New construction

1. RISING DAMPNESS.
STOP WITH LW+ ……

2. 2
In new construction
STOPPING RISING DAMPNESS.

3. 3
 Stopping Rising Dampness,
 Concrete & Mortar Mix.
OBJECTIVE OF THE MEET.

4. 4
RISING DAMPNESS IN NEW & OLD CONSTRUCTION.

5. 5
RISING DAMPNESS IN NEW & OLD CONSTRUCTION.

6. 6
o Porosity in plaster / concrete / mortar can easily show up damp
ness on the substrates.
REASON.

7. 7
•Capillary System in the plaster / concrete induces the rising of t
he water which creates dampness.
ROOT CAUSE – Capillaries in the substrate.
Mortar / Concrete without Integral
Waterproofing Compound
Discontinuity of Pore Tract Ensures No M
oisture Migration Within Concrete Mass

8. 8
OTHER PROBLEMS:
Concrete Dusting Plastic Shrinkage Cracks
Crazing Hairline Cracks

9. 9
Why it happens:
 No control over water cement ratio
 e.g. either less water used while making plaster / concrete makes the mass dry post
curing of plaster and concrete resulting to cracks or dusting.
 Excess water used :
 Excess water used for achieving workability does not guarantee a homogeneous mi
x of cement – sand / aggregates and results into separation of ingredients of plaster
/ concrete (while laying concrete excess water leads to bleeding of cement – water
mix on top of the mass results into dusting in due course of time)
 No control on water cement ratio or less awareness about the role of water in
producing cement – sand plaster.
 Getting quality sand (silt free or less silt free as specified) also, plays vital role i
n producing quality / homogeneous cement sand plaster / mortar.
ROOT CAUSE – Capillaries in the substrate.

10. 10
• If capillary system in the concrete / plaster is broken, that wil
l hinder rising of the water through these capillaries thus will
control dampness.
• Further, these capillaries could be broken by reducing water
part.
Thus:
• Need to use an additives which can improve the workability of cement
sand plaster/mortar by reducing the demand of water & considering t
he sand quality
• This additive improves plaster quality & strength by making it homoge
neous & impermeable.
• Thus solution is “Dr fixit Pidiproof LW+”
SOLUTION.

11. 11
BENEFITS OF USING LW+.
1. Waterproofing Mortar & Concrete
– Reduction in porosity.
2. Resists corrosion which increases li
fe of concrete and mortar
3. Gives good Workability & makes m
ix homogeneous
4. Increases Strength & Durability

12. 12
LAB TEST FOR STOPPING RISING DAMPNESS with LW+
With & without LW+ - Day 1 With & without LW+ - Day 2
• Below concrete blocks indicates how rising dampness gets delayed by adding L
W+

13. 13
PLAY AV.
Play Product AV.
Dr Fixit Pidiproof LW+

14. 14
QUICK REMINDERS

15. 15
DOSAGE:
PIL recommended dosage of LW+ in Cement ?
200 ml in 1 bag of 50 kg Cement

16. 16
RIGHT METHOD OF MIXING LW+
Always mix LW+ in water & never add directly in the mixture.

17. 17
PACK SIZES AVAILABLE
200ml,
1 Ltr,
5 Ltr ,
10 Ltr ,
20 Ltr &
100 Ltr

18. 18
PRESTIGIOUS PROJECTS.

19. 19
Site Details : Atlantis Mall , Ahmedabad Inter Continental Grand: New Delhi
Reserve Bank Office: New Delhi
Site Details : Residential Project , Kerala,
Location: Kalamasseri

20. 20
THANK YOU.