Wilson aug 2016

1. Kory L. Wilson
3614 STONE CREST COURT • RICHMOND, TX 77406
281-381-7638 • WILSONSUBSEA@YAHOO.COM
Page 1 of 2
Objective:
Seeking a position as a Subsea Superintendent or Sr Subsea Engineer that will provide an opportunity for me to utilize and
challenge my technical skills.
Qualifications:
I am a well-organized, self-motivated individual. I have been working on DP and Moored MUX control drilling systems
and production systems for over 20 years. I have over 10 years experience as a Sr. Subsea Engineer on at least 14 5th
generation DP oilrigs and drill ships, 20 other rigs with MUX controls (Cameron/Shaffer/Hydril) and non-MUX BOP
rigs. I was on the manufacturing and commissioning team for the BP Thunderhorse Project. While working for Cameron,
I was the lead service engineer installing complete MUX BOP subsea systems on more than six rigs
Professional Certifications:
H2s Recognition Course, DONUT Familiarization, North Sea Basic Water Survival Training,
Isograph Application School, Helicopter Safety Course, Cameron MUX School, NOV MUX School, NOV AHC
School, NOV CMC School, NOVMRT School, OPITO Tropical Basic Offshore Safety, SulfGulf IADC Rigpass,
Well Control School
Technical Skills: Professionalism, Safety Orientated, Team Leader, Trouble Shooting Skills, Tubing bending, Microsoft
Project
Technical Experience:
 Worked with Team Leads and HSE to compose many Commission, Testing and Safety procedures.
 Commission, inspected, repaired & tested Cameron equipment
o Pod – MUX & Conventional (all Generations)
o BOP – T, TL, U, U2
o Rams – Standard, Booster, Super Shears
o Ram Locks – Ram Lock, Wedge Lock, ST Lock
o Annulars – D, DL
o Connectors – DWHC, HC, Model 70
o Riser – HMF, Load King
o Misc. - HPU, Diverter panels, MCS Failsafe valves, Acoustic Pods, Auto Shear & HMF Panels
 Commission, inspected, repaired & tested NOV equipment
o Pod – MUX & Conventional (all Generations)
o BOP – NXT, SLX
o Rams – 14”, 22”, Booster
o Ram Locks – Ultralock II, Ultralock IIB, Pos-lock
o Annulars – Standard
o Riser – DT-2, FT-H, MR6H
o Misc. - HPU, Diverter panels, Acoustic Pods, Deadman Panels
 Commission, inspected, repaired & tested Hydril equipment
o Pod – MUX & Conventional (all Generations)
o BOP – Standard
o Annulars - GK
o Misc. - HPU, Diverter panels
 Commission, inspected, repaired & tested Vetco Connectors – HD, Super HD, LAR
 Operate & pressure tested the BOP on the surface & on the seabed as required.
 Direct the deck and drill crews in the running and recovery of the BOP and Marine Riser equipment.
 Direct the assembly, installation & nipple down the BOP & all well control equipment as required.
 Performed the many job assignments of a Sr. Subsea Engineer such as operate, maintain, ordered parts and repair
the subsea BOP control system.
 Commissioning of Cameron, ABB, Oceaneering, Shaffer and NOV drilling equipment (BOP, Pods, umbilicals,
MUX and Hydraulic reels and surface panels).

2. Kory L. Wilson
3614 STONE CREST COURT • RICHMOND, TX 77406
281-381-7638 • WILSONSUBSEA@YAHOO.COM
Page 2 of 2
 Commissioning of Cameron and Kvaerner production equipment (Trees, Production pods and surface
equipment).
 Commissioning of Cameron Shut down Panels on land wells.
 Commissioning and Installation of Maritime Hydraulics (Aker Kvaerner), Shaffer & NOV BOP Transporter, Tree
Transporter, BOP Crane, Tree Cranes, Moonpool Baskets, Underhull Guides, Riser Tensioners, CMC’s (Crown
Mounted Compensators), AHC (Active Heave Compensators) and DSC (Drill String Compensators).
 Commissioning, Installation and repair of NOV & Cameron Tension Ring, Spider and Gimbals.
 Commissioning, Installation and repair of Cameron & NOV Riser Hydraulic and Manual test tools.
 Installation of Kvaerner and Oceaneering Subsea hydraulic umbilicals.
 Installation of Cameron Electrical master control stations.
 Installation of Kvaerner and Cameron Hydraulic and Electrical flying leads.
 Installation of Customer Specific Transducers. (pressure and temperature)
 Manufacturing, assembly, testing, and installation of Kvaerner, ABB, Cameron and NOV subsea/land hydraulic
and electro hydraulic, production and drilling systems, and intervention equipment.
 Assembly, installation and repair of Cameron & NOV Subsea Electronic Modules. (SEM)
 Integration of units (Customer Specific) with current units already installed.
 Terminated and commissioned Cameron and ABB MUX cables with copper wire and fiber optics.
 Inspected, repaired, and tested Vetco pods, HPU and Diverter panels and wellhead connectors.
 Operated and Maintained WOM Choke Manifold Valves.
 Operated and Maintained Airdyne & Hamworthy HP air compressors.
 Worked with Oceaneering and Sonsub ROV’s.
 Worked on and repaired Hydraulics (Aker Kvaerner) and NOV Rig Main HPU.
 Tube bending (1/4-inch to 2-inch & ¼-inch to1-inch medium and high pressure autoclave)
 Software knowledge (Windows, Microsoft Office, Microsoft Project, Rockwell Software Programs, Excel, Adobe
Acrobat and IsaGRAF 3.30)
Professional Experience:
 Sr. MUX Subsea Engineer, TOI (Deepwater Invictus) Feb 2015
 Sr. MUX Subsea Engineer, Ensco (DS6) Aug2013 – Feb 2015
 Sr. MUX Subsea Supervisor, Seadrill America (West Gemini) July 2010 – July 2013
 Sr. MUX Subsea Supervisor, Seadrill America (West Polaris/Capella) May 2008 – July 2010
 Sr. MUX Subsea Engineer/Surveyor, WEST Engineering February 2005 to May 2008
 Sr. MUX Subsea Engineer, Pride Offshore (Thunderhorse Rig) May 2004 – February 2005
 Service Engineer/Subsea Engineer, Cameron Controls 2000 - 2004
 Service Technician, DEL Packaging 1999 - 2000
 Hydraulic Service Technician, Kvaerner Oilfield Products FSSL Controls 1994-1999
Strengths:
 Highly self-motivated and enthusiastic.
 Dependable and diligent.
 Very organized and goal oriented.
 A team player / work well with others.
 Ability to walk into any situation, assess the problem and solve it fast and effectively.
 Strong troubleshooting skills
Education:
 Houston Community College - Houston, Texas - 1995 (35 hours)
 Wharton Junior College - Sugarland, Texas - 1994 (44 hours)
 McMurray University - Abilene, Texas -1993 (18 Hours)
 Graduated from Kempner High School - Sugarland, Texas - 1992