding steel. We use different steel grades for the steel
core result in Dead Soft Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in
Annealed and Hard drawn. We are delivering products with varied conductivity and tensile strength as per
the customer need. Further, the wire can be processed to be silver plated or tinned copper clad steel wire.

39. Most Efficient Joint Process
It is efficient and superior to all existing surface –to-surface
mechanical retention connectors.
https://www.youtube.com/watch?v=ijdF5hK-MAk

40. What is Exothermic Welding System?
Copper to Bi-Metal and Aluminium
Types of Exothermic Joints:
Possible to join any bi metal except aluminum
Exothermic welding is a process of making maintain free highly molecular bonding process is superior in
performance connection to any known mechanical or compression-type surface-to-surface contact connector.
Exothermic weld connections provide current carrying (fusing) capacity equal to that of the conductor and will
not deteriorate with age.
 It offers Electrical connections between two or more copper to copper and copper to steel conductors.
 Highly portable method as it does not require any external power source or heat source, so it can be done
almost anywhere.
 It provides strong permanent molecular bond among metallic conductors that cannot loosen and further will
not deteriorate with age.
 Connection does not corrode with time and it offers permanent conductivity.

41. Copper Clad Steel Solid ROD and Conductor

43. LIGHTNING FORMATION

44. Facts About Lightning
• A strike can average 100 million volts of electricity
• Current of up to 200,000 amperes
• Can generate 54,000 oF
• 10/350MicroSec/50KA Fault Current/Discharge in Nano
Sec
Protection
Earthing Design100KA Fault Current/Joints Exothermic
/Flexible Down Conductor with Shortest Route & Less
Corner

45. • Lightning Protection Standard use in India
( IEC 62305-3 and 4)
Working Principle Angular No Compromise with Design
Max Protection 30Mtrs from One
No Product warranty from Manufacturer
High Maintenance Require
NFC17-102(2011) Now European Standard(ESE LA)
Working Principle Radius Compromise with Design
Possible with Increasing Qty of ESE
Max Protection 109 Mtr. Radius from One
Manufacturing Warranty and Test Certificate for Products
Available
Maintenance on Call Basis

46. Lightning Risk assessment Study is actually the
measure of risk of a lightning strike and probability
of damages. As Per IEC62305-2.
All these calculations are based on:
lightning strike density in that particular area (provided by OMV i.e. Ng = 8),
Danger for people,
Occupation coefficient of structure,
Relative location of site,
Fire Risk,
Associated services,
Electrical Lines,
Lightning Protection Level,
Surge Arrestor and
Dimensions of installation.

47. Lighting Strike Density (Ng)
It is the measure of lightning strikes per kilometre square per year in the
particular area.
Higher the lighting strike density, higher the probability of lightning strike which needs higher level of
lightning protection level.
Danger for People (h)
It is the factor of presence of people and panic in the building in case of a
lightning strike
No particular danger 1
Low panic level(<=2 floors, < 100
persons
2
Medium risk of panic (< 1000 persons) 5
Difficult to evacuate (disabled people,
hospitals)
5
High risk of panic (> 1000 persons) 10
Hazard for surroundings or environment 20
Contamination of surroundings or
environment
50
Occupancy Coefficient (Lf1)
It is the risk reduction factor with respect to theoccupancy of the building / installation. For example, loss due to lighting strike is higher in
hospital as compared to a store / warehouse.
Structure unoccupied 0.1
Structure normally occupied 0.01
Relative Location of Site (Cd)
It is the risk reduction factor with respect to the location and surrounding of the building / installation. For example, chance of lighting strike is
minimized if the building is near to a high tower.
Structure surrounded by higher objects
or trees
0.25
Structure surrounded by similar or
lower objects
0.5
Isolated structure-No other objects
nearby
1
Isolated structure on top of a hill or a
hillock
2
Fire Risk (rf)
It is the risk reduction factor with respect to the flammability of the material present in the building / installation. For example, in case of lighting strike, loss will be very high at a
gas station as compare to the cement store.
Explosion 1
High 0.1
Ordinary 0.01
Low 0.001

48. Risk Assessment Calculator as per IS/IEC 62305

49. PASSIVE PROTECTION SYSTEM

50. The Simple Rod air terminal is composed from a metallic rod with 2 to 8 m height
dominating the structure to protect, and linked to 2 down conductors minimum,
and 2 earthing systems. The protection radius ensured by this air terminal which is
limited to 30 m more or less (Protection level IV, height = 60 m), especially
dedicated to the protection of small structures or areas like towers, chimneys,
tanks, water tower, antenna masts…
The EN 62305-3 standard describes the installation procedure for these air
terminals.
13 Simple Rods, 13 down conductors, and 13 earthing systems are necessary to
ensure the protection below :

51. The meshed cage protection is composed from a meshing in roof surface and in
the front face around the building. Surrounding the roof surface, and on high
points, capture points are positioned. A conductors’ network is placed at the outer
perimeter of the roof. This network is completed by transverse conductors. The
size of the meshing is 5 to meters, and depends on the efficiency needed for the
protection. On the front face of the building, the down conductors are linked at the
top to the meshing of the roof. And, down, to specific earthing systems. The
distance between two conductors is 10 to 25 meters, and depend on the efficiency
needed for the protection. The EN 62305-3 describes the installation procedure for
this method.
Generally, this method is heavy and expensive, due to the complexity of the
structures to protect.
26 capture points, 26 down conductors and a grounded loop earthing system are
necessaries to ensure the protection of the structure here below :

52. The catenary wires protection is a method closed to the meshed cage
principle, because it is constituted with meshing of the conductors far
from the structure to protect, to avoid any contact with lightning
current. Catenary wires are located over the structure to protect,
connected to down conductors and specific earthing systems. The
width of the meshing and distance between the down conductors must
respect the same rules as for the meshed cage. The EN 62305-3
describes the installation procedure for this method.
Generally, this method is heavy and expensive, due to the complexity of the
structures to protect.

53. The ESE air terminal is a terminal which enables to generate artificially an upward leader
earlier than a simple rod, with an ionization system, in order to establish a special impact on
its point. The capture of the lightning strike being faster than a simple rod, this technology
enables to benefit from larger protection areas, ensuring protection for large dimensions
structures.
The generated protection radius depends on the early streamer emission value of the air
terminal (Δt in µs), its height, and the efficiency of the protection. The protection radius
ensured by this type of air terminal is 120 m (Protection level IV, height = 60 m , early streamer
emission time 60µs) The NFC 17-102 standard describes the installation procedure for this
type of air terminal.
The installation of this type of air terminal is easy and cheaper than other technologies. It can
protect whole buildings with one E.S.E. air terminal. It enables the protection of a structure
and its environment, the protection of opened areas and well integrate in the architecture of a
structure without aesthetic alteration.
1 ESE, 2 down conductors and 2 earthing systems are necessary to ensure the protection below :

55. Installation
ESE AT with radius protection form 32 mtr to 107 mtr.
DMC Insulator .
GI/FRP Mast .
Down Conductor Copper / Copper Cadmium
Cable 70 sq. mm
Copper Bonded Ground Earthing

56. Step – 1
Step – 2
Step – 3
Joint all phase wire/ cable with the help of
crimping tools and lugs
Fixed the separation sheet between all wires/
cables
Close the filled Silicon enclosure from top and
bottom , complete installation is done.
Thimble
Separation Sheet
Gel / Silicon

57. Features :
Provides cable with cable connections and jointing wires in switchboard / electric boxes Being a
jelly it can be easily fit into molds of any shape and size.
Helps in safeguarding electrical connections and also protects electrical connection joints from
catching fire, sparking and leakage current.
Eradicates all the possibilities of fire, electric shocks and sparks, etc. causes due to improper
electrical connection joints and safeguards structure, equipment and person.
Offers safety to your electrical joints from ageing, corrosion, moisture and also observes leakage
current.
Advantages :
Nontoxic
Insulating
Highly reliable operation
Maintenance Free
Repairable
Cost Effective
High repeat value
Elasticity
Shape retention

62. JMV’s Clients

63. Neeraj Saini
Mobile+919910398538
Manav Chandra
Mobile +91 9910398999
manav@jmv.co.in