Jayanta Das is a mechanical engineer currently working as a senior engineer at Bhushan Steel Limited in Angul, Odisha. He has over 15 years of experience in plant maintenance and utility roles. He holds a diploma in mechanical engineering and bachelor's degree in science. His responsibilities have included equipment erection, commissioning, operations, and maintenance roles. He is seeking new opportunities and aims to take on more leadership responsibilities over the long run.

1. C U R R I C U L U M V I T A E
JAYANTA DAS
42,PALLI SREE,NEAR NABARUN SANGHA CLUB,
A.J.C.BOSE ROAD
P.O. - SODEPUR
KOLKATA – 700110
WEST BENGAL
Telephone : 08763802590
09748459095
Email : jdkdcal@gmail.com
j.das61@yahoo.co.in
GOAL
I look forward to a career that provides me an opportunity to continuously enhance
my skill & leadership quality through challenging responsibilities and by working in a
team with people having diverse capabilities and personalities. In the long run I will
like to grow to a senior position from where I can make a meaningful contribution to
the organization & society as a whole.
CURRENT STATUS
Currently employed with Bhushan Steel Limited. Dhenkanal, Orissa. (an
3.6 MTPA Integrated steel plant ) in COKE OVEN PLANT#1 Battery 1 and 2
(Shougan.China designed) and COKE OVEN PLANT #2 Battery 1 ,largest
coke oven battery in Asia (Paul wurth designed) as Mechanical UTILITY
DEPT. SR.Engineer. From Oct 2013 To till date.
Executing projects and commissions of 0.85 MTPA Recovery type and 1.3
MTPA .Recovery Type Coke Oven plant (battery proper) and By Products
Plant (partly) involving Equipment erection and maintenance job.
Job responsibilities:
1. Co-ordination with consultant, vendor & subcontractor.
2. Developing project scheduling, Resource planning, activities.
Co-ordination with client / vendors / statutory bodies/ local
authorities.
3. Erection, testing, commissioning of Cooling Towers, Plate Heat
Exchanger, Auto clean filter, various type of pumps and utility
piping,Febrication,mechanical erection and Testing including
all Air(compressed and industrial) ,Nitrogen, Ammonium liquor,
Water(Drinking and industrial), Steam pipe lines,Fire hydrant pipe lines.
4. Procurement of IBR piping, valve and accessories for installation
of Steam line for Coke oven and By-product area.
5. Fabrication, erection and testing of COBP Gas line varying from
Dia.1400 mm to Dia. 500 mm.
6. Stem pipeline with IBR approval.

2. 7. Fabrication, erection and testing of water and service line varying from
Dia.900 mm to Dia. 80 mm
8. Operations and Maintenance of VOLTAS make H.V.A.C Chiller and
. steam uses VAM Chiller.
9. Maintenance and Overhauling of air cool air-conditions m/c make
. WEISSHAAR Companies type- KTG-1021 And KTG-361
10. Maintenance and Overhauling of Atlas cop co make Air compressor type
. GA11F,GA 90FF, GA 7FF, GA 15 , GA120
11. Operations and Maintenance of ANY companies make Split A.C.&
Window A.C
JOB PROFILE:
• Maintenance & overhauling of Diesel engine (make :DOOSAN,KOREA
SJ400E& SJ200E .MODEL-P158LE & MODEL- PO86TI) ATLAS COPCO
COMPRESSOR. Maintenance of moving m/c (Pusher Car,Coke Transfer
Car, Charging car & Quenching Car).Carry out on site and off-side
works as per the requirement and commissioning of any type of pump
in By-product area. Overhauling Of HYDRALIC CYLINDER & HEAT
EXCHANGER. Work as Break Down Annalist in By- product plant to
control the Break Down & Production and proper manpower handling.
EXPERIENCE
Working at M/S Hindustan National Glass & Industries Limited, Rishra,
West Bengal, as mechanical Engineer (Maintenance & Utility).
A unit of “Somany Group” manufacturing flint/amber/green glass containers.
Plant located at Rishra, West Bengal/ Bahadurgarh, Haryana/ Rishikesh,
Uttaranchal & Pondicherry having ISO 9001-2000. At Rishra they are having
350 tpd. 250 tpd. & 150 tpd. capacity furnaces. Company introduces TPM
(from 2003) and SAP (from 2009).
ACADEMIC PROFILE
Course Institution University/Board Year
Diploma in
Mechanical
Engineering
I.T.I &
A.I.T.T
Graduation
(Science)
Higher
Secondary
(Science)
Madhyamik
(Secondary)
North Calcutta
Polytechnic
(Kolkata)
Gariahat, Balligung
Bangabashi Collage
Kolkata
N.S.U.B
Agarpara
U.A.U.B(BOYS),
Agarpara
West Bengal State Council for
Technical Education
Technical Education
Calcutta University
West Bengal Council for Higher
Secondary Education
West Bengal State Board of
Secondary Education
2001
1996 & 1998
1993
1991
1989

3. JOB PROFILE
Hindusthan National Glass & Industries Limited (january 2006 – 21th oct
2013 ):
Looking after the plant maintenance & utility comprising off :-
 Compressors : Screw Comp., Reciprocating Comp.,
Centrifugal Comp.
 DG Set : In line Vertical & “V” type Engines
 Pump : Turbine pumps, Submersible pumps,
Centrifugal pumps, Gear pumps,
multistage pumps, LPG decanting
Pumps,
 Cooling Towers : Cross Flow Type
 Water Softening Plant : DM Plant, RO Plant
 Blowers : Centrifugal Type
 Cold End Equipments : Annealing Lehrs, Single Liners ,
Online
& Offline Shrink Wrapping machines,
Stretch Wrapping Machines, Convey-
or, Lifts, Auto Inspection m/c s etc.
 Raw Material Handling Equipments
Major Project handled :
Responsible for 250 TPD furnace projects – Erection and commission of
following equipments at Rishra in the year of 2009.
Single Liners.
Auto Inspection M/c.(SGCC & MSC Make)
On Line Auto Shrink Wrapping M/c.
Off Line Shrink Wrapping M/c.
Lehrs. (Karmet & Pennekamp Make)
Blowers. (Flakt Woods)
Cold end spray m/c (Revimac & Grafoidal Make).
Hot End coating m/c (Revimac Make).
Clean Room.Auto inspection m/c(S.G.C.C, M CAL M/C)
Air Washery Plant.
Stretch Wrapping M/c (ITW Make).

4. Computer Qualification
(i) First hand knowledge of basic computers.
(ii) Professional knowledge of Microsoft office
(iii) MS Office, SAP
Linguistic proficiency
To Speak/Read/Write : Bengali/English/Hindi
Working Experience :
Name of Company Post Working for
1) OTIS Elevator Co.
(India) Ltd., Kolkata.
Maintenance supervisor One Year (2nd
December,
1996 to December, 1997)
2) KONE Elevator Co.
(I) Ltd., Kolkata.
Mechanical (Installation) Two Years
3) Technocon Services
(KIRLOSKAR OIL
ENGINE LTD.)
Service Engineer
(Pielstick, Large/ Marine
Engine) (Kirloskar Medium
Engine)
Joined on 18th
September,
2000 to 31th DECEMBER
2005.
4) Hindusthan National
Glass & Industries
Limited .
COLDEND ENGINEER.
plant maintenance , utility and
Cold End Equipments :
Annealing Lehrs,
Single Liners , Online Packing
m/c,online Inspection m/c.
2nd
January2006 to 21th
October 2013.
5)BHUSHAN STEEL
LTD.ANGUL,ODISHA
MAINTENANCE FOR UTILITY
SR.ENGINEER(COBP-II).AND
BY PRODUCT AREA.
21th October 2013. TO TILL
DATE.
Geographical area of work : INDIA
Name of Employee : M/S TECHNOCON SERVICES
(Authorised Services Dealers of
M/S KIRLOSKAR OIL ENGINE LTD.)
Period of Employment : 17th
September 2000 to 31th
December 2005
Position : Service Engineer
Key Responsibility
Diesel Electrical Power Plant Section
Worked as a Service Engineer with a Mechanical team at various Power
Plants in India, where KIRLOSKAR make medium Diesel Engine (Engine
Capacity 186 HP – 372 HP) and large Diesel Engine SEMT PIELSTICKS
(France) are used (Engine Capacity 2400 HP – 7200 HP).

5. Marine Diesel Engine Section
Overhauling & Repair of KIRLOSKAR make medium Diesel Engine and
large SEMT PIELSTICK (France) range 2400 HP to 7200 HP Diesel Engin,
which used as a main Engine of Indian Navy & Coast Guard Ship. Jobs
carried out at various shipyards in India.
1. G.R.S.E. - KOLKATA
2. H.S.L. - VISAKHAPATNAM
3. NAVAL DOCKYARD
& COAST GUARD - VISAKHAPATNAM
4. G.S.L. - GOA
5. CHENNAI PORT - CHENNAI
Work Done: Overhauling and Repair various types of mechanical items –
heat exchanger, Centrifuge, F/Water.Cooler L.O. Cooler, Motti filter, Pumps,
Valves, Hydraulic items, coupling (any type), Pneumatic valves Turbocharger,
Charger Cooler etc.,
Overhauling & Repair Propulsion equipment – propeller shaft, Ruder etc.,
Training : Plant Training at Nasik – KIRLOSKAR OIL ENGINE LIMITED, for
carried out overhauling of PA6 SEMT PIELSTICK (France), large Diesel
Generator / Marine Population (2400 HP – 7200 HP).
KEY STRENGTHS
 Ability to manage in a fast-paced, changing environment.
 Ability to remain calm under extreme time and quality pressure.
 Attention to detail and accuracy. Excellent interpersonal skills.
 Excellent verbal and written communication skills, strong reasoning
skills.
 Ability to plan and prioritize work and act accordingly.
 Willing to take on challenging assignments.
 Positive attitude and value based outlook with patience.
 Desire to learn and grow with the Organization.
 Ability to grasp, assimilate and articulate the requirements.

6. STRENGTH :
SELF-BELIEF & SELF-CONFIDENCE AND HENCE A DESIRE TO SUCCEED.
REFERENCES :
1. MR. S.K.HALDER. 2. Mr. M. BHASKAR
Sr.V.P (COKEOVEN) G.M (COKEOVEN # 2)
BHUSHAN STEEL LTD BHUSHAN STEEL LTD
ORISSA, ANGUL ORISSA, ANGUL
PH.07077757146 PH. 07077757147
PERSONAL PROFILE
Name : JAYANTA DAS
Father’s Name : Late Sudhir Chandra Das
E-mail I.D. : j.das61@yahoo.co.in
jdkdcal@gmail.com
Date of Birth : 17th
June, 1973
Sex : Male
Nationality / Religion : Indian / Hinduism
Marital Status : Married
Height : 5’7”
Current CTC : 6.0 LACS P.A
Expected CTC : NEGOSIABLE
DECLARATION
I hereby declare that the particulars furnished above are correct and
complete to the best of my knowledge and belief.
Place :ORISSA ( ANGUL)
Date:04.07.2016 JAYANTA DAS

7. STRENGTH :
SELF-BELIEF & SELF-CONFIDENCE AND HENCE A DESIRE TO SUCCEED.
REFERENCES :
1. MR. S.K.HALDER. 2. Mr. M. BHASKAR
Sr.V.P (COKEOVEN) G.M (COKEOVEN # 2)
BHUSHAN STEEL LTD BHUSHAN STEEL LTD
ORISSA, ANGUL ORISSA, ANGUL
PH.07077757146 PH. 07077757147
PERSONAL PROFILE
Name : JAYANTA DAS
Father’s Name : Late Sudhir Chandra Das
E-mail I.D. : j.das61@yahoo.co.in
jdkdcal@gmail.com
Date of Birth : 17th
June, 1973
Sex : Male
Nationality / Religion : Indian / Hinduism
Marital Status : Married
Height : 5’7”
Current CTC : 6.0 LACS P.A
Expected CTC : NEGOSIABLE
DECLARATION
I hereby declare that the particulars furnished above are correct and
complete to the best of my knowledge and belief.
Place :ORISSA ( ANGUL)
Date:04.07.2016 JAYANTA DAS