Basics of Autocad

1. Industrial Training
JAI BHAVANI MATA ENGITECH PVT LTD.
PREMJEET SINGH
Roll no. 1904769
Department of Mechanical Engineering
Global Group of Institutes
Amritsar
SOFTWARE
TRAINING

2. INTRODUCTION OF AUTOCAD

3. AUTOCAD
• Autocad is 2-D and 3-D modelling software.
• It is developed by AUTODESK Company.
• Autocad is an USA Based company.
• It’s initial release on December 1982.
• John Walker is developer if Autocad.
• It come in india 1988
• In another way that Autocad is a designing course
which performed by the help of computer

4. VERSION OF AUTOCAD
• THE FIRST VERSION OF AUTOCAD WAS R1 AFTER
THAT R2,R3,R4..... AND SO ON
• IN 2000, AUTODESK LAUNCHED A VERSION OF
AUTOCAD 2000AFTER THAT 2001,2002...SO ON
• THIS TIME WE HAVE THE LATEST VERSION OF
AUTOCAD IS 2020 WHICH IS LAUNCHED IN ON APRIL
2019
• TE LATEST VERSION IS EASY TO USE AND OVER
COME THE DIFFICULTIES OF OLD VERSION

5. AUTOCAD SCREEN

6. WAY TO PROVIDE COMMAND

7. HOW AUTOCAD WORKS
• THERE IS CO ORDINATE SYSTEM USED IN AUTOCAD.
• EVERY DRAWING SHOW ITS ORDINATE
• IN ABOVE NEXT SIDE THE LINE SHOW ITS VO ORDINATE THAT IS
(9,6)&(-10,-5)
• THERE IS SO MANY COMMANDS LIKE COPY, MOVE , ROTATE,
MIRROR, IN 2D ,PATH ARRAY RECTANGULAR ARRAY, POLAR ARRAY
& MORE
• DIFFERENT TYPES OF DRAWING CANBE MADE TIME BY USING A
COMMAND THAT IS LAYER

8. CO ORDINATE SYSTEM
• EVERY THING THAT DRAW IN AUTOCAD IS EXACT.
• ALL OBJECTS DRAWN ON SCREEN IS BASED ON SIMPLE X-Y CO-ORDINATE
SYSTEM.
• IN AUTOCADIS KNOWN AS WORLD CO-ORDINATE SYSTEM (WCS)
• WHERE ARE DRAWING A LINE SO WE HAVE TWO POINTS A(-10,-4)& B(9,6). AS
SHOWN IN FIG

9. DRAW TOOLBAR AND MODIFY
TOOLBAR
• FOLLOWING IMAGE SHOWS THE VERY BASIC TOOL BAR. THESE WILL BE
HEAVILY USED AS YOUR PROGRESS TOWARDS THE END OF YOUR DRAWING .
YOU CAN ACCESS THESE TOOL BARS UNDER HONE TAB.L

10. DIMENSION TOOLBAR
• AUTOCAD PROVIDE A WHOLE RANGE OF DIMENSIONING TOOLS WHICH CAN BE
USED TO QUICKLY DIMENSION ANY DRAWING WITHOUT NEED FOR
MEASUREMENTS. DIMENSIONING IN AUTOCAD IS AUTOMATIC, LINE, ARROW
AND TAXT ARE ALL TAKEN CARE OF BY THE DIMENSION COMMANDS. AUTOCAD
DIMENSION ARE SPECIAL BLOCKS WHICH CAN EASILY TO BE EDITED OR
ERASED AS NECESSARY. AUTOCAD PROVIDE LOTS OF CONTROL OVER THE
WAY TEXT STYLES, DIMENSION STYLO ALLOW YOU TO DISIGN DIMENSION SO
THAT THEY LOOK JUST THE WAY YOU WANT THEM TO.

11. SOLIDWORKS
• THIS IS POWER AND USER-FRIENDLY SOFTWARE TO DESIGN 3D
MODEL OF MECHANICAL PARTS AND ASSEMBLY’S , DRAWING TO
MANUFACTURE, ANALYSIS AND SO ON.
• IT INITIAL RELEASE WAS IN 1995
• SOLIDWORKS IS CURRENTLY USED BY OVER 2 MILLION
ENGINEERS AND MORE THAN 1,65000 COMPANIES WORLDWIDE.