1. John Tan MIEAust
Permanent Resident
Mobile: 0468 787 675
Email: johntan316@outlook.com
CAREER
SUMMARY
Engineer with 15 years of hands-on experience in installing, maintaining,
troubleshooting and repairing complex electronic and electromechanical
equipment. Constantly liaised with end users / customers in order to ensure that
the final results meet or exceed their expectations. Being part of Multinational
Corporations throughout my engineering career, am confident and comfortable
engaging people in a multicultural and international setting.
PROFESSIONAL EMPLOYMENT
April 2008 >
April 2015
Staff Engineer
X-FAB Sarawak Pte. Ltd. (www.xfab.com/about-x-fab/)
World’s largest analog / mixed-signal foundry group that manufactures
silicon wafers for mixed-signal integrated circuits (ICs). Approximately
2,500 employees in 5 manufacturing sites worldwide.
Based in Sarawak State, Malaysia. Corporate Headquarters: Germany.
Department: Operation Improvement (OPI) – Workshop.
Responsibilities:
Actively involved in the Planning, Handling and day-to-day running of OPI
Workshop.
Carried out hands-on Troubleshooting and Repair of faulty equipment
parts (examples: Power Supplies, Printed Circuit Boards, Electronic
Control Modules and Radio-Frequency Generators).
Analysed, designed and implemented modifications on existing and
obsolete parts in order to improve their performances.
Sourced and evaluated 2nd Source Suppliers (for electronic, electrical and
mechanical components / parts).
Project Management: Formed and headed teams for new internal Projects.
Conducted Technical and Safety Trainings for engineers and technicians.
Contributed in achieving the company’s Annual Cost Savings target.
Assessed OPI Workshop’s needs for Additional Tools and upgrading of
Technical Skills.
The liaising Contact-Person for OPI’s Corporate Social Responsibility
Project (Community Project with “Samarahan’s Centre for the Physically
Disabled”).
Achievements:
Promoted from Senior Engineer I to Staff Engineer in June 2014.
Successfully led a team to set up “Pump Servicing’s Workshop” in X-FAB
(2014) within a tight Schedule and Budget.
Team Leader for the winning teams for X-FAB’s CEO Awards, 2014
(Categories: Productivity, Smart Idea and Cost Saving).
Promoted from Senior Engineer II to Senior Engineer I in May 2010.
Successfully co-led the Workshop Team in exceeding OPI Workshop’s
Annual Cost Savings target (Key Performance Index) for 7 consecutive
years. (2014’s result: >USD 1.5 million saved)
2. March 2000 >
August 2007
Field Service Engineer (Senior)
ZMC Technologies (M) Pte. Ltd. (www.zmc.net)
Business Solutions Provider in the field of Semiconductor, Petrochemical,
Photovoltaic, LED and Industrial Chemicals. Approximately 70 employees
with offices in 6 countries in Asia.
Based in Sarawak State, Malaysia. Corporate Headquarters: Singapore.
Department: Semiconductor - Service.
Responsibilities:
ZMC Malaysia’s chief Consultant for Asher Systems / Equipment.
Carried out hands-on Installation, Preventive Maintenance and Servicing of
production floor equipment (electronic, electrical and mechanical parts).
Actively involved in Troubleshooting and Rectifying equipment problems /
issues.
Provided technical support to Regional Customers in Singapore and
different states in Malaysia.
Person-in-Charge of the Qualifying and Commissioning of Equipment for
newly arrived Equipment.
Carried out upgrading works and modifications on Equipment.
Person-in-Charge of the TEACHING for Robotic Arms (through Graphical
User Interface).
Chief Trainer: Conducted Equipment Training for Customer that is based in
Kuala Lumpur, Malaysia (2006).
Chief Trainer: Conducted Equipment Training for Customer that is based in
Sarawak, Malaysia (2004, 2005 and 2006).
Achievements:
Promoted from Field Service Engineer to Senior Field Service Engineer in
April 2006.
Investigated and provided the solution for a Customer’s persistent problem
with their Robotic & Transfer System (savings achieved: >USD 100
thousand).
Involved in the team that found the Root Cause for a Customer’s process
issue and successfully implemented the solution (savings achieved: >USD
50 thousand).
QUALIFICATIONS
July 1997 >
December 1999
Bachelor of Engineering - Electrical (Mechatronics),
University of Technology, Malaysia (UTM, Johor State).
Accredited by Engineers Australia.
July 1994 >
March 1997
Diploma of Engineering - Electrical (Power),
University of Technology, Malaysia (UTM, Kuala Lumpur State).
Accredited by Engineers Australia.
CONTINUOUS PROFESSIONAL DEVELOPMENT
Oct 2014 Attended Training on “Industrial Vacuum Pump’s Servicing and Repair”.
Aug 2014 Attended Training on “Project Management Skill”.
Oct 2013 Attended Training on “SPC” (Statistical Process Control).
3. Jun 2012 Attended Training on “Technical Report Writing”.
Sep 2011 Attended Training on “Swagelok: Basic Safety & Installation”.
May 2010 Attended Training on “8D: Problem Solving Methodology”.
Nov 2009 Attended Training on “Chemical Hazards and Safety”.
Mar 2009 Attended Training on “QOS” (Quality Operating System).
Sep 2003 Attended Training on “Cleanroom Standard and Safety Protocol”.
May 2000 Attended a Safety Course conducted by DOSH (Department of Occupational
Safety and Health, Malaysia).
MEMBERSHIPS / SUBSCRIPTIONS
2014 > Present Member (MIEAust),
The Institution of Engineers Australia.
2010 > Present Global Spec’s Online Newsletters: Electronic Product Design, Power Generation &
Distribution, Machine & Motion Controllers, Alternative & Renewable Energy.
2009 > Present Global Spec’s Online Newsletters: Engineering Management, Industrial
Automation.
2008 > Present Global Spec’s Online Newsletters: Electronic Components, Electrical Components,
Power Transmission, Motor & Drive.
2003 > Present Graduate Engineer,
Board of Engineers, Malaysia.
(Accredited as Professional Engineer by Engineers Australia in 2010.)
STRENGTHS Able to work well in a team or group environment and am a keen learner.
SKILLS Language Abilities:
Spoken: (1) English (2) Bahasa Malaysia (3) Hokkien
Written: (1) English (2) Bahasa Malaysia
Organisational / Leadership Abilities:
Co-organised day-to-day activities of OPI Workshop (X-FAB Sarawak).
Led the Sarawak State’s Operation from 2003 to 2007 (ZMC
Technologies).
Computer / Software Abilities:
Operating Systems: Windows XP, Windows 7, Windows 8.1
Microsoft: MS Word, MS Excel, MS Power Point, MS Outlook
Programmable Relay / Controller: Omron ZEN V2, Yaskawa Motion
Controller
Driving Ability:
Valid Class C (Car) international driver licence.
To obtain Queensland’s Class C (Car) driver licence in Q3 2015.
4. HONOURS
2014 CEO Award, Year-End Award, Overall Winner for “Productivity” (X-FAB
Sarawak, Malaysia).
2014 CEO Award, Quarterly Award, 4th Quarter Winner for “Smart Idea” (X-FAB
Sarawak, Malaysia).
2014 CEO Award, Quarterly Award, 2nd Quarter Winner for “Cost Saving” (X-FAB
Sarawak, Malaysia).
1999 Dean's List (Faculty of Electrical Engineering, University of Technology,
Malaysia).
1998 Dean's List (Faculty of Electrical Engineering, University of Technology,
Malaysia).
1997 Dean's List (Faculty of Electrical Engineering, University of Technology,
Malaysia).
1995 Dean's List (Faculty of Electrical Engineering, University of Technology,
Malaysia).
EXTRA-CURRICULAR ACTIVITIES
2010 - 2015 Participated in fortnightly Indoor Soccer / Futsal games.
Participated in fortnightly Badminton games.
2010 Participated in X-FAB Sarawak’s Inter-Department Indoor Soccer Tournament
(1st Runner-Up).
2009 Participated in X-FAB Sarawak’s Inter-Department Badminton Tournament
(Champion).
1997 Participated in UTM's Soccer Tournament (Champion).
1996 President of “Student’s Christian Fellowship Group”, UTM.
1993 Attended First Aid courses. Obtained “Basic” and “Intermediate” First Aid
certificates (Malaysian Red Crescent / Cross Society).
1992 Participated in Drug Awareness Poster Competition (Lion’s Club).
Participated in the Beautification of the Paediatric Unit (State General Hospital).
INTERESTS Sports, Reading, Movies.
REFEREES Mr. Lim Poh Beng (Principal Engineer @ Senior Section Manager)
X-FAB Sarawak Pte. Ltd.
1 Silicon Drive, SamaJaya Free Industrial Zone
93350, Kuching, Sarawak, Malaysia
Phone: + 6082 354 888, ext. 1245
Mr. Lau Yoon Fatt (General Manager, Malaysia)
ZMC Technologies (M) Pte. Ltd.
1-3-23, Krystal Point 2, Lebuh Bukit Kecil 6
11900, Pulau Pinang, Malaysia
Phone: + 604 646 4586