Manual

1. HPARGUNAM
SPARE PART CATALOGUE
4HI TOWER PRINT UNIT
HILINE

2. HPARGUNAM
GUIDELINES FOR REFERRING & ORDERING THE SPARE PARTS
This catalogue is useful for ordering the Spare Parts for your Press HILINE. In order to ensure a trouble free
and quick delivery of Spare Parts, follow the hints given below for ordering the Spare Parts.
The Spare Part Catalogue is sub divided into the following groups,
01-00 IR/YR Print Unit
03-00 2nd Fold Folder
05-00 Parallel Fold Folder
06-00 Motor Drive Assembly
07-00 Folder Superstructure
08-00 Other Unit
13-00 Tucker IIIrd Fold
17-00 Balloon Former
20.00 4HI Tower Print Unit
21.00 Standalone Reel Splicer
The further assemblywise sub-groups alongwith Figure/Sr.No. of the Spare Part are mentioned in the Spare
Part Catalogue.
EXAMPLE FOR ORDERING THE SPARE PART
The following procedure is to be adopted for ordering the Spare Part. (For example: Bearing Bush PC1 (SI)
of the 4HI Print Unit). As Bearing Bush PC1 (SI) belongs to 4HI Print Unit, you have to locate the sub-groups
in 20.00 i.e. in 4HI Print Unit Group. The Bearing Bush PC1 (SI) belongs to Bearing Bush Assembly having
sub-group No.20-03. After this findout the Sr.No. of the Bearing Bush PC1 (SI) from figure. The Figure No. of
the Bearing Bush PC1 (SI) is 09.
Now, the Spare Part Catalogue Number of the Bearing Bush PC1 (SI) is to be mentioned as below,
20 03 09 L915.32-4162.0/3
Drg. No. of the Part
Sr.No. of the Part
Sub-Assembly Group
Main Unit Group
ORDERING OF THE PARTS
While ordering Spare Parts, please indicate the following
1. Product Number of the Machine
Mentioned on A2 pages of manuals.
2. The complete catalogue number and description of the Part.

3. HPARGUNAM
Whereever applicable refer new name instead of existing name
EXISTING NAME NEW NAME
1. Product - Hiline OR 4HI Product - HILINE
2. H Print Unit IR Print Unit
3. Y Print Unit YR Print Unit
4. Hiline 45 Unit 4HI/2HI Tower Unit
5. Dancing Roller Swinging Roller
6. Ink Duct Ink Fountain
7. Ink Duct Roller Ink Fountain Roller
8. Autopaster OR Flying Splicer Reel Splicer (Integrated OR Standalone)
9. Dripping Pan (used under Ink Duct) Ink Collecting Pan
10. Scoring Roller Film Roller
11. Ink Take Off Roller Ink Transfer Roller
12. Tension Roller/Infeed Roller before former Roller Collecting Roller
13. Folder Infeed Folder Superstructure
14. PIV Drive Variator Drive
15. Cutting Cylinder Knife Cylinder
16. Gripper Cylinder Folding Jaw Cylinder
17. Sheet Batching Copy Kicker
18. Web Trolley/Reel Truck Reel Trolley
19. Pneumatic Tension Shaft Tensioning Spindle
20. Paper Guide Roller of dilitho printing Web Lead Roller
21. Adjusting Roller Assly. (Between PU) Colour Register Assly.
22. Cut-Off Control Cut-Off Register

8. L533.22-11493.0/2 PLATE CYLINDER ASSY.(RIGHT) 533 C/O (RIGHT)
L533.22-11494.0/2 PLATE CYLINDER ASSLY.(LEFT) 533 C/O (LEFT)
L546.22-11497.0/2 PLATE CYLINDER ASSLY.(RIGHT) 546 C/O (RIGHT)
L546.22-11498.0/2 PLATE CYLINDER ASSLY.(LEFT) 546 C/O (LEFT)
L560.22-11501.0/2 PLATE CYLINDER ASSLY.(RIGHT) 560 C/O (RIGHT)
L560.22-11502.0/2 PLATE CYLINDER ASSLY.(LEFT) 560 C/O (LEFT)
L578.22-11505.0/2 PLATE CYLINDER ASSLY.(RIGHT) 578 C/O (RIGHT)
L578.22-11506.0/2 PLATE CYLINDER ASSLY.(LEFT) 578 C/O (LEFT)
01-01/2
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L533.22-11491.1/1 PLATE CYLINDER (RIGHT) 533 C/O (RIGHT)1.00
L546.22-11495.1/1 PLATE CYLINDER (RIGHT) 546 C/O (RIGHT)1.00
L560.22-11499.1/1 PLATE CYLINDER (RIGHT) 560 C/O (RIGHT)1.00
L578.22-11503.1/1 PLATE CYLINDER (RIGHT) 578 C/O (RIGHT)1.00
0002 L533.22-11492.1/1 PLATE CYLINDER (LEFT) 533 C/O (LEFT)1.00
L546.22-11496.1/1 PLATE CYLINDER (LEFT) 546 C/O (LEFT)1.00
L560.22-11500.1/1 PLATE CYLINDER (LEFT) 560 C/O (LEFT)1.00
L578.22-11504.1/1 PLATE CYLINDER (LEFT) 578 C/O (LEFT)1.00
0003 L533.02-5005.1/3 MACKLING RING 533 C/O (LEFT)2.00
L533.02-5005.1/3 MACKLING RING 533 C/O (RIGHT)2.00
L915.31-1755.1/3 MACKLING RING 546 C/O (LEFT)2.00
L915.31-1755.1/3 MACKLING RING 546 C/O (RIGHT)2.00
L915.32-1756.1/3 MACKLING RING 560 C/O (LEFT)2.00
L915.32-1756.1/3 MACKLING RING 560 C/O (RIGHT)2.00
L915.33-1801.1/3 MACKLING RING 578 C/O (LEFT)2.00
L915.33-1801.1/3 MACKLING RING 578 C/O (RIGHT)2.00
0004 NS029/017 SOC. HD. CAP SCREW M12X506.00
0005 NS073/028 SPRING WASHER AM 126.00
0006 L361.10-4438.1/4 END DISK SII2.00
1 2/

9. L533.22-11493.0/2 PLATE CYLINDER ASSY.(RIGHT) 533 C/O (RIGHT)
L533.22-11494.0/2 PLATE CYLINDER ASSLY.(LEFT) 533 C/O (LEFT)
L546.22-11497.0/2 PLATE CYLINDER ASSLY.(RIGHT) 546 C/O (RIGHT)
L546.22-11498.0/2 PLATE CYLINDER ASSLY.(LEFT) 546 C/O (LEFT)
L560.22-11501.0/2 PLATE CYLINDER ASSLY.(RIGHT) 560 C/O (RIGHT)
L560.22-11502.0/2 PLATE CYLINDER ASSLY.(LEFT) 560 C/O (LEFT)
L578.22-11505.0/2 PLATE CYLINDER ASSLY.(RIGHT) 578 C/O (RIGHT)
L578.22-11506.0/2 PLATE CYLINDER ASSLY.(LEFT) 578 C/O (LEFT)
01-01/2
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0007 NS073/010 SPRING WASHER BM 162.00
0008 NS033/076 HEX. HEAD SCR. M16x60 -10.92.00
0009 NS075/105 FEATHER KEY 18X11X631.00
0011 L560.02-20019.1/4 REGISTER WEDGE I2.00
0012 L560.02-20020.1/4 REGISTER WEDGE II2.00
2 2/

11. L533.22-5978.0/2 BLANKET CYL.ASSY.(RIGHT-LOWER) 533 C/O RIGHT
L533.22-5979.0/2 BLANKET CYL.ASSY.(LEFT-UPPER) 533 C/O LEFT
L546.22-3836.0/2 BLANKET CYLINDER ASSLY.(RIGHT) 546 C/O RIGHT
L546.22-3837.0/2 BLANKET CYLINDER ASSLY.(LEFT) 546 C/O LEFT
L560.22-7480.0/2 BLANKET CYLINDER (RIGHT-LOWER) 560 C/O RIGHT
L560.22-7481.0/2 BLANKET CYLINDER(LEFT-UPPER) 560 C/O LEFT
L578.22-4665.0/2 BLANKET CYLINDER(RIGHT-LOWER) 578 C/O RIGHT
L578.22-4666.0/2 BLANKET CYLINDER(LEFT-UPPER) 578 C/O LEFT
01-02/1
GROUP
ST.STEEL S.GAP
REV - 001 9/12/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L533.22-5974.1/1 BLANKET CYLINDER (RIGHT-LOWER) 533 C/O RIGHT1.00
L546.22-3832.1/1 BLANKET CYLINDER (RIGHT) 546 C/O RIGHT1.00
L560.22-7476.1/1 BLANKET CYLINDER BLANK (RIGHT) 560 C/O RIGHT1.00
L578.22-4643.1/1 BLANKET CYLINDER (RIGHT) 578 C/O RIGHT1.00
0002 L533.22-5975.1/1 BLANKET CYLINDER (LEFT-UPPER) 533 C/O LEFT1.00
L546.22-3833.1/1 BLANKET CYLINDER (LEFT) 546 C/O LEFT1.00
L560.22-7477.1/1 BLANKET CYLINDER BLANK (LEFT) 560 C/O LEFT1.00
L578.22-4644.1/1 BLANKET CYLINDER (LEFT) 578 C/O LEFT1.00
0003 L533.02-5005.1/3 MACKLING RING 533 C/O LEFT2.00
L533.02-5005.1/3 MACKLING RING 533 C/O RIGHT2.00
L915.31-1755.1/3 MACKLING RING 546 C/O LEFT2.00
L915.31-1755.1/3 MACKLING RING 546 C/O RIGHT2.00
L915.32-1756.1/3 MACKLING RING 560 C/O LEFT2.00
L915.32-1756.1/3 MACKLING RING 560 C/O RIGHT2.00
L915.33-1801.1/3 MACKLING RING 578 C/O LEFT2.00
L915.33-1801.1/3 MACKLING RING 578 C/O RIGHT2.00
0006 NS077/026 FITTING WASHER 30X40X11.00
0007 L361.10-4223.1/4 WORM WHEEL1.00
0008 NS333/065 BEARING SPACER 30X40X81.00
1 3/

12. L533.22-5978.0/2 BLANKET CYL.ASSY.(RIGHT-LOWER) 533 C/O RIGHT
L533.22-5979.0/2 BLANKET CYL.ASSY.(LEFT-UPPER) 533 C/O LEFT
L546.22-3836.0/2 BLANKET CYLINDER ASSLY.(RIGHT) 546 C/O RIGHT
L546.22-3837.0/2 BLANKET CYLINDER ASSLY.(LEFT) 546 C/O LEFT
L560.22-7480.0/2 BLANKET CYLINDER (RIGHT-LOWER) 560 C/O RIGHT
L560.22-7481.0/2 BLANKET CYLINDER(LEFT-UPPER) 560 C/O LEFT
L578.22-4665.0/2 BLANKET CYLINDER(RIGHT-LOWER) 578 C/O RIGHT
L578.22-4666.0/2 BLANKET CYLINDER(LEFT-UPPER) 578 C/O LEFT
01-02/1
GROUP
ST.STEEL S.GAP
REV - 001 9/12/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0010 L361.10-4468.1/4 RING1.00
0011 NS333/066 BEARING SPACER 30X40X161.00
0012 NS029/006 SOC. HD.CAP SCREW M8X201.00
0013 L361.10-4226.1/4 CLAMPING PIECE1.00
0014 L361.10-4224.1/4 WORM1.00
0015 L361.10-4467.1/4 RING1.00
0016 NS073/028 SPRING WASHER AM 126.00
0017 NS029/017 SOC. HD. CAP SCREW M12X506.00
0018 NS034/008 HEXAGONAL NUT M16X21.00
0019 NS073/010 SPRING WASHER BM 163.00
0020 NS046/002 SPHERICAL LUB HEAD AM8X11.00
0021 L533.02-14208.1/3 TENSION SHAFT (LEFT) 533 C/O LEFT1.00
L560.02-7317.1/3 TENSION SHAFT (LEFT)1.00
0022 L533.02-14207.1/3 TENSION SHAFT (RIGHT) 533 C/O RIGHT1.00
L560.02-7316.1/3 TENSION SHAFT (RIGHT)1.00
0023 NS368/025 PHOSP. BRONZE BUSH 18X25X222.00
0024 L361.10-4438.1/4 END DISK SII2.00
0025 NS033/076 HEX. HEAD SCR. M16x60 -10.92.00
2 3/

14. !
! " "
! " "
" "
# ! $
" # "
%
# ! "
& ' "

16. L361.10-6822.0/1 BEARING BUSH ASSY.BC-1(HMT/FAG BC-1
L361.10-6824.0/1 BEARING BUSH ASSY.BC-2(HMT/FAG BC-2
L361.10-6825.0/1 BEARING BUSH ASSY.BC-3(HMT/FAG BC-3
01-04
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L361.10-6797.0/3 BEARING BUSH ASSEMBLY BC-1 SI BC-11.00
0002 L361.10-6799.0/3 BEARING BUSH ASSEMBLY BC-1 SII BC-11.00
0003 L361.10-6813.0/3 BEARING BUSH ASSEMBLY BC-2 SI BC-21.00
0004 L361.10-6815.0/3 BEARING BUSH ASSEMBLY BC-2 SII BC-21.00
0005 L361.10-4175.1/4 SUPPORT BC-21.00
L361.10-4175.1/4 SUPPORT BC-31.00
0006 L361.10-4396.1/4 HOLDER BC-11.00
0007 L361.10-4398.1/4 LOCATING PIECE BC-11.00
0008 L361.10-4397.1/4 HOLDER BC-11.00
0009 L560.01-1014.1/4 BEARING COVER BC-11.00
0010 L361.10-4167.1/4 OIL THROWER RING2.00
0012 L361.10-4168.1/4 RING BC-12.00
0013 L361.10-4643.1/3 FLANGE BUSH BC-11.00
0014 L361.10-4642.1/3 FLANGE BUSH BC-21.00
L361.10-4642.1/3 FLANGE BUSH BC-31.00
0015 L361.10-4535.1/4 RING BC-22.00
L361.10-4535.1/4 RING BC-32.00
0016 L361.10-4641.1/3 FLANGE COVER BC-21.00
L361.10-4641.1/3 FLANGE COVER BC-31.00
0018 L361.10-6817.0/3 BEARING BUSH ASSEMBLY BC-3 SI BC-31.00
0019 L361.10-6819.0/3 BEARING BUSH ASSEMBLY BC-3 SII BC-31.00
0021 L361.10-4278.1/3 HINGE PIECE BC-22.00
0022 L361.10-4279.1/3 HINGE PIECE BC-31.00
1 2/

17. L361.10-6822.0/1 BEARING BUSH ASSY.BC-1(HMT/FAG BC-1
L361.10-6824.0/1 BEARING BUSH ASSY.BC-2(HMT/FAG BC-2
L361.10-6825.0/1 BEARING BUSH ASSY.BC-3(HMT/FAG BC-3
01-04
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0023 NS048/002 WASHER 12.2X15.4X1.51.00
0024 NS147/006 SEALING BOLT M12X1.5X201.00
0025 L361.10-4280.1/3 HINGE PIECE BC-31.00
0026 L361.10-4557.1/4 PIN BC-22.00
L361.10-4557.1/4 PIN BC-34.00
0028 NS077/051 FITTING WASHER 17X24X1 BC-24.00
NS077/051 FITTING WASHER 17X24X1 BC-34.00
0030 L361.10-4282.1/4 PIN BC-22.00
L361.10-4282.1/4 PIN BC-32.00
0031 NS134/001 SOC.SET SCR.(CUP PT) M8X10 BC-22.00
NS134/001 SOC.SET SCR.(CUP PT) M8X10 BC-32.00
0033 NS033/034 HEX. HEAD SCR. M8X35 -10.9 BC-24.00
NS033/034 HEX. HEAD SCR. M8X35 -10.9 BC-34.00
0034 NS029/031 SOC. HD. CAP SCREW M8X168.00
0039 NS033/018 HEX. HEAD SCR. M10x35 -10.9 BC-14.00
0040 L361.10-4137.0/4 TAPER ROLLER BEARING ASSEMBLY2.00
0041 NS029/015 SOC. HD. CAP SCREW M12X35 BC-24.00
NS029/015 SOC. HD. CAP SCREW M12X35 BC-34.00
2 2/

21. !
%
! " "
! " "
" "
# ! "
" # $
#
#

23. !
& '
! " "
! " "
" "
(
" # "
& '
%
# ! "
#) " "

25. %
# ! "
!
& '
# ! "
& ' "
" # "
& '
%
! " "
! " "
" "

27. !
! " "
! " "
" "
# ! $
" # "
%
# ! "
& ' "

29. %
# ! "
!
# ! "
& ' "
" # "
%
! " "
! " "
" "

31. %% %
%% %
%% %
%% %
%% %
%% %
%
#
" "
( !
&
(
#) (
#) ( %
#) (
#) ( %
%
%
#) %
#) & ' %
& ' %

32. %% %
%% %
%% %
%% %
%% %
%% %
%
%
%
%
%
%
%
" "
% %
%
" # "
" # "
& ' "
% ! " "
!
# ! $
# ! "
!
# ! "
# # "
#) ( & '

33. %% %
%% %
%% %
%% %
%% %
%% %
#) ( & '
# # * +
( (
( (
# " & ,
% -
% %
%
# & " ' % .

36. L560.02-8780.0/2 LATERAL REGISTRATION ASSLY.
L560.02-8781.0/2 LATERAL REGISTRATION ASSLY
20-10
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L560.02-5147.1/4 SPINDLE1.00
0002 NS321/002 ANG CON D.R.BRG 3206 BTVH-ZZ1.00
0003 NS333/064 BEARING SPACER 30X40X51.00
0004 NS087/003 CHECK NUT M30X1.52.00
0005 NS333/007 BEARING SPACER 8X25X34.00
0006 NS029/006 SOC. HD.CAP SCREW M8X2013.00
0007 NS075/028 FEATHER KEY A 8X7X201.00
0008 L560.02-5155.1/3 SPUR GEAR1.00
0009 NS135/017 SOC.SET SCR.(CONE PT) M6X121.00
0011 L560.02-8764.1/3 REGISTER PLATE1.00
NS333/056 BEARING SPACER 28X40X32.00
0012 L560.02-5146.1/4 BUSH1.00
0013 NS029/027 SOC. HD. CAP SCREW M6X304.00
0014 L560.02-5156.1/4 BUSH1.00
0015 L560.02-6159.1/4 CAP1.00
0016 NS073/007 SPRING WASHER BM 81.00
0017 NS033/012 HEX. HEAD SCR. M8X20 -10.92.00
0018 NS033/049 HEX. HEAD SCR. M5X16 -10.92.00
0019 L560.01-6116.1/3 PLANETARY GEAR BOX (160121/01)1.00
0021 NS333/056 BEARING SPACER 28X40X32.00
0024 NS029/002 SOC. HD CAP SCREW M6x206.00
0025 NS275/048 FLAT WASHER 8.4X36X51.00
0027 NS075/055 FEATHER KEY A 5X5X201.00
1 2/

37. L560.02-8780.0/2 LATERAL REGISTRATION ASSLY.
L560.02-8781.0/2 LATERAL REGISTRATION ASSLY
20-10
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0028 NE035/350 SRIJAN, AC SYNC. MOTOR,SYN11011.00
0030 NS075/076 FEATHER KEY A 5X5X161.00
0031 L560.01-6880.1/4 HAND WHEEL1.00
0032 NS029/050 SOC. HD. CAP SCREW M6X103.00
0033 L560.02-5963.1/4 PLATE1.00
0036 L560.02-8771.1/3 SPUR GEAR1.00
0037 NS019/005 CIRCLIP FOR SHAFT 161.00
0039 Z660.47-2.30:4 NUT1.00
0040 L560.02-4139.1/4 BOLT4.00
0041 L560.02-8765.1/3 REGISTER PLATE1.00
0042 L560.01-2108.1/3 FLANGE BUSH1.00
0044 L560.02-11085.1/4 SPACER1.00
0045 L560.02-9421.1/3 SPUR GEAR1.00
0046 L100-10093.1/4 ANGLE1.00
0047 L100-10076.1/4 HOLDER1.00
0048 NS008/001 CHAMFERED WASHER 4.3X9X12.00
0049 NS033/140 HEXAGON HEADED SCREW M4X62.00
2 2/

40. L560.02-13022.0/2 CIRCUMFERENCIAL REGI.ASLY.(PC2 BOTTOM LEFT
L560.02-4201.0/2 CIRCUMFERENTIAL REGIST.ASSLY. BOTTOM RIGHT
L560.02-5189.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER RIGHT
L560.02-5190.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER LEFT
20-11/1
GROUP
REV - 011 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L100-3521.1/3 BEARING BUSH1.00
0002 NS800.347.001 D.ROW ANG.CON.B.BRG SKF-3205A1.00
0003 L100-3534.1/4 RING1.00
0004 NS271/008 BUTTON HD CAP SCREW AM6X104.00
0005 L560.02-4145.1/3 SPINDLE1.00
0006 NS075/083 FEATHER KEY A 8X7X181.00
0007 L560.02-4147.1/3 SPUR GEAR1.00
0008 NS019/007 CIRCLIP FOR SHAFT 251.00
0012 L560.02-13024.1/3 CROSS YOKE SII1.00
L560.02-4140.1/3 CROSS YOKE SII1.00
0013 L560.02-4141.1/3 GUIDE BUSH BOTTOM RIGHT1.00
L560.02-4141.1/3 GUIDE BUSH UPPER RIGHT1.00
L560.02-4142.1/3 GUIDE BUSH BOTTOM LEFT1.00
L560.02-4142.1/3 GUIDE BUSH UPPER LEFT1.00
0015 NS029/009 SOCKET HD CAP SCREW M8X353.00
0018 NS033/012 HEX. HEAD SCR. M8X20 -10.93.00
0019 NS034/008 HEXAGONAL NUT M16X21.00
0020 NS008/007 CHAMFERED WASHER 17x30x31.00
0021 L560.02-4146.1/3 SPUR GEAR1.00
0024 L560.02-4149.1/4 STAY BOLT2.00
0025 NS073/027 SPRING WASHER AM 103.00
0026 NS029/048 SOC. HD. CAP SCREW M10X403.00
1 3/

41. L560.02-13022.0/2 CIRCUMFERENCIAL REGI.ASLY.(PC2 BOTTOM LEFT
L560.02-4201.0/2 CIRCUMFERENTIAL REGIST.ASSLY. BOTTOM RIGHT
L560.02-5189.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER RIGHT
L560.02-5190.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER LEFT
20-11/1
GROUP
REV - 011 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0027 NS019/006 CIRCLIP FOR SHAFT 203.00
0028 NS059/011 SINGLE ROW BALL BRG 60042.00
0029 NS020/018 CIRCLIP FOR BORE 423.00
0030 L560.02-5186.1/4 BUSH1.00
0031 L560.02-5185.1/4 PIN1.00
0037 NS059/077 SINGLE ROW BALL BRG 60032.00
0038 NS020/011 CIRCLIP FOR BORE 352.00
0039 NS029/027 SOC. HD. CAP SCREW M6X302.00
0040 L560.02-4987.1/4 BRACKET1.00
0041 NS019/015 CIRCLIP FOR SHAFT 171.00
0042 L560.02-5187.1/3 WORM1.00
0044 L560.02-5180.0/4 UNIVERSAL JOINT2.00
0045 L560.02-14708.1/4 SHAFT1.00
L560.02-5181.1/4 SHAFT BOTTOM RIGHT1.00
L560.02-5182.1/4 SHAFT UPPER RIGHT1.00
L560.02-5184.1/4 SHAFT UPPER LEFT1.00
0047 L560.02-4986.1/4 BUSH1.00
0048 NS029/002 SOC. HD CAP SCREW M6x2018.00
0050 NS059/065 SINGLE ROW BALL BRG 6004 ZZ2.00
0051 L560.02-5166.1/4 SHAFT1.00
0052 L560.02-4988.1/4 WORM1.00
0053 NS001/008 TAPER PIN 4X401.00
2 3/

42. L560.02-13022.0/2 CIRCUMFERENCIAL REGI.ASLY.(PC2 BOTTOM LEFT
L560.02-4201.0/2 CIRCUMFERENTIAL REGIST.ASSLY. BOTTOM RIGHT
L560.02-5189.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER RIGHT
L560.02-5190.0/2 CIRCUMFERENTIAL REGIST.ASSLY. UPPER LEFT
20-11/1
GROUP
REV - 011 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0055 L351.69-0016.1/4 STAY BOLT4.00
0057 NE035/350 SRIJAN, AC SYNC. MOTOR,SYN11011.00
0058 L560.02-4989.1/4 WORM WHEEL1.00
0059 L560.02-5165.1/4 PLATE1.00
0060 Z660.47-2.30:4 NUT1.00
0061 NS019/003 CIRCLIP FOR SHAFT 121.00
0065 NS082/046 OIL SEAL A 20x35x71.00
0068 NS134/017 SOC.SET SCR.(CUP PT) M5X122.00
0069 NS001/035 TAPER PIN 4X161.00
0070 NS075/050 FEATHER KEY A 6X6X162.00
0071 L560.02-4135.1/3 WORM WHEEL1.00
0072 NS276A/019 SPRING DOWEL PIN 5X284.00
0073 L560.01-6880.1/4 HAND WHEEL1.00
0074 L100-9898.1/4 STUD BOTTOM LEFT2.00
0075 L560.02-6878.0/4 FLEXIBLE CLAW COUPLING1.00
0076 L100-10076.1/4 HOLDER1.00
0077 L100-10078.1/4 ANGLE1.00
0078 NS008/001 CHAMFERED WASHER 4.3X9X12.00
0079 NS008/003 CHAMFERED WASHER 6.4x12x1.52.00
0080 NS029/050 SOC. HD. CAP SCREW M6X102.00
0081 NS033/140 HEXAGON HEADED SCREW M4X62.00
3 3/

44. L361.10-4836.0/9 BLANKET CYLINDER GEAR BC-1 IR/YR 546 BC1
L361.10-4837.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 546 BC2,3
L361.10-5261.0/9 BLANKET CYL.GEAR ASSLY.BC-1 IR/YR 560 BC1
L361.10-5262.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 560 BC2,3
L533.02-5049.0/0 BLANKET CYLINDER GEAR BC-1 IR/YR 533 BC1
L533.02-5050.0/0 BLANKET CYLINDER GEAR BC-2/BC3 IR/YR 533 BC2,3
L546.02-8051.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 546 BC1
L560.02-8049.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 560 BC1
L578.02-8619.0/3 BLANKET CYL.GEAR ASSY (BC1) 4HI 578 BC1 BOT
L578.02-8642.0/3 BLANKET CYL.GEAR ASSY.BC1 578 4HI 578 BC1 UPP
L915.33-1828.0/3 BLANKET CYL.GEAR ASSEMBLY BC-1 IR/YR 578 BC1
L915.33-1829.0/3 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 578 BC2,3
01-65
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L361.10-4201.1/3 CLAMPING BOSS1.00
0002 L361.10-4374.1/4 RING1.00
0003 L361.10-4831.1/3 HELICAL GEAR IR/YR 546 BC11.00
L361.10-5265.1/3 HELICAL GEAR IR/YR 560 BC11.00
L533.02-5018.1/2 HELICAL GEAR IR/YR 533 BC11.00
L546.02-8044.1/3 HELICAL GEAR 4HI 546 BC11.00
L560.02-8043.1/3 HELICAL GEAR 4HI 560 BC11.00
L578.02-8620.1/3 HELICAL GEAR BC1 4HI 578 BC1 UPP1.00
L915.33-1813.1/2 HELICAL GEAR 4HI 578 BC1 BOT1.00
L915.33-1813.1/2 HELICAL GEAR IR/YR 578 BC11.00
0004 NS029/015 SOC. HD. CAP SCREW M12X356.00
0005 NS029/016 SOC. HD. CAP SCREW M12X404.00
0006 NS029/021 SOC. HD. CAP SCREW M16x502.00
0007 NS073/009 SPRING WASHER BM 124.00
NS073/028 SPRING WASHER AM 1210.00
1 2/

45. L361.10-4836.0/9 BLANKET CYLINDER GEAR BC-1 IR/YR 546 BC1
L361.10-4837.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 546 BC2,3
L361.10-5261.0/9 BLANKET CYL.GEAR ASSLY.BC-1 IR/YR 560 BC1
L361.10-5262.0/9 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 560 BC2,3
L533.02-5049.0/0 BLANKET CYLINDER GEAR BC-1 IR/YR 533 BC1
L533.02-5050.0/0 BLANKET CYLINDER GEAR BC-2/BC3 IR/YR 533 BC2,3
L546.02-8051.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 546 BC1
L560.02-8049.0/9 BLANKET CYL.GEAR BC-1 BOT.STK. 4HI 560 BC1
L578.02-8619.0/3 BLANKET CYL.GEAR ASSY (BC1) 4HI 578 BC1 BOT
L578.02-8642.0/3 BLANKET CYL.GEAR ASSY.BC1 578 4HI 578 BC1 UPP
L915.33-1828.0/3 BLANKET CYL.GEAR ASSEMBLY BC-1 IR/YR 578 BC1
L915.33-1829.0/3 BLANKET CYL.GEAR ASSY.BC-2/BC3 IR/YR 578 BC2,3
01-65
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0008 NS073/029 SPRING WASHER AM 162.00
0009 L361.10-4832.1/3 HELICAL GEAR IR/YR 546 BC2,31.00
L361.10-5266.1/3 HELICAL GEAR IR/YR 560 BC2,31.00
L533.02-5019.1/2 HELICAL GEAR IR/YR 533 BC2,31.00
L915.33-1814.1/2 HELICAL GEAR IR/YR 578 BC2,31.00
0010 L361.10-5831.1/4 RING1.00
0011 NS033/041 HEX. HEAD SCR. M12X50 -10.94.00
2 2/

47. L533.02-5051.0/0 PLATE CYLINDER GEAR PC-1 FOR 533 PC-1
L533.02-5052.0/0 PIATE CYLINDER GEAR PC-2/PC-3 FOR 533 PC-2,3
L915.31-1307.0/9 PLATE CYL.GEAR ASSLY.PC-1 FOR 546 PC-1
L915.31-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 546 PC-2,3
L915.32-1307.0/9 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 560 PC-1
L915.32-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 560 PC-2,3
L915.33-1825.0/3 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 578 PC-1
L915.33-1826.0/3 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 578 PC-2,3
01-66
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0012 L361.10-4404.1/4 RING1.00
0013 L361.10-4833.1/3 SPUR GEAR FOR 546 PC-11.00
L361.10-4833.1/3 SPUR GEAR FOR 546 PC-2,31.00
L361.10-5267.1/3 SPUR GEAR FOR 560 PC-11.00
L361.10-5267.1/3 SPUR GEAR FOR 560 PC-2,31.00
L533.02-5020.1/2 SPUR GEAR FOR 533 PC-11.00
L533.02-5020.1/2 SPUR GEAR FOR 533 PC-2,31.00
L915.33-1812.1/3 SPUR GEAR FOR 578 PC-11.00
L915.33-1812.1/3 SPUR GEAR FOR 578 PC-2,31.00
0014 L361.10-4389.1/4 SLIDING PIN3.00
L361.10-4389.1/4 SLIDING PIN3.00*
0015 L361.10-4915.1/3 WHEEL BODY ASSEMBLY1.00
L361.10-4915.1/3 WHEEL BODY ASSEMBLY1.00*
0016 L915.32-1247.1/3 BUSH1.00
L915.32-1247.1/3 BUSH1.00*
0017 NS029/026 SOC. HD. CAP SCREW M6X163.00
NS029/026 SOC. HD. CAP SCREW M6X163.00*
0018 L361.10-4751.1/4 HELICAL GEAR FOR 560 PC-11.00
L361.10-4752.1/4 HELICAL GEAR FOR 560 PC-2,31.00
1 2/

48. L533.02-5051.0/0 PLATE CYLINDER GEAR PC-1 FOR 533 PC-1
L533.02-5052.0/0 PIATE CYLINDER GEAR PC-2/PC-3 FOR 533 PC-2,3
L915.31-1307.0/9 PLATE CYL.GEAR ASSLY.PC-1 FOR 546 PC-1
L915.31-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 546 PC-2,3
L915.32-1307.0/9 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 560 PC-1
L915.32-1308.0/9 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 560 PC-2,3
L915.33-1825.0/3 PLATE CYL.GEAR ASSEMBLY PC-1 FOR 578 PC-1
L915.33-1826.0/3 PLATE CYL.GEAR ASSLY.PC-2/PC-3 FOR 578 PC-2,3
01-66
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0018 L361.10-4829.1/4 HELICAL GEAR FOR 546 PC-11.00
L361.10-4830.1/4 HELICAL GEAR FOR 546 PC-2,31.00
L533.02-5014.1/3 HELICAL GEAR FOR 533 PC-2,31.00*
L533.02-5016.1/3 HELICAL GEAR FOR 533 PC-11.00*
L915.33-1815.1/3 HELICAL GEAR FOR 578 PC-2,31.00
L915.33-1816.1/3 HELICAL GEAR FOR 578 PC-11.00
0019 NS029/006 SOC. HD.CAP SCREW M8X206.00
0020 NS073/026 SPRING WASHER AM 86.00
"*" - TO BE ORDERED JOINTLY UNDER DRG.NO.= L533.02-5015.0/2 FOR 533 PC-2,3
"*" - TO BE ORDERED JOINTLY UNDER DRG.NO.= L533.02-5017.0/2 FOR 533 PC-1
* MARK NUMBERS ARE ORDERED WITH L915.32-1640.1/4 FOR 560 PC-1
2 2/

50. ( # #
" & ( # '
% ( " "
& ' "
% ( " "
" # "
# # ( & '

53. #
%
! //
" "
% %
% ( " "
% ( " "
" & # '
# # ( & '
" # "
& ' "
"

55. # & # ' %
# & # ' %
# & # ' %
# % -
# % -
# % -
%
%
&/ ' % -
&/ ' %
% -
%
!
" "
# ! "
" # "
% ! " "
%
" # "
% %
%
% %
% ! " "

57. L361.20-8433.0/3 INTERMEDIATE GEAR ASSEMBLY
01-28
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L361.20-8430.1/4 INTERMEDIATE BOLT1.00
0002 L361.20-8476.1/4 SPUR GEAR1.00
0003 NS059/007 SINGLE ROW BALL BRG 60062.00
0004 NS333/061 BEARING SPACER 30X36X201.00
0005 NS275/048 FLAT WASHER 8.4X36X51.00
0006 NS033/012 HEX. HEAD SCR. M8X20 -10.91.00
0007 NS020/027 CIRCLIP FOR BORE 552.00
0008 NS019/011 CIRCLIP FOR SHAFT 301.00
1 1/

59. L361.20-7306.0/2 RECIPRO.ROLLER DRIVE ASSEMBLY
01-29
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 NS059/015 SINGLE ROW BALL BRG 60014.00
0002 L361.20-1960.1/4 CONNECTING ROD1.00
0003 L361.20-1865.1/4 STUD1.00
0004 L361.20-7308.1/4 PIN1.00
0006 NS059/099 SINGLE ROW BALL BRG 6302 C21.00
0007 L361.20-7307.1/3 ECCENTRIC SHAFT1.00
0008 L361.20-2857.1/3 WORM WHEEL1.00
0009 L361.20-3045.1/2 HOUSING1.00
0010 L361.21-1031.1/4 RING1.00
0011 NS059/011 SINGLE ROW BALL BRG 60041.00
0012 NS001/011 TAPER PIN 5X401.00
0013 NS059/102 SINGLE ROW BALL BRG 6305-C21.00
0014 NS034/007 HEXAGONAL NUT M12X1.751.00
0015 NS020/014 CIRCLIP FOR BORE 622.00
0016 NS019/006 CIRCLIP FOR SHAFT 201.00
0017 NS077/048 FITTING WASHER 12X18X0.22.00
0018 NS077/009 FITTING WASHER 12X18X0.51.00
0019 NS077/010 FITTING WASHER 12X18X15.00
0020 NS019/003 CIRCLIP FOR SHAFT 122.00
0021 NS077/053 FITTING WASHER 24X32X11.00
0022 NS001/072 TAPER PIN 4X301.00
0023 NS020/023 CIRCLIP FOR BORE 281.00
0024 NS020/018 CIRCLIP FOR BORE 422.00
1 2/

60. L361.20-7306.0/2 RECIPRO.ROLLER DRIVE ASSEMBLY
01-29
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0025 NS077/013 FITTING WASHER 15X22X12.00
0026 NS019/014 CIRCLIP FOR SHAFT 151.00
0027 NS029/027 SOC. HD. CAP SCREW M6X302.00
0028 NS073/025 SPRING WASHER AM 62.00
0029 NS275/066 FLAT WASHER 13X30X41.00
2 2/

62. / # %
" # "
% %
0
"
% ( " "
% & '
% ( " "
## (
% %
(
# "
# ! "
!
!
" "
" "
( ! & 11'

63. / # %
( "
" # "
" "
" "
" "
" "
( &
( # ! "
%
" "
!
" "

65. # #
%
"
!
" "
( ! & 11'
( "
" "
" # "
" "
(
% ( " "

67. L560.02-9156.0/1 HAND DRIVE ASSEMBLY PRINT UNIT
L560.02-9160.0/1 HAND DRIVE ASSEMBLY HILINE TOWER
01-59/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L560.01-3357.1/4 BEARING BUSH PRINT UNIT1.00
NS368/003 PHOSP. BRONZE BUSH 20X26X20 HILINE TOWER2.00
0002 L560.02-9157.1/3 COVER1.00
0003 NS029/003 SOC. HD CAP SCREW M6x254.00
0004 L361.50-6108.1/4 SWITCH PLATE1.00
0005 NS008/001 CHAMFERED WASHER 4.3X9X14.00
0006 NS003/007 SLT.CH.HD.SCREW M4X102.00
0007 NE006/020 LIMIT SWITCH XCKP2121G111.00
0008 NS003/038 SLT.CH.HD.SCREW M4X302.00
0009 L560.01-9158.1/4 DRIVING PIN1.00
0010 NS071/004 OIL RING 12X21.00
0011 L361.50-6107.1/4 COVER PLATE1.00
0012 NS017/004 KNURLED SCREW M8X161.00
0013 NS275/043 FLAT WASHER 6.4X18X1.52.00
0014 NS073/005 SPRING WASHER BM 63.00
0015 NS033/001 HEX. HEAD SCR. M6X10 -10.92.00
0016 L560.02-9159.1/4 OIL COVER1.00
0017 NS004/007 SLT.PAN HD.SCREW M6X101.00
0018 L560.02-4495.1/4 RING1.00
0019 L560.02-4493.1/4 GASKET1.00
1 1/

69. L560.02-7894.0/9 TIMING BELT PULLEY ASSEMBLY
20-21/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L100-4275.1/4 BLOCK1.00
0002 L560.02-9448.1/3 TIMING BELT PULLEY 14MX-30S-371.00
0003 L560.02-9449.1/4 SHAFT1.00
0004 L915.32-4022.1/3 BRACKET1.00
0005 NS019/018 CIRCLIP FOR SHAFT 401.00
0006 NS020/012 CIRCLIP FOR BORE 802.00
0007 NS029/011 SOC. HD. CAP SCREW M10X252.00
0008 NS029/048 SOC. HD. CAP SCREW M10X404.00
0009 NS033/041 HEX. HEAD SCR. M12X50 -10.91.00
0010 NS034/010 HEXAGONAL NUT M24X32.00
0011 NS059/069 SINGLE ROW BALL BRG 6208 ZZ2.00
0012 NS073/027 SPRING WASHER AM 106.00
0013 NS001/008 TAPER PIN 4X403.00
0014 NS326/013 TIMING BELT 2660-14M-37 GATES1.00
1 1/

71. L560.43-10023.0/9 MAIN MOTOR ASLY.56KW BAU.HL-45 FOR 56 KW BAU.
L560.43-11587.0/9 MAIN MOTOR 56KW CROM.WITH STAND FOR 56KW
L560.43-11776.0/9 MAIN MOTOR 90KW KEC/COM HL-45 FOR 90KW
L560.43-12237.0/9 MOTOR 130KW CRO/KEC WITH STAND HL-45 FOR 130KW
L560.43-14171.0/9 MOTOR 93KW BAU.WITH STAND HL-45 FOR 93KW
L560.43-15254.0/9 MOTOR 130KW BAUM.WITH STAND HL-45 FOR 130KW BAUM.
20-23
GROUP
REV - 005 22/04/2007
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 NE007.036.012 MAIN MOTOR 56KW FOR 56KW1.00
NE007.036.086 GNA 160 SN-47BP BAU.56KW MOTOR FOR 56 KW BAU.1.00
NE007.036.091 GNA 160 LN-471R BAU.93KW MOTOR FOR 93KW1.00
NE035/300 130KW MOTOR GNA180LN S710 BAUM FOR 130KW BAUM.1.00
NE035/301 90 KW DC MOTOR FOR 90KW1.00
NE035/302 CGL, 130 KW (NL-45) FOR 130KW1.00
0007 NS034/008 HEXAGONAL NUT M16X212.00
0008 NS008/007 CHAMFERED WASHER 17x30x38.00
0009 L560.01-1171.1/4 MOTOR MOUNTING BLOCK4.00
L560.01-14990.1/4 MOTOR MOUNTING BLOCK4.00
L560.01-14991.1/4 MOTOR MOUNTING BLOCK4.00
0010 L560.03-12511.1/4 FENNER PULLEY PROD.NO.4C0335 FOR 130KW2.00
L560.03-12511.1/4 FENNER PULLEY PROD.NO.4C0335 FOR 90KW2.00
L560.03-15256.1/4 DRIVEN PULLEY 130KW (005C0335) FOR 130KW BAUM.1.00
L560.03-9208.1/4 MOT.PULLEY 90KW/1920(004C0280) FOR 93KW1.00
L560.03-9209.1/4 MOT.PULLEY 56KW/1500(004B0315) FOR 56 KW BAU.1.00
L560.03-9209.1/4 MOT.PULLEY 56KW/1500(004B0315) FOR 56KW2.00
0011 NS033/032 HEX. HEAD SCR. M8X16 -10.94.00
0012 NS033/002 HEX. HEAD SCR. M6X12 -10.910.00
0013 NS033/046 HEX. HEAD SCR. M16X100 -10.94.00
0014 L560.02-9356.0/1 MOTOR BEAM1.00
1 3/

72. L560.43-10023.0/9 MAIN MOTOR ASLY.56KW BAU.HL-45 FOR 56 KW BAU.
L560.43-11587.0/9 MAIN MOTOR 56KW CROM.WITH STAND FOR 56KW
L560.43-11776.0/9 MAIN MOTOR 90KW KEC/COM HL-45 FOR 90KW
L560.43-12237.0/9 MOTOR 130KW CRO/KEC WITH STAND HL-45 FOR 130KW
L560.43-14171.0/9 MOTOR 93KW BAU.WITH STAND HL-45 FOR 93KW
L560.43-15254.0/9 MOTOR 130KW BAUM.WITH STAND HL-45 FOR 130KW BAUM.
20-23
GROUP
REV - 005 22/04/2007
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0015 L100-2847.1/4 BLOCK4.00
0016 NS029/012 SOC. HD. CAP SCREW M10X608.00
0017 NS033/046 HEX. HEAD SCR. M16X100 -10.94.00
NS033/076 HEX. HEAD SCR. M16x60 -10.94.00
0018 L560.02-4267.0/2 MOTOR STAND1.00
0019 L100-2846.1/4 PLATE4.00
0020 NS033/060 HEX. HEAD SCR. M10X40 -10.98.00
0021 NS034/006 HEXAGONAL NUT M10X1.508.00
0022 NS008/005 CHAMFERED WASHER 10.5x20x216.00
0023 NS033/076 HEX. HEAD SCR. M16x60 -10.94.00
0024 L100-2403.1/4 LEVELING PAD10.00
0025 L361.70-4667.1/4 LEVELING BOLT6.00
R335.54-2.1:10 LEVELLING BOLT M166.00
R335.54-2.1:10 LEVELLING BOLT M16 FOR 56 KW BAU.6.00
0026 NS034/010 HEXAGONAL NUT M24X36.00
0027 L560.01-3600.1/4 FISHER BOLT (SHAKTI)6.00
0028 L560.02-4300.0/4 SUPPORT1.00
0030 L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800)10.00
L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800) FOR 130KW8.00
L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800) FOR 90KW8.00
L100-8689.1/9 VEE BELT SPC 2800 (22X18X2800) FOR 93KW8.00
2 3/

73. L560.43-10023.0/9 MAIN MOTOR ASLY.56KW BAU.HL-45 FOR 56 KW BAU.
L560.43-11587.0/9 MAIN MOTOR 56KW CROM.WITH STAND FOR 56KW
L560.43-11776.0/9 MAIN MOTOR 90KW KEC/COM HL-45 FOR 90KW
L560.43-12237.0/9 MOTOR 130KW CRO/KEC WITH STAND HL-45 FOR 130KW
L560.43-14171.0/9 MOTOR 93KW BAU.WITH STAND HL-45 FOR 93KW
L560.43-15254.0/9 MOTOR 130KW BAUM.WITH STAND HL-45 FOR 130KW BAUM.
20-23
GROUP
REV - 005 22/04/2007
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0030 NS072/028 VEE BELT SPB 2840 FENNER8.00
NS072/028 VEE BELT SPB 2840 FENNER FOR 56KW8.00
0032 L560.03-9187.1/4 TAPER LOCK BUSH f65 (3535R0)1.00
L560.03-9187.1/4 TAPER LOCK BUSH f65 (3535R0) FOR 130KW1.00
L560.03-9189.1/4 TAPER LOCK BUSH f60 (3020P0) FOR 56 KW BAU.1.00
L560.03-9201.1/4 TAPER LOCK BUSH f60 (3535R0) FOR 56KW1.00
L560.03-9201.1/4 TAPER LOCK BUSH f60 (3535R0) FOR 90KW1.00
L560.03-9201.1/4 TAPER LOCK BUSH f60 (3535R0) FOR 93KW1.00
0034 L560.03-9205.1/4 TAPER LOCK BUSH f50 (3535R0)1.00
0035 NE035/195 HUBNER TACHO GENERATOR1.00
0038 NS136/051 STUD A M12X1304.00
0039 NS008/014 CHAMFERED WASHER 12.5X21X28.00
0040 NS034/007 HEXAGONAL NUT M12X1.758.00
0041 NS073/009 SPRING WASHER BM 128.00
0042 L560.03-15255.1/4 MOT.PULLEY 130KW 1880(005C0265 FOR 130KW BAUM.1.00
L560.03-9191.1/4 MOT.PUL.56KW/1880 BAU(004B0250 FOR 56 KW BAU.1.00
L560.03-9207.1/4 MOT.PUL.90/130KW/1500(004C0355 FOR 93KW1.00
3 3/

75. L533.22-5955.0/1 FRICTION CYLINDER ASSEMBLY FOR 533 C/O
L546.22-5957.0/1 FRICTION CYLINDER ASSEMBLY FOR 546 C/O
L560.22-5959.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/O
L578.22-5961.0/1 FRICTION CYLINDER ASSEMBLY FOR 578 C/O
01-09/4
GROUP
REV - 001 8/29/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L533.22-12219.0/3 FRICTION CYLINDER FOR 533 C/O1.00
L546.22-12216.0/3 FRICTION CYLINDER (RIL) FOR 546 C/O1.00
L560.22-12218.0/3 FRICTION CYLINDER (RIL) FOR 560 C/O1.00
L578.22-12217.0/3 FRICTION CYLINDER (RIL) FOR 578 C/O1.00
0002 L915.32-1014.1/3 BEARING BUSH SI1.00
0003 L100-5244.1/3 BEARING BUSH SII1.00
0004 NS066/016 NEEDLE ROL.BRG NRB RNA 49072.00
0005 L361.20-7375.1/4 INNER RING2.00
0006 L361.21-0871.1/4 HOLDING PIECE2.00
0007 NS333/144 BEARING SPACER 36X45X161.00
0008 L361.20-8548.1/4 SPUR GEAR1.00
0010 NS059/027 SINGLE ROW BALL BRG 62061.00
0011 NS333/058 BEARING SPACER 28X40X251.00
0012 L361.20-2858.1/4 WORM1.00
0014 NS333/057 BEARING SPACER 28X40X101.00
0015 NS333/052 BEARING SPACER 25X36X161.00
0019 NS333/078 BEARING SPACER 45X54.8X32.00
0020 L361.20-7378.1/4 RING2.00
0023 NS020/027 CIRCLIP FOR BORE 553.00
0024 NS077/035 FITTING WASHER 45X55X12.00
0025 NS019/035 CIRCLIP FOR SHAFT 684.00
0028 NS021/018 SLOT.GR.SCR.-FLAT END M5X62.00
1 2/

76. L533.22-5955.0/1 FRICTION CYLINDER ASSEMBLY FOR 533 C/O
L546.22-5957.0/1 FRICTION CYLINDER ASSEMBLY FOR 546 C/O
L560.22-5959.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/O
L578.22-5961.0/1 FRICTION CYLINDER ASSEMBLY FOR 578 C/O
01-09/4
GROUP
REV - 001 8/29/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0029 NS075/069 FEATHER KEY A 10X8X251.00
0030 NS075/011 FEATHER KEY A 8X7X321.00
0033 NS029/026 SOC. HD. CAP SCREW M6X166.00
0034 L560.02-12225.1/4 END DISK1.00
0036 NS021/027 SLOT.GR.SCR.-FLAT END M5X121.00
0037 NS077/093 FITTING WASHER 69X 85X15.00
0038 NS033/020 HEX. HEAD SCR. M12X30 -10.91.00
0039 NS073/028 SPRING WASHER AM 121.00
0040 NS333/049 BEARING SPACER 25X36X51.00
0041 NS800.019.002 CIRCLIP 25X2H IS:3075 PART-I1.00
0042 NS800.333.002 BEARING SPACER 36X45X141.00
2 2/

78. L915.32-1030.0/3 INK ROLLER ASSEMBLY IF90.5 FOR IF 90.5
L915.32-1032.0/3 INK ROLLER ASSEMBLY IF84.5 FOR IF 84.5
L915.32-1061.0/3 INK ROLLER ASSEMBLY R 64 FOR R 64
L915.32-1881.0/3 FORM ROLLER ASSLY.DF90.5 FOR DF 90.5
L915.32-4483.0/3 FORM ROLLER ASSEMBLY DF100 DF 100
01-10
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 NS059/132 SINGLE ROW BALL BRG 6304-2RS2.00
0002 NS019/006 CIRCLIP FOR SHAFT 202.00
0003 L915.32-1062.0/3 COMPL.RUBBER ROLLER FOR R 641.00
L915.32-1571.0/3 COMPL.RUBBER ROLLER ASSEMBLY FOR IF 84.51.00
L915.32-1572.0/3 COMPL.RUBBER ROLLER ASSEMBLY FOR IF 90.51.00
L915.32-1878.0/3 DAMP.FORME ROLLER D.F.90.5 FOR DF 90.51.00#
L915.32-4476.0/3 DAMP.FORME ROLLER D.F.100 DF 1001.00*
"#" =CONSINDER IN PRINT UNIT DAMPENING SYSTEM. FOR DF 90.5
"*" = CONSINDER IN 4HI TOWER DAMPENING SYSTEM. DF 100
1 1/

80. L560.22-13892.0/2 SCORING ROLLER ASSEMBLY UPPER UPPER
L560.22-13894.0/2 SCORING ROLLER ASSEMBLY BOTTOM BOTTOM
20-27/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L560.02-13859.1/3 ECCENTRIC BUSH2.00
0002 L560.22-13858.2/3 SCORING ROLLER (915 W.W.)1.00
0003 NS016/033 FLT HEX NUT M16X24.00
0004 NS019/008 CIRCLIP FOR SHAFT 452.00
0005 NS020/001 CIRCLIP FOR BORE 852.00
0006 NS029/032 SOC. HD. CAP SCREW M8X404.00
0007 NS033/042 HEX. HEAD SCR. M12X60 -10.9 UPPER4.00
NS033/137 HEX.HEAD.SCREW M12X70 BOTTOM4.00
0008 NS034/007 HEXAGONAL NUT M12X1.754.00
0009 NS059/153 SINGL ROW BALL BRG 6209 2RS P52.00
0010 W06.04610-2505 LENS FLANGE BOLT*MRR*22152.00
0011 L560.02-20148.1/4 STOPPER BOTTOM2.00
W16.03431-0096 SUPPORT UPPER2.00
0012 W16.03494-0010 STOPPER4.00
1 1/

82. L560.22-11778.0/9 INK DUCT ROL.ASSY.BOT.(NEW RE) BOTTOM
L560.22-11779.0/9 INK DUCT ROL.ASSY.UPP.(NEW RE) UPPER
L560.22-7911.0/9 INK DUCT ROLLER ASSLY.UPPER UPPER
L560.22-7912.0/9 INK DUCT ROLLER ASSLY.BOTTOM BOTTOM
20-28
GROUP
REV - 001 7/4/2005
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 NS059/079 SINGLE ROW BALL BRG 6007 P622.00
0002 L361.20-7163.1/4 SPACER1.00
0003 L100-5950.0/3 INK DUCT ROLLER ASSLY. UPPER1.00
L100-5951.0/3 INK DUCT ROLLER ASSLY. BOTTOM1.00
L560.22-11757.0/3 INK DUCT ROLLER ASSLY. UPPER1.00
L560.22-11758.0/3 INK DUCT ROLLER ASSLY. BOTTOM1.00
0004 NS082/055 OIL SEAL A 42X62X71.00
0005 NS020/014 CIRCLIP FOR BORE 622.00
0006 NS333/104 BEARING SPACER 35.3X44.8X51.00
0007 NS019/025 CIRCLIP FOR SHAFT 352.00
0008 NS333/084 BEARING SPACER 55X62X32.00
1 1/

85. L533.22-5954.0/1 FRICTION CYLINDER ASSEMBLY FOR 533 C/O
L546.22-5956.0/1 FRICTION CYLINDER ASSEMBLY FOR 546 C/O
L560.22-5958.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/O
L578.22-5960.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/O
01-19/1
GROUP
OIL SEALLESS
REV - 001 8/29/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0002 L361.20-8792.1/3 BEARING BUSH SI1.00
0003 L100-5238.1/3 BEARING BUSH SII1.00
0004 NS066/016 NEEDLE ROL.BRG NRB RNA 49072.00
0005 L361.20-7375.1/4 INNER RING2.00
0006 L361.21-0871.1/4 HOLDING PIECE2.00
0007 NS333/144 BEARING SPACER 36X45X161.00
0008 L361.20-8548.1/4 SPUR GEAR1.00
0010 NS059/027 SINGLE ROW BALL BRG 62061.00
0011 NS333/058 BEARING SPACER 28X40X251.00
0012 L361.20-2858.1/4 WORM1.00
0013 NS333/057 BEARING SPACER 28X40X101.00
0014 NS333/052 BEARING SPACER 25X36X161.00
0019 NS333/078 BEARING SPACER 45X54.8X32.00
0020 L361.20-7378.1/4 RING2.00
0023 NS020/027 CIRCLIP FOR BORE 553.00
0024 NS077/035 FITTING WASHER 45X55X12.00
0025 NS019/035 CIRCLIP FOR SHAFT 682.00
0028 NS021/018 SLOT.GR.SCR.-FLAT END M5X62.00
0029 NS075/069 FEATHER KEY A 10X8X251.00
0030 NS075/011 FEATHER KEY A 8X7X321.00
0033 NS029/026 SOC. HD. CAP SCREW M6X164.00
0036 L533.22-12223.0/3 FRICTION CYLINDER (DAMP.) FOR 533 C/O1.00
1 2/

86. L533.22-5954.0/1 FRICTION CYLINDER ASSEMBLY FOR 533 C/O
L546.22-5956.0/1 FRICTION CYLINDER ASSEMBLY FOR 546 C/O
L560.22-5958.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/O
L578.22-5960.0/1 FRICTION CYLINDER ASSEMBLY FOR 560 C/O
01-19/1
GROUP
OIL SEALLESS
REV - 001 8/29/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0036 L546.22-12222.0/3 FRICTION CYLINDER (DAMP.) FOR 546 C/O1.00
L560.22-12224.0/3 FRICTION CYLINDER (DAMP.) FOR 560 C/O1.00
L578.22-12221.0/3 FRICTION CYLINDER (DAMP.) FOR 560 C/O1.00
0037 L560.02-12225.1/4 END DISK1.00
0038 NS033/020 HEX. HEAD SCR. M12X30 -10.91.00
0039 NS073/028 SPRING WASHER AM 121.00
0040 NS800.333.002 BEARING SPACER 36X45X141.00
0041 NS333/049 BEARING SPACER 25X36X51.00
0042 NS800.019.002 CIRCLIP 25X2H IS:3075 PART-I1.00
2 2/

88. ( # & '
# ( #
%
( #
%
! "
#)
!
!
#
#
#

89. ( # & '
#
( #
# "
"
% " "
& ' "
!
#) " "
# ! $
( # ! "
# ! "
# ! "
# ! "
" # "
" "
" "
! " "
# (

90. ( # & '
# (
( #
& ' "
( # ! "
( # ! "
( #

92. L546.22-12149.0/9 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 546 C/O
L560.02-4066.0/1 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 560 C/O
L578.22-8609.0/1 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 578 C/O
20-31
GROUP
REV - 004 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L915.32-1246.1/4 SHAFT1.00
0002 L560.02-16323.1/4 ECCENTRIC BUSH2.00
0003 NS001/017 TAPER PIN 6X455.00
0004 L560.02-16324.1/4 LEVER4.00
0005 NS016/023 FLT HEX NUT M10X14.00
0006 L560.01-3580.1/4 STUD (76)2.00
0008 NS143/069 SINTERED BUSH 25X32X164.00
0010 NS029/026 SOC. HD. CAP SCREW M6X1613.00
0012 NS019/014 CIRCLIP FOR SHAFT 154.00
0013 U850A2594.1/4 LEVER4.00
0014 L915.32-1242.1/4 PIN2.00
0015 L560.02-4057.1/3 LEVER SII1.00
0016 NS019/007 CIRCLIP FOR SHAFT 2512.00
0017 L915.32-1861.1/4 ADJUSTING SPUR GEAR12.00
0018 U850A2581.1/4 LOCK RING8.00
0019 U850A2580.1/3 ECCENTRIC PIN8.00
0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00
0021 NS079/003 STEEL BALL 6MM12.00
0022 L560.02-4056.1/3 LEVER SI1.00
0023 T915B2424.1/3 ECCNTRIC PIN4.00
0024 T915B2423.1/4 LOCK RING4.00
0025 L915.32-1076.1/2 LEVER SII FW2,FW31.00
0026 L915.32-1077.1/2 LEVER SI FW2,FW31.00
1 3/

93. L546.22-12149.0/9 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 546 C/O
L560.02-4066.0/1 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 560 C/O
L578.22-8609.0/1 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 578 C/O
20-31
GROUP
REV - 004 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0027 L915.32-4004.1/2 LEVER1.00
0028 L915.32-4149.1/3 LEVER1.00
0029 L915.32-4150.1/3 LEVER1.00
0030 L915.32-4005.1/2 LEVER1.00
0035 T915B2521.1/4 BRACKET2.00
0036 NS034/005 HEXAGONAL NUT M8X1.258.00
0038 L915.32-4016.1/2 LEVER1.00
0039 L361.30-2997.0/4 PNEUMATIC CYLINDER ASSEMBLY4.00
0043 L361.20-8827.1/4 STOPPER4.00
0044 L361.20-7410.1/4 HEXAGONAL BOLT4.00
0045 L361.20-7409.1/4 PIN4.00
0046 NS085/058 HELI.TEN.SPRING A2.5X18X106.00
0047 NS094/006 SPRING SCREW M6X284.00
0048 L915.32-4015.1/2 LEVER1.00
0049 NS041/017 SOC. GROOVED PIN 5X2012.00
0054 L915.32-1724.1/4 PIN1.00
0055 NS333/005 BEARING SPACER 8X16X41.00
0057 NS019/003 CIRCLIP FOR SHAFT 121.00
0058 L560.02-13502.1/4 STUD (100) FOR 560 C/O2.00
L560.02-8650.1/4 STUD (108) FOR 546 C/O2.00
NS357/004 STUD M10X1XM10 LHX1X96 FOR 578 C/O2.00
0061 NS005/018 SPLIT CUTTER PIN 1.6X141.00
0063 NS073/007 SPRING WASHER BM 812.00
2 3/

94. L546.22-12149.0/9 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 546 C/O
L560.02-4066.0/1 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 560 C/O
L578.22-8609.0/1 ROLLER BRACKET ASSY.FW1 BOTTOM FOR 578 C/O
20-31
GROUP
REV - 004 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0066 NS333/009 BEARING SPACER 9X16X126.00
0068 NS023/003 HEX BOLT WITH STEP M6X2012.00
0073 L361.20-7399.1/4 RING2.00
0075 NS016/034 FLT HEX NUT M10X1 L.H.4.00
0076 NS033/088 HEX. HEAD SCR. M8X60 -10.94.00
0077 NS033/071 HEX. HEAD SCR. M8X55 -10.94.00
0078 L915.32-1607.1/4 ECCNTRIC BUSH2.00
0079 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00
0081 L100-3640.1/4 PIN1.00
0082 L560.02-5706.0/4 PNEU.CYLINDER B 40X50 (MPS:6101.00
0083 L100-3641.1/4 FORK1.00
0084 L560.02-8719.1/4 PIN2.00
0085 L560.02-9952.1/4 LEVER1.00
0086 NS363/013 MALE EL.LCK-1/4-PK-6 8 44722.00
3 3/

97. L546.22-13018.0/9 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 546 C/O
L560.22-14119.0/9 ROLLER BRACKET ASSLY FW2 BOTTOM FOR 560 C/O
L578.22-13145.0/1 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 578 C/O
20-32/1
GROUP
REV - 004 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L915.32-1246.1/4 SHAFT1.00
0002 L560.02-16323.1/4 ECCENTRIC BUSH4.00
0003 NS001/017 TAPER PIN 6X455.00
0004 L560.02-16324.1/4 LEVER4.00
0005 NS016/023 FLT HEX NUT M10X14.00
0008 NS143/069 SINTERED BUSH 25X32X16 FOR 546 C/O4.00
NS143/069 SINTERED BUSH 25X32X16 FOR 560 C/O4.00
U850A2559.1/4 BUSH FOR 578 C/O4.00
0010 NS029/026 SOC. HD. CAP SCREW M6X1613.00
0012 NS019/014 CIRCLIP FOR SHAFT 154.00
0013 U850A2594.1/4 LEVER4.00
0014 L915.32-1242.1/4 PIN2.00
0015 L560.02-4057.1/3 LEVER SII1.00
L578.02-14329.1/3 LEVER SII1.00
0016 NS019/007 CIRCLIP FOR SHAFT 2512.00
0017 L915.32-1861.1/4 ADJUSTING SPUR GEAR12.00
0018 U850A2581.1/4 LOCK RING8.00
0019 U850A2580.1/3 ECCENTRIC PIN8.00
0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00
0021 NS079/003 STEEL BALL 6MM12.00
0022 L560.02-4056.1/3 LEVER SI1.00
L578.02-14328.1/3 LEVER SI1.00
0023 T915B2424.1/3 ECCNTRIC PIN4.00
1 3/

98. L546.22-13018.0/9 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 546 C/O
L560.22-14119.0/9 ROLLER BRACKET ASSLY FW2 BOTTOM FOR 560 C/O
L578.22-13145.0/1 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 578 C/O
20-32/1
GROUP
REV - 004 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0024 T915B2423.1/4 LOCK RING4.00
0025 L915.32-1076.1/2 LEVER SII FW2,FW31.00
0026 L915.32-1077.1/2 LEVER SI FW2,FW31.00
0027 L915.32-4004.1/2 LEVER1.00
0028 L915.32-4149.1/3 LEVER1.00
0029 L915.32-4150.1/3 LEVER1.00
0030 L915.32-4005.1/2 LEVER1.00
0035 T915B2521.1/4 BRACKET2.00
0036 NS034/005 HEXAGONAL NUT M8X1.258.00
0037 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00
0038 L560.02-13020.1/3 LEVER SI1.00
0043 L361.20-8827.1/4 STOPPER4.00
0044 L361.20-7410.1/4 HEXAGONAL BOLT4.00
0045 L361.20-7409.1/4 PIN4.00
0046 NS085/058 HELI.TEN.SPRING A2.5X18X106.00
0047 NS094/006 SPRING SCREW M6X284.00
0048 L560.02-13021.1/3 LEVER SII1.00
0049 NS041/017 SOC. GROOVED PIN 5X2012.00
0054 L915.32-1724.1/4 PIN1.00
0055 NS333/005 BEARING SPACER 8X16X41.00
0057 NS019/003 CIRCLIP FOR SHAFT 121.00
0058 L560.02-13950.1/4 STUD (125) FOR 546 C/O2.00
L560.02-14116.1/4 STUD (115) FOR 560 C/O2.00
2 3/

99. L546.22-13018.0/9 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 546 C/O
L560.22-14119.0/9 ROLLER BRACKET ASSLY FW2 BOTTOM FOR 560 C/O
L578.22-13145.0/1 ROLLER BRACKET ASLY.FW2 BOTTOM FOR 578 C/O
20-32/1
GROUP
REV - 004 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0058 L560.02-8650.1/4 STUD (108) FOR 578 C/O2.00
0061 NS005/018 SPLIT CUTTER PIN 1.6X141.00
0063 NS073/007 SPRING WASHER BM 812.00
0066 NS333/009 BEARING SPACER 9X16X126.00
0067 NS023/016 HEX BOLT WITH STEP 8X164.00
0068 NS023/003 HEX BOLT WITH STEP M6X2012.00
0073 L361.20-7399.1/4 RING2.00
0078 L915.32-1286.1/4 STUD2.00
0080 NS016/034 FLT HEX NUT M10X1 L.H.4.00
0081 L915.32-1607.1/4 ECCNTRIC BUSH2.00
0083 L100-3641.1/4 FORK1.00
0085 L100-3640.1/4 PIN1.00
0086 L560.02-5706.0/4 PNEU.CYLINDER B 40X50 (MPS:6101.00
0087 L560.02-8719.1/4 PIN2.00
0088 L560.02-9952.1/4 LEVER1.00
0089 NS033/071 HEX. HEAD SCR. M8X55 -10.98.00
0090 NS363/013 MALE EL.LCK-1/4-PK-6 8 44722.00
3 3/

102. L546.22-9985.0/9 ROLLER BRACKET ASSY.FW1 UPPER FOR 546 C/O
L560.02-4065.0/1 ROLLER BRACKET ASSY.FW1 UPPER FOR 560 C/O
L578.22-8629.0/1 ROLLER BRACKET ASSY.FW1 UPPER FOR 578 C/O
20-33
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L915.32-1246.1/4 SHAFT1.00
0002 L560.02-16323.1/4 ECCENTRIC BUSH4.00
0003 NS001/017 TAPER PIN 6X455.00
0004 L560.02-16324.1/4 LEVER4.00
0005 NS016/023 FLT HEX NUT M10X14.00
0006 L560.01-3579.1/4 STUD (50)2.00
0008 NS143/069 SINTERED BUSH 25X32X164.00
0010 NS029/026 SOC. HD. CAP SCREW M6X1611.00
0012 NS019/014 CIRCLIP FOR SHAFT 154.00
0013 U850A2594.1/4 LEVER4.00
0014 L915.32-1242.1/4 PIN2.00
0015 L915.32-1066.1/3 LEVER SII FW11.00
0016 NS019/007 CIRCLIP FOR SHAFT 2512.00
0017 L915.32-1861.1/4 ADJUSTING SPUR GEAR12.00
0018 U850A2581.1/4 LOCK RING8.00
0019 U850A2580.1/3 ECCENTRIC PIN8.00
0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00
0021 NS079/003 STEEL BALL 6MM12.00
0022 L915.32-1067.1/3 LEVER SI FW11.00
0023 T915B2424.1/3 ECCNTRIC PIN4.00
0024 T915B2423.1/4 LOCK RING4.00
0025 L915.32-1058.1/2 LEVER SII FW11.00
0026 L915.32-1059.1/2 LEVER SI FW11.00
1 3/

103. L546.22-9985.0/9 ROLLER BRACKET ASSY.FW1 UPPER FOR 546 C/O
L560.02-4065.0/1 ROLLER BRACKET ASSY.FW1 UPPER FOR 560 C/O
L578.22-8629.0/1 ROLLER BRACKET ASSY.FW1 UPPER FOR 578 C/O
20-33
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0027 L560.02-13886.1/3 LEVER SI1.00
0028 L915.32-4149.1/3 LEVER1.00
0029 L915.32-4150.1/3 LEVER1.00
0030 L560.02-13888.1/3 LEVER SII1.00
0035 T915B2521.1/4 BRACKET2.00
0036 NS034/005 HEXAGONAL NUT M8X1.2510.00
0037 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00
0038 L915.32-4017.1/2 LEVER1.00
0039 L361.30-2997.0/4 PNEUMATIC CYLINDER ASSEMBLY4.00
0043 L361.20-8827.1/4 STOPPER3.00
0044 L361.20-7410.1/4 HEXAGONAL BOLT3.00
0045 L361.20-7409.1/4 PIN2.00
0046 NS085/058 HELI.TEN.SPRING A2.5X18X104.00
0047 NS094/006 SPRING SCREW M6X283.00
0048 L915.32-4018.1/2 LEVER1.00
0049 NS041/017 SOC. GROOVED PIN 5X2012.00
0054 L915.32-1724.1/4 PIN1.00
0055 NS333/005 BEARING SPACER 8X16X41.00
0057 NS019/003 CIRCLIP FOR SHAFT 121.00
0058 L560.02-6957.1/4 STUD (55) FOR 578 C/O2.00
L560.02-6958.1/4 STUD (70) FOR 546 C/O2.00
L915.32-1577.1/4 STUD (60) FOR 560 C/O2.00
0059 L361.20-3132.1/4 STOP BOLT3.00
2 3/

104. L546.22-9985.0/9 ROLLER BRACKET ASSY.FW1 UPPER FOR 546 C/O
L560.02-4065.0/1 ROLLER BRACKET ASSY.FW1 UPPER FOR 560 C/O
L578.22-8629.0/1 ROLLER BRACKET ASSY.FW1 UPPER FOR 578 C/O
20-33
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0060 L560.02-14635.1/4 STUD2.00
0061 NS005/018 SPLIT CUTTER PIN 1.6X141.00
0063 NS073/007 SPRING WASHER BM 810.00
0066 NS333/009 BEARING SPACER 9X16X126.00
0068 NS023/003 HEX BOLT WITH STEP M6X2012.00
0073 L361.20-7399.1/4 RING2.00
0075 NS016/034 FLT HEX NUT M10X1 L.H.4.00
0076 L100-3640.1/4 PIN1.00
0077 L100-3641.1/4 FORK1.00
0079 L560.02-5706.0/4 PNEU.CYLINDER B 40X50 (MPS:6101.00
0080 L560.02-8719.1/4 PIN2.00
0081 L560.02-9952.1/4 LEVER1.00
0082 NS033/071 HEX. HEAD SCR. M8X55 -10.93.00
0083 NS033/088 HEX. HEAD SCR. M8X60 -10.93.00
3 3/

107. L546.22-9987.0/9 ROLLER BRACKET ASSY.FW2 UPPER FOR 546 C/O
L560.02-4064.0/1 ROLLER BRACKET ASSY.FW2 UPPER FOR 560 C/O
L578.22-8630.0/1 ROLLER BRACKET ASSY.FW2 UPPER FOR 578 C/O
20-34
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L915.32-1246.1/4 SHAFT1.00
0002 L560.02-16323.1/4 ECCENTRIC BUSH4.00
0003 NS001/017 TAPER PIN 6X455.00
0004 L560.02-16324.1/4 LEVER4.00
0005 NS016/023 FLT HEX NUT M10X14.00
0006 L560.01-3579.1/4 STUD (50) FOR 546 C/O2.00
L560.01-3579.1/4 STUD (50) FOR 560 C/O2.00
L915.32-1577.1/4 STUD (60) FOR 578 C/O2.00
0008 NS143/069 SINTERED BUSH 25X32X164.00
0010 NS029/026 SOC. HD. CAP SCREW M6X1613.00
0012 NS019/014 CIRCLIP FOR SHAFT 154.00
0013 U850A2594.1/4 LEVER4.00
0014 L915.32-1242.1/4 PIN2.00
0015 L915.32-1067.1/3 LEVER SI FW11.00
0016 NS019/007 CIRCLIP FOR SHAFT 2512.00
0017 L915.32-1861.1/4 ADJUSTING SPUR GEAR12.00
0018 U850A2581.1/4 LOCK RING8.00
0019 U850A2580.1/3 ECCENTRIC PIN8.00
0020 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.812.00
0021 NS079/003 STEEL BALL 6MM12.00
0022 L915.32-1066.1/3 LEVER SII FW11.00
0023 T915B2424.1/3 ECCNTRIC PIN4.00
0024 T915B2423.1/4 LOCK RING4.00
1 3/

108. L546.22-9987.0/9 ROLLER BRACKET ASSY.FW2 UPPER FOR 546 C/O
L560.02-4064.0/1 ROLLER BRACKET ASSY.FW2 UPPER FOR 560 C/O
L578.22-8630.0/1 ROLLER BRACKET ASSY.FW2 UPPER FOR 578 C/O
20-34
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0025 L915.32-1058.1/2 LEVER SII FW11.00
0026 L915.32-1059.1/2 LEVER SI FW11.00
0027 L915.32-4011.1/2 LEVER1.00
0028 L915.32-1140.1/3 LEVER SI FW1,FW2,FW31.00
0029 L915.32-1070.1/3 LEVER SII FW1,FW2,FW31.00
0030 L915.32-4012.1/2 LEVER1.00
0035 T915B2521.1/4 BRACKET2.00
0036 NS034/005 HEXAGONAL NUT M8X1.258.00
0037 NS033/033 HEX. HEAD SCR. M8X30 -10.94.00
0038 L915.32-4017.1/2 LEVER1.00
0039 L361.30-2997.0/4 PNEUMATIC CYLINDER ASSEMBLY4.00
0041 NS033/004 HEX. HEAD SCR. M6X20-10.96.00
0043 L361.20-8827.1/4 STOPPER3.00
0044 L361.20-7410.1/4 HEXAGONAL BOLT3.00
0045 L361.20-7409.1/4 PIN6.00
0046 NS085/058 HELI.TEN.SPRING A2.5X18X1010.00
0047 NS094/006 SPRING SCREW M6X283.00
0048 L915.32-4018.1/2 LEVER1.00
0049 NS041/017 SOC. GROOVED PIN 5X2012.00
0054 L915.32-1724.1/4 PIN1.00
0055 NS333/005 BEARING SPACER 8X16X41.00
0057 NS019/003 CIRCLIP FOR SHAFT 121.00
0058 L560.01-3580.1/4 STUD (76) FOR 546 C/O2.00
2 3/

109. L546.22-9987.0/9 ROLLER BRACKET ASSY.FW2 UPPER FOR 546 C/O
L560.02-4064.0/1 ROLLER BRACKET ASSY.FW2 UPPER FOR 560 C/O
L578.22-8630.0/1 ROLLER BRACKET ASSY.FW2 UPPER FOR 578 C/O
20-34
GROUP
REV - 003 2/13/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0058 L560.01-3580.1/4 STUD (76) FOR 560 C/O2.00
L915.32-1286.1/4 STUD FOR 578 C/O2.00
0061 NS005/018 SPLIT CUTTER PIN 1.6X141.00
0063 NS073/007 SPRING WASHER BM 810.00
0066 NS333/009 BEARING SPACER 9X16X126.00
0068 NS023/003 HEX BOLT WITH STEP M6X2012.00
0073 L361.20-7399.1/4 RING2.00
0075 NS016/034 FLT HEX NUT M10X1 L.H.4.00
0076 NS033/071 HEX. HEAD SCR. M8X55 -10.93.00
0077 NS033/088 HEX. HEAD SCR. M8X60 -10.93.00
0078 L100-3640.1/4 PIN1.00
0079 L100-3641.1/4 FORK1.00
0081 L560.02-5706.0/4 PNEU.CYLINDER B 40X50 (MPS:6101.00
0082 L560.02-8719.1/4 PIN2.00
0083 L560.02-9952.1/4 LEVER1.00
0084 NS363/013 MALE EL.LCK-1/4-PK-6 8 44722.00
3 3/

112. / #! &
/ #!
#
" "
" "
%
" "
! //
%
(!
" "

113. / #! &
/ #!
% %
% %
%
% # ! $ $
" # "
% # "
% %
% ( " "
# ! "
# ! "
% # ! $ $
% ! " "
# ! "
# ! "
% ( " "
" # "

114. / #! &
/ #!
! " (
# ! "
% # ! " "
" "
% ( " "
" # "

117. #
(
! //
(
" # "
# ! "
# # "
% %
% # ! $ $

119. ! & '
! & '
! ! 11 %
! ! 11 %
! ! 11 %
! ! 11 %
//
//
(
#
# ( # ! "
" " /
" # "
" # "
% # ! " "
" "
" # "
" # "
( # ! "
% "

120. ! & '
! & '
#
#
# ! $
#

123. L915.32-1096.0/1 ROLLER WASHING DEVICE FW 1 PU1
L915.32-1097.0/1 ROLLER WASHING DEVICE FW 2 PU2
L915.32-1098.0/1 ROLLER WASHING DEVICE FW 3 PU3
01-18
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L361.20-8869.1/4 LEVER1.00
0002 NS084/019 H.C.SPRING A 1.1X7.5X11.5X241.00
0003 L560.01-3965.1/3 BLADE BEAM1.00
0004 NS084/189 H.C.SPRING A1.1X19X11.5X1111.00
0005 L361.20-7587.1/4 ADAPTOR1.00
0006 L361.20-5578.1/4 STUD1.00
0007 NS084/025 H.C.SPRING B 0.8X8X7.5X202.00
0008 L361.20-8870.1/4 LOCKING SEGMENT1.00
0009 L361.20-5584.1/4 STAY BOLT4.00
0010 NS088/002 ACTUATING ROD A 8X50 PU11.00
NS088/002 ACTUATING ROD A 8X50 PU21.00
0011 L915.32-1649.0/3 PAN ASSEMBLY1.00
0012 L915.32-1102.1/3 SUPPORT BLADE1.00
0013 L915.32-1103.1/3 DUCTOR BLADE1.00
0014 L915.32-1104.1/3 BEAM1.00
0015 NS333/128 BEARING SPACER 16X22X121.00
0016 L361.20-8877.1/4 ACTUATING ROD PU31.00
0017 L915.32-1594.1/4 BRACKET2.00
0018 NS019/016 CIRCLIP FOR SHAFT 221.00
0019 NS029/107 SOC. HD. CAP SCREW M6X701.00
0020 NS008/003 CHAMFERED WASHER 6.4x12x1.53.00
0021 NS056/021 BALL HANDLE B18 BLACK1.00
0022 NS039/021 GROOVED TAP. PIN(HALF LG) 6X321.00
1 2/

124. L915.32-1096.0/1 ROLLER WASHING DEVICE FW 1 PU1
L915.32-1097.0/1 ROLLER WASHING DEVICE FW 2 PU2
L915.32-1098.0/1 ROLLER WASHING DEVICE FW 3 PU3
01-18
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0023 NS039/010 GROOVED TAP. PIN(HALF LG) 4X323.00
0024 NS033/004 HEX. HEAD SCR. M6X20-10.92.00
0025 NS272/006 SOC.CSK HD.SCREW M6X1214.00
0026 L915.32-1593.1/4 STUD4.00
0027 NS033/037 HEX. HEAD SCR. M10X16 -10.94.00
0028 NS033/030 HEX. HEAD SCR. M6X16 -10.94.00
0029 L560.01-4266.1/4 BUSH1.00
0030 NS033/031 HEX. HEAD SCR. M6X40 -10.94.00
0031 NS333/122 BEARING SPACER 6X16X34.00
2 2/

127. L560.02-8571.0/9 LUBRICATION PUMP ASSLY.(HL-45)
20-39
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L560.02-8564.0/3 ANGLE1.00
0002 L560.01-3180.0/9 DOWTY PUMP (1P 3017 CPSTB)1.00
0003 L560.01-3181.0/4 FLEXIBLE CLAW COUPLING1.00
0004 L560.01-3182.1/3 HOUSING1.00
0005 NE035/230 OIL PUMP MOTOR 0.37KW 415V 50H1.00
0006 NS033/012 HEX. HEAD SCR. M8X20 -10.96.00
0007 NS033/004 HEX. HEAD SCR. M6X20-10.94.00
0008 NS029/011 SOC. HD. CAP SCREW M10X252.00
0009 L560.01-4432.1/4 STRAIGHT CONNECTOR1.00
1 1/

129. L560.02-13663.0/3 MACKLING RING LUBRI.ASSY.RIGHT RIGHT
L560.02-13664.0/3 MACKLING RING LUBRI.ASSY.LEFT LEFT
20-40/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L100-3670.1/4 RING1.00
0002 L560.02-13658.1/4 STAY BOLT1.00
0003 L560.02-13659.1/4 FELT CARRIER1.00
0004 L560.02-13660.1/4 FELT STRIP1.00
0005 L560.02-13661.1/4 TORSION SPRING (LEFT) LEFT1.00
L560.02-13662.1/4 TORSION SPRING (RIGHT) RIGHT1.00
0006 NS029/026 SOC. HD. CAP SCREW M6X161.00
0007 NS083/036 END DISC A 5.3X20X31.00
0008 NS272/003 SOC.CSK HD.SCREW M5X121.00
1 1/

142. L915.32-1219.0/1 WEB BRAKE DETECTOR ASSEMBLY Y FOR Y UNIT
L915.32-1303.0/1 WEB BRAKE DETECTOR ASSEMBLY H FOR H UNIT
01-41
GROUP
REV - 001 2/7/05
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 NE062/022 IFM PHOTO.,EFFECT-200 OG5049-1.00
0002 L560.01-3664.1/4 CLAMP1.00
0003 L361.40-3659.1/4 HOLDER1.00
0004 L915.32-1218.1/4 SHAFT FOR Y UNIT1.00
L915.32-1301.1/4 SHAFT FOR H UNIT1.00
0005 L361.40-4729.1/3 LEVER FOR H UNIT2.00
L361.40-4886.1/4 LEVER FOR Y UNIT2.00
0006 L361.40-4730.1/4 BOLT2.00
0008 NS033/014 HEX. HEAD SCR. M8X40 -10.91.00
0009 NS033/015 HEX. HEAD SCR. M8X45 -10.9 FOR H UNIT2.00
NS033/015 HEX. HEAD SCR. M8X45 -10.9 FOR Y UNIT4.00
0010 NS033/030 HEX. HEAD SCR. M6X16 -10.92.00
1 1/

144. ! ( #
% - %%
#
%
" # "
" # "
" # "

146. % # & ('
% # & # ('
% # # ( & '
#
" # "
" # "
% #
(
% #
(
% #
" # "
#
# ! "
# ! $

147. % # & ('
% # & # ('
% # # ( & '
# ! "
#
(
#
#

151. L100-9160.0/9 BUSTLE WHEEL ASSEMBLY
20-60/2
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L100-9159.1/3 BRACKET2.00
0002 L560.01-2802.1/4 PIN2.00
0003 NS008/004 CHAMFERED WASHER 8.4x17x1.52.00
0004 NS019/013 CIRCLIP FOR SHAFT 82.00
0005 L560.01-2800.1/4 PIN2.00
0006 L560.01-2801.1/4 WHEEL2.00
0007 L560.01-2803.1/4 KNURLED KNOB2.00
0008 L560.02-14665.1/4 SHAFT1.00
0009 L560.02-6870.1/4 BUSH2.00
0010 NS001/031 TAPER PIN 3X162.00
0011 NS019/003 CIRCLIP FOR SHAFT 128.00
0012 NS020/023 CIRCLIP FOR BORE 284.00
0013 NS029/026 SOC. HD. CAP SCREW M6X164.00
0014 NS029/032 SOC. HD. CAP SCREW M8X402.00
0015 NS059/123 SINGLE ROW BALL BRG 6001-ZZ2.00
0016 NS333/208 BEARING SPACER 12X35X3.52.00
1 1/

153. L560.22-16563.0/2 MOTORISED BUSTLE WHEEL ASLY.WITH PHOTO
SENSOR
20-60/3
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L560.02-13032.1/4 SPINDLE1.00
0004 NS029/002 SOC. HD CAP SCREW M6x208.00
0005 L560.02-13025.1/4 FLANGE2.00
0007 NS029/032 SOC. HD. CAP SCREW M8X403.00
0010 NS019/013 CIRCLIP FOR SHAFT 82.00
0011 L560.02-7385.1/4 COUPLING2.00
0012 NS029/007 SOC. HD.CAP SCREW M8X254.00
0013 L560.02-7383.1/3 PLATE2.00
0014 NS073/005 SPRING WASHER BM 68.00
0016 NE035/356 7KG.CM.AC SYN.MOTOR SYN901(S)2.00
0019 L560.01-2801.1/4 WHEEL2.00
0020 NS019/003 CIRCLIP FOR SHAFT 126.00
0021 NS020/023 CIRCLIP FOR BORE 284.00
0022 NS059/123 SINGLE ROW BALL BRG 6001-ZZ2.00
0023 L560.02-7386.1/4 PIN2.00
0027 L560.02-13031.1/4 LOCATING PIN3.00
0028 L560.02-7384.1/4 PIN2.00
0030 L560.02-7382.1/3 PLATE2.00
0031 NS001/016 TAPER PIN 6X401.00
0032 NS134/019 SOC.SET SCR.(CUP PT) M6X84.00
0033 NS333/208 BEARING SPACER 12X35X3.52.00
0034 NE062/039 IFM,PHOTO SENSOR1.00
0035 X915C1207.1/4 WEB BREAK DET.MOUNTING PLATE1.00
1 2/

155. L546.22-14218.0/9 WEB TENSION ASSLY WITH PIV FOR 546 C/O
L560.22-14696.0/9 WEB TENSION ASSLY WITH PIV FOR 560 C/O
L578.22-14695.0/9 WEB TENSION ASSLY WITH PIV FOR 578 C/O
20-68/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0002 W30.97035-1000 SPANNSATZ*IS1 24X50* MIT2.00
0003 L100-8825.1/3 SPUR GEAR1.00
0005 L100-9953.1/4 BUSH1.00
0008 L560.02-11908.1/4 COUPLING1.00
0012 L560.02-9286.1/4 BELT PULLEY1.00
0013 L560.22-4108.0/3 TENSION RUBBER ROLLER1.00
0017 L578.22-14590.2/3 TENSION ROLLER1.00
0018 L915.32-1320.1/4 STUD2.00
0019 NS019/006 CIRCLIP FOR SHAFT 203.00
0021 NS020/012 CIRCLIP FOR BORE 802.00
0022 NS020/014 CIRCLIP FOR BORE 621.00
0023 NS029/002 SOC. HD CAP SCREW M6x202.00
0024 NS029/009 SOCKET HD CAP SCREW M8X352.00
0028 NS033/030 HEX. HEAD SCR. M6X16 -10.98.00
0029 NS033/032 HEX. HEAD SCR. M8X16 -10.92.00
0035 NS059/027 SINGLE ROW BALL BRG 62062.00
0036 NS059/087 SINGLE ROW BALL BRG 6206 ZZ1.00
0037 NS059/104 SINGLE ROW BALL BRG 6307 ZZC21.00
0038 NS059/113 SINGLE ROW BALL BRG 6304-ZZ2.00
0042 NS082/053 OIL SEAL A 35x55x71.00
0043 NS082/054 OIL SEAL A 35X62X71.00
0044 NS083/001 END DISC A 8.4X32X42.00
0046 NS085/058 HELI.TEN.SPRING A2.5X18X102.00
1 4/

156. L546.22-14218.0/9 WEB TENSION ASSLY WITH PIV FOR 546 C/O
L560.22-14696.0/9 WEB TENSION ASSLY WITH PIV FOR 560 C/O
L578.22-14695.0/9 WEB TENSION ASSLY WITH PIV FOR 578 C/O
20-68/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0048 NS275/048 FLAT WASHER 8.4X36X58.00
0051 NS333/065 BEARING SPACER 30X40X81.00
0055 NS333/062 BEARING SPACER 30X36X321.00
0057 L560.02-4079.1/3 LEVER SI1.00
0058 L560.02-4080.1/3 LEVER SII1.00
0059 L560.02-9723.1/4 PIN2.00
0060 NS019/025 CIRCLIP FOR SHAFT 354.00
0062 NS034/005 HEXAGONAL NUT M8X1.252.00
0063 NS094/001 SPRING SCREW M6X102.00
0064 U850A2580.1/3 ECCENTRIC PIN2.00
0066 NS041/017 SOC. GROOVED PIN 5X202.00
0067 NS079/003 STEEL BALL 6MM2.00
0068 NS084/186 H.C.SPRING A0.9X6.3X7.5X12.82.00
0069 U850A2581.1/4 LOCK RING2.00
0070 L351.69-0011.1/4 STAY BOLT4.00
0071 L560.02-9222.1/4 PLATE2.00
0072 L915.32-1153.1/4 CONNECTOR1.00
0075 NS016/003 FLT HEX NUT M10X1.54.00
0076 L100-9890.1/4 LOCATING PIN2.00
0077 L100-9894.1/4 HOLDER1.00
0078 L100-9895.1/4 STUD2.00
0079 L100-9992.1/4 STUD2.00
0080 L100-9888.1/3 PLATE FOR 546 C/O1.00
2 4/

157. L546.22-14218.0/9 WEB TENSION ASSLY WITH PIV FOR 546 C/O
L560.22-14696.0/9 WEB TENSION ASSLY WITH PIV FOR 560 C/O
L578.22-14695.0/9 WEB TENSION ASSLY WITH PIV FOR 578 C/O
20-68/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0080 L560.02-14693.1/3 PLATE FOR 560 C/O1.00
L578.02-14694.1/3 PLATE FOR 578 C/O1.00
0081 NS008/006 CHAMFERED WASHER 13x24x22.00
0082 NS029/015 SOC. HD. CAP SCREW M12X355.00
0084 NS033/020 HEX. HEAD SCR. M12X30 -10.94.00
0085 NS034/007 HEXAGONAL NUT M12X1.752.00
0087 L100-10189.1/4 TIMING BELT PULLY (8M-35S-24)1.00
0088 L100-10190.1/4 TIMING BELT PULLY (8M-35S-24)1.00
0089 L100-10191.1/4 TIMING BELT 720-8M-24 POLYCHAI1.00
0090 NS033/013 HEX. HEAD SCR. M8X25 -10.93.00
0091 NS075/009 FEATHER KEY A 8X7X251.00
0092 NS333/142 BEARING SPACER 30X36X402.00
0094 L100-8824.1/3 SPUR GEAR1.00
0095 L100-9889.1/4 INTERMEDIATE BOLT1.00
0096 NS019/011 CIRCLIP FOR SHAFT 301.00
0097 NS020/027 CIRCLIP FOR BORE 552.00
0098 NS033/012 HEX. HEAD SCR. M8X20 -10.98.00
0099 NS059/007 SINGLE ROW BALL BRG 60062.00
0102 L100-10188.1/4 TIMING BELT PULLY (8M-30S-24)2.00
0103 L100-9891.1/4 PIN1.00
0104 L560.04-4838.1/4 PIN1.00
0106 NS020/008 CIRCLIP FOR BORE 472.00
0108 NS059/005 SINGLE ROW BALL BRG 62041.00
3 4/

158. L546.22-14218.0/9 WEB TENSION ASSLY WITH PIV FOR 546 C/O
L560.22-14696.0/9 WEB TENSION ASSLY WITH PIV FOR 560 C/O
L578.22-14695.0/9 WEB TENSION ASSLY WITH PIV FOR 578 C/O
20-68/1
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0111 L100-4273.1/4 PIN1.00
0112 L100-9892.1/4 BRACKET1.00
0113 L100-9893.1/4 BLOCK1.00
0114 NS008/005 CHAMFERED WASHER 10.5x20x22.00
0115 NS016/004 FLT HEX NUT M12X1.751.00
0116 NS019/007 CIRCLIP FOR SHAFT 252.00
0118 NS029/134 SOC. HD.CAP SCREW M10X552.00
0120 NS033/092 HEX. HEAD SCR. M12X80 -10.91.00
0121 NS033/134 HEX. HEAD SCR. M10X70 -10.92.00
0122 NS059/026 SINGLE ROW BALL BRG 60052.00
0124 NS333/039 BEARING SPACER 25X32X42.00
4 4/

165. % # #
" # "
% "
# "
# "
" "
/ # #
) " "
! % !
! " "
# ! "
" "

167. ( # # & '
# # (
%
# ! $
" " "

169. L560.02-6962.0/3 INK DUCT ROLL.DRIVE UPPER
20-76
GROUP
REV - 001 4/10/2006
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L560.02-6840.0/3 PLANETARY GEAR BOX (INK DRIVE)1.00
0002 NE007.036.083 PMDC MOTOR DAMP/INK (HL) CYCLO1.00
0003 NS033/004 HEX. HEAD SCR. M6X20-10.910.00
0005 L560.02-6862.1/3 SPUR GEAR2.00
0006 NS083/063 END DISC A8.4X28X42.00
0007 NS272/009 SOC.CSK HD.SCREW M8X202.00
0008 NS075/050 FEATHER KEY A 6X6X161.00
1 1/

171. ! #
# #
& '
%
# ! "
(
(
! # (
! #
# ! $
! //
% %
%
#
! //
% %
%
! //
%

173. # % 5 #
% & 5 # ('
% ( " "
(
# ! "
!
0
" "
% %
#
" "
%
" "
!
" "
( ! & 11'
( "

174. # % 5 #
(
# % !
! 6
" # "
( ! & 11'
( "
% (
% ! % " "
" "
"
! " (
# ! "
" "
( &
# ! "

175. # % 5 #
# ! "
# ! $
# ! "
" ,
#
# # "
" # "
(
(
#
# #
& ' "
% # "
& #' "
( & " " '
( & " " '
# ! "
( #

176. # % 5 #
%
#
% " "
#) " "
# ! "
# ! "
" " "
& ' "
% # ! $ $

180. # % # 5 #
!
% " "
% ! " "
% & # #'
# ! "
!
!
# ! "
"
" # "

182. # % # 5
%
% ( " "
(
# ! "
!
0
" "
% %
#
" "
%
" "
!
" "
( ! & 11'
( "

183. # % # 5
(
# % !
! 6
" "
" # "
( ! & 11'
( "
% (
% ! % " "
" "
"
! " (
# ! "
" "
# ! "
# ! "
# ! $

184. # % # 5
# ! "
" ,
#
# # "
(
(
#
# #
% # "
& #' "
( & " " '
( & " " '
# ! "
( #
%
#

185. # % # 5
% " "
#) " "
# ! "
# ! "
" " "
& ' "

189. #
" # "
% ! " "
" # # "
# ! "
!
%
% %
% %
# ! $

191. L560.02-14269.0/2 PIV MORORISED VARIAOR ASSLY.
20-86
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L100-9902.1/4 COVER1.00
0002 NS029/002 SOC. HD CAP SCREW M6x202.00
0003 NS333/005 BEARING SPACER 8X16X43.00
0004 L100-9906.1/4 STUD4.00
0005 L100-9915.1/3 PLATE1.00
0006 L560.02-13074.1/4 PIN1.00
0007 L560.02-5939.1/4 HOLDER1.00
0008 L560.02-8779.1/4 STAY BOLT1.00
0009 NE035/314 SRIJAN, AC SY.MOTOR, 60 RPM1.00
0010 NE052/036 BOURNS,10 TURN,1K,2W POTENTIOM1.00
0011 NS003/017 SLT.CH.HD.SCREW M6X124.00
0012 NS019/005 CIRCLIP FOR SHAFT 161.00
0013 NS021/027 SLOT.GR.SCR.-FLAT END M5X121.00
0014 NS029/003 SOC. HD CAP SCREW M6x254.00
0015 NS029/008 SOC. HD.CAP SCREW M8x304.00
0016 NS029/050 SOC. HD. CAP SCREW M6X101.00
0017 NS029/059 SOC. HD. CAP SCREW M4x123.00
0018 NS033/013 HEX. HEAD SCR. M8X25 -10.94.00
0019 NS075/124 FEATHER KEY A4X4X222.00
0020 NS333/011 BEARING SPACER 10X20X31.00
0021 W60.50000-0125 PLANETARY GEAR BOX1.00
0022 W60.70674-0001 COUPLING1.00
0023 W60.70678-0019 SPUR GEAR1.00
1 2/

192. L560.02-14269.0/2 PIV MORORISED VARIAOR ASSLY.
20-86
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0024 W60.70678-0020 SPUR GEAR1.00
0025 Z660.47-2.30:4 NUT1.00
2 2/

194. L560.02-14309.0/0 PRINT UNIT PIV ASSLY.
20-87
GROUP
REV - 001 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 W60.70676-0070 SHAFT21.00
0002 NS059/003 SINGLE ROW BALL BRG 62021.00
0003 NS333/247 BEARING SPACER 15X18X31.00
0004 NS019/014 CIRCLIP FOR SHAFT 151.00
0005 W60.70678-0076 HELICAL GEAR1.00
0006 NS276A/044 SPRING DOWEL PIN 4X252.00
0007 NS059/039 SINGLE ROW BALL BRG 6201 ZZ2.00
0008 NS059/017 SINGLE ROW BALL BRG 6203 ZZ3.00
0009 NS075/001 FEATHER KEY A 5X5X122.00
0010 NS077/051 FITTING WASHER 17X24X14.00
0011 W60.70676-0069 SHAFT WITH SUN WHEEL1.00
0012 W60.70678-0074 SPUR GEAR1.00
0013 W60.70678-0068 OUTPUT SHAFT1.00
0014 NS029/027 SOC. HD. CAP SCREW M6X304.00
0015 W60.70678-0075 HELICAL GEAR1.00
0016 W60.97040-0001 BALL BEARING 6206 NR DESIGN.SP2.00
0017 NS019/011 CIRCLIP FOR SHAFT 302.00
0019 L100-10753.1/3 PRESSURE FLANGE1.00
0021 NS062/014 SINGLE THRUST B/BEARING 512061.00
0022 W60.70631-0066 BEARING BLOCK1.00
0023 W60.70678-0077 HELICAL GEAR1.00
0025 NS019/003 CIRCLIP FOR SHAFT 121.00
0026 NS073/001 SPRING WASHER BM 44.00
1 4/

195. L560.02-14309.0/0 PRINT UNIT PIV ASSLY.
20-87
GROUP
REV - 001 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0027 NS029/071 SOC. HD. CAP SCREW M4X164.00
0028 W60.70600-0055 DRIVE CORRECTION BRACKET ASSY.1.00
0029 W60.70678-0071 HELICAL GEAR1.00
0030 NS029/026 SOC. HD. CAP SCREW M6X164.00
0031 W60.70638-0080 FLANGE1.00
0032 NS029/051 SOC. HD. CAP SCREW M5X164.00
0033 W60.70678-0072 ANNULUS GEAR1.00
0034 NS059/157 SINGLE ROW BALL BRG 160061.00
0035 NS020/027 CIRCLIP FOR BORE 551.00
0036 NS172/010 RING 30X40X31.00
0037 NS172/021 RING 30X40X41.00
0038 NS059/027 SINGLE ROW BALL BRG 62061.00
0039 W60.70676-0067 I/P SHAFT/PLANET CARRIER1.00
0040 NS135/018 SOC.SET SCR.(CONE PT) M5X82.00
0041 W60.70611-0078 PIN2.00
0042 NS077/013 FITTING WASHER 15X22X14.00
0043 NS077/050 FITTING WASHER 15X22X0.54.00
0044 NS338/006 NEEDLE CAGE K 14 18 17 H2.00
0045 W60.70678-0073 PLANET GEAR2.00
0046 W60.70615-0064 END CAP2.00
0047 NS082/010 OIL SEAL A 30X40X72.00
0048 NS029/006 SOC. HD.CAP SCREW M8X208.00
0049 W60.70615-0089 END CAP1.00
2 4/

196. L560.02-14309.0/0 PRINT UNIT PIV ASSLY.
20-87
GROUP
REV - 001 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0050 W60.70698-0082 DISC SPRING1.00
0051 W60.70601-0085 PLATE1.00
0052 NS062/001 SINGLE THRUST B/BEARING 511081.00
0053 W60.70698-0081 SHIM1.00
0054 W60.70601-0084 PLATE1.00
0055 NS029/031 SOC. HD. CAP SCREW M8X1624.00
0056 W60.70615-0062 RIGHT COVER PLATE1.00
0057 W60.70614-0061 PIV HOUSING1.00
0058 W60.70615-0063 LEFT COVER PLATE1.00
0059 NS147/005 SEALING BOLT M10X1X15.51.00
0060 L560.02-21112.2/3 BRACKET1.00
0061 W60.70638-0096 BUSH1.00
0062 NS143/017 SINTERED BUSH 20X26X252.00
0063 W60.70676-0095 SHAFT1.00
0064 NS019/006 CIRCLIP FOR SHAFT 202.00
0065 K136-17.04.09:2 BEVEL GEAR2.00
0066 NS075/056 FEATHER KEY A 5X5X282.00
0067 NS019/005 CIRCLIP FOR SHAFT 161.00
0068 L560.02-13072.1/4 SHAFT1.00
0069 NS143/013 SINTERED BUSH 14X20X122.00
0070 L100-9914.1/3 BUSH1.00
0071 NS029/003 SOC. HD CAP SCREW M6x254.00
0075 NS019/004 CIRCLIP FOR SHAFT 141.00
3 4/

197. L560.02-14309.0/0 PRINT UNIT PIV ASSLY.
20-87
GROUP
REV - 001 2/20/2008
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0076 NS021/027 SLOT.GR.SCR.-FLAT END M5X122.00
0077 W60.70693-0088 STUD2.00
0078 W60.70693-0090 GUIDE2.00
0079 NS079/016 STEEL BALL 1/2"9.00
0080 NS275/031 FLAT WASHER 17X30X1.51.00
0081 W60.70696-0087 HEX. NUT1.00
4 4/

199. L560.22-13954.0/9 INERTIA ROLLER ASSEMBLY COMPL.
20-88
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 W06.00471-4265 PRESSURE SPRING MPN 4801 B3,6X3.00
0002 NS058/007 STAR HANDLE C503.00
0003 NS033/032 HEX. HEAD SCR. M8X16 -10.93.00
0004 NS029/050 SOC. HD. CAP SCREW M6X103.00
0005 NS029/077 SOC. HD. CAP SCREW M10X456.00
0006 NS029/036 SOC. HD. CAP SCREW M10X506.00
0007 W06.04610-2303 LENS FLANGE BOLT*MRR*22156.00
0008 NS034/007 HEXAGONAL NUT M12X1.753.00
0009 NS222/005 SELF LOCKING NUT M10X1.53.00
0010 NS008/004 CHAMFERED WASHER 8.4x17x1.53.00
0011 NS008/005 CHAMFERED WASHER 10.5x20x26.00
0012 NS008/006 CHAMFERED WASHER 13x24x23.00
0013 NS008/003 CHAMFERED WASHER 6.4x12x1.53.00
0014 NS276A/044 SPRING DOWEL PIN 4X253.00
0015 NS019/015 CIRCLIP FOR SHAFT 173.00
0016 W06.35320-2015 BUSH*DIN*1494*16B18X15*P1*6.00
0017 W30.10999-0106 CLAMP RING2.00
0018 W30.52531-0002 HOLDER3.00
0019 W30.52531-0003 SPINDLE HOLDER3.00
0020 W30.52532-0108 LEVER(W30.52532-0002)3.00
0021 W30.52573-0111 ROLLER2.00
0022 W30.52573-0112 ROLLER1.00
0023 W30.52576-0114 THREADED SPINDLE3.00
1 2/

200. L560.22-13954.0/9 INERTIA ROLLER ASSEMBLY COMPL.
20-88
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0024 W30.52525-0106 SPINDLE1.00
0025 W30.52588-0104 KAPPE*(COVER)3.00
0026 W30.52593-0001 BOLT3.00
0027 W30.52593-0112 PIN3.00
0028 W30.54100-0366 PAPIERFUEHRUNGSROLLER1.00
0029 W30.54131-0166 HOLDER2.00
0030 NS029/135 SOC. HD.CAP SCREW M10X654.00
0031 NS029/008 SOC. HD.CAP SCREW M8x304.00
0032 NS029/007 SOC. HD.CAP SCREW M8X254.00
0033 NS059/128 SINGLE ROW BALL BRG 6003ZZ6.00
0034 NS020/011 CIRCLIP FOR BORE 353.00
2 2/

202. L560.02-12182.0/9 WEB CATCHER ASSLY. INLET
1002-60
GROUP
I N D I A L T D
REVISION
HILINE EXPRESS
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 W30.10999-0107 CLAMP RING2.00
0002 NS029/007 SOC. HD.CAP SCREW M8X252.00
0003 NS029/008 SOC. HD.CAP SCREW M8x304.00
0004 W06.16760-0103 LOCKING WASHER PAIR*MPN 33104.00
0005 NS034/005 HEXAGONAL NUT M8X1.254.00
0006 L560.02-12184.1/4 HOLDER2.00
0007 W06.35320-2620 BUSH*DIN*1494*20B23X20*P1*2.00
0008 NS029/077 SOC. HD. CAP SCREW M10X454.00
0009 L560.02-12188.0/9 FINGURE GUARD ASSLY1.00
0010 NS029/045 SOC. HD. CAP SCREW M6X128.00
0011 W30.10976-0110 SPINDLE1.00
0012 W92.34517-2095 RING*MPN*4517*20X30X5*2.00
0013 L560.02-12183.1/4 LEVER1.00
0014 W30.10932-0112 LEVER1.00
0015 NS029/026 SOC. HD. CAP SCREW M6X164.00
0016 L560.02-12186.1/3 FINGURE GUARD III -12101.00
0017 W30.10955-0101 HOSE1.00
0018 W30.10920-0111 ANGLE1.00
0019 L560.03-12965.0/9 PN.ISO CYLINDER DSN-25-50-P FE1.00
0020 L560.01-10878.1/4 ROD CLEVIS TYPE B (M10X1.25)1.00
0021 W30.10993-0107 BOLT1.00

203. L560.02-12182.0/9 WEB CATCHER ASSLY. INLET
1002-60
GROUP
I N D I A L T D
REVISION
HILINE EXPRESS
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0022 NS019/013 CIRCLIP FOR SHAFT 81.00
0023 W06.02094-0207 ZYL.SCHRAUBE*DIN*912*M5X20*10.5.00
0024 W30.10922-0102 CLAMPING STRIP1.00
0025 W06.04260-1005 SENKSCHRAUBE*DIN*963*M5X8*4.8*12.00

205. L361.50-5023.0/9 HAND DRIVE ASSEMBLY
01-69
GROUP
REV -
HILINE
SR.NO. PART NUMBER QUANTITY DESCRIPTION
0001 L361.50-5020.1/3 HELICAL GEAR1.00
0002 NS001/024 TAPER PIN 8X601.00
0003 NS051/008 HAND WHEEL 310X281.00
1 1/