1. Inspection
Inspections
NK-Tech

2. INTRODUCTION:
NK-Tech’s an emerging par-excellence firm connecting suppliers and one part of the
world with buyers in another. We independently inspect, at international standard,
factories and goods nationwide across the whole supply chain on behalf of consumers
located in the products final market.
NK-Tech is providing its valuable services to well-reputed business circles of local
market like inspection, auditing and certification services. Our sources are strategically
placed providing appropriate services. These needs are continuously resist and we are
willing to evaluate manufacturing and market trends of best survive our customers.
NK-Tech is in the ideal position to help our costumers and client meet the quality,
safety and ethical standards irrespective of their or their customer’s location in the
Karachi city. Our mix of testing inspection auditing and consultancy services are
unparallel in the consumer goods arena making the NK-Tech the supplier of choice for
making of the world’s leading brands.
NK-Tech is achieving a good reputation for providing independent third party
inspection and testing services. You can be the one who benefits from our experience as
we inspect products on our behalf at all stages from the sourcing factories, through the
manufacturing process to delivery they are:
 Factory Evaluation.
 Pre-Production inspection.
 During Production Inspection.
 Final Random Inspection.
 Supervision of leading.
We have relevant inspectors trained to inspect our product line which includes the
following categories:
1. Textile Fabric.
2. Garments (Knitted & Woven).
3. Testing. (Collection and Technical Support with an Independent Source).
NK-Tech

3. FACTORY EVALUATION:
Before placing an order with a new manufacturer it is important to ensure that your
quality specifications are fully understood, and that the supplier has adequate
production capability, working conditions, management and quality control processes.
However, manufacturers and importers, equally, need reassurance and advice on the
capabilities of their current production facilities. NK-Tech will provide local auditors to
undertake this evaluation.
PRE-PRODUCTION INSPECTION:
In addition to factory evaluation, our inspectors are available to inspect, by random
sampling, the raw materials and components to be used in apparel production.
DURING PRODUCTION INSPECTION:
As soon as the first goods comes off the production lines, our inspectors are there to
check for any defects or deviation from quality parameters, and to suggest practical &
effective ways in which these can be rectified during the production process.
FINAL RANDOM INSPECTION:
The pre-shipment inspection takes place when the merchandise is completed, packed
and ready for shipment. Our inspectors pull a random sample of finished goods, based
on the internationally recognized statistical random sampling technique, commonly
known as ANSI/ASQC Z1.4, BS 6001-1 & ISO 2859-1. We verify quantity workmanship,
function, color, size specifications and packing details, all with a view to ensure that the
contract specifications are met.
SUPERVISION OF LOADING:
This service is offered at the manufacturer’s premises, warehouse or forwarder during
containerization after our Final Random Inspection. NK-Tech can co-ordinate with the
manufacturer to observe that the proper environmental conditions, cleanliness and
integrity of the containers are adequate for the transport of the shipment to its final
destination.
NK-Tech

4. INSPECTION:
ANSI/ASQC Z1.4/MIL-STD-105E/BS6001/ISO2859
It is a random sampling inspection method by attributes based on the mathematical
theory of probability. This method provides the number of samples to be inspected in a
given lot/shipment size. It also provides the specific criteria for acceptance or rejection
of a shipment/lot based on the number of defects found, and provides a fair
assessment, to both buyers and sellers, of product quality.
Acceptable quality level (AQL) is the minimum percentage defective that, for purpose
of sampling inspection, can be considered satisfactory as a percentage average. It
should be agreed upon between both buyer and seller.
Table I - Sample Size Code Letters
(source ANSI/ASQC Z1.4-1993)
Lot or Batch Size
Special Inspection Levels General Inspection Levels
S-1 S-2 S-3 S-4 I II III
2 to 8 A A A A A A A
9 to 15 A A A A A A A
16 to 25 A A A B B C D
26 to 50 A B C B C D E
51 to 90 B B C C C E F
91 to 150 B B D C D F G
151 to 280 B C E D E G H
281 to 500 B C E D F H J
501 to 1,200 C C F E G J K
1,201 to 3,200 C D G E H K L
3,201 to 10,000 C D G F J L M
10,001 to 35,000 C D H F K M N
35,001 to 150,000 D E J G L N P
150,001 to 500,000 D E J G M P Q
500,001 and over D E K H N Q R
NK-Tech

5. NK-Tech

6. FABRIC INSPECTION:
Fabric inspection focuses on fault/defect rate, color, end to end and edge to middle
shading, hand/handle and appearance. The client will select the appropriate fault rate
and standard to determine the acceptance of each shipment. This will minimize the
quantity of panels or garments rejected for fabric faults, thereby ensuring the quality of
the finished goods. Fabric inspection is also considered as pre-production inspection for
garments or other textile products.
What is the 4-points system? This is issued by the American Society for Testing and
Materials with reference to the designation: ASTM D5430-93 Faults are scored with
penalty points of 1, 2, 3 and 4 according to their size and significance.
The following aspects are assessed:
 Color We can also access fabric
 Fabric faults fault/defect rates against other
 Shading systems as required by the client,
 Length for example jersey fabric are
 Usable width often expressed in meters
 Fabric hand/handle per fault/defect.
 Appearance
 Packaging
 Quantity
Size of defect (length in inches) Penalty points
3 inches or less 1
Over 3 inches but less than 6 inches 2
Over 6 inches but less than 9 inches 3
Over 9 inches 4
WHO WE ARE:
We place value on creativity, personal responsibility and building trust in our relationships with
colleagues and customers. We strive to create a productive, collaborative work environment that
encourages each person to contribute toward achieving our business objectives.
NK-Tech inspections.
NK-Tech

7. Having Expertise With Following Buyers & Stores:
 Cougar Inc.
 Tultex, Independent Trading Company, Reebok & Dunbroke.
 Dynasty Apparel Inc.
 Dickies, Stitches, W. D. Retailers, Fried Mayer, Batch Stock & JC –Penney.
 Happy Kids.
 Mecca (Boys, Girls & Children), And1, Blue Marlin, Calvin Klein (CK), JC –Penney &
Wal-Mart Inc.
 Multiple Customers.
 Steve & Barry’s 4004 Inc.
 Russo Apparel Group.
 Outer Stuff.
 Knights Apparel.
 J. America.
 M. J. Sofee.
 Local Boy’z Inc.
 Massive Apparel.
 K-mart Inc.
 Levis Inc.
 Ecko Un Ltd.
 Razzle-Dazzle Inc. (RD).
 Jenna Lane.
 Bugle Boy.
 Drummer Boy.
 Mothers Works Inc.
 Getracan Inc.
 Cossaco Inc.
 Permit Inc.
 Gitano Inc.
 Contact Person M. Asif Noor Khan.
 Cell # +92321-2384787.
 e-mail: nktechinsp@gmail.com
NK-Tech inspections.
+920321238478