Hussein Mogahed Fawzy Hussein is a senior electronics engineer from Egypt with over 15 years of experience installing, maintaining, and repairing dynamic positioning systems, navigation equipment, communication systems, and other marine electronics as an engineer for Maridive Group on vessels around the world. He has extensive skills and experience working with systems from manufacturers like Kongsberg, Furuno, Raytheon, and others. His duties include technical support, equipment installation, maintenance, troubleshooting, system upgrades, and management of spare parts.

1. 1 of 3
Hussein Mogahed Fawzy Hussein
Senior Electronics Engineer
enghuss2000@hotmail.com
PERSONAL INFORMATION:
Date of Birth: 18 October 1977
Marital Status: Married
Nationality: Egyptian
Military Service: Exempted
Passport No.: A11925279
EDUCATION:
BSc from Alexandria University, Faculty Of Engineering 1995-2000
Electrical Department(Communications & Electronics Section) (Very Good Grade)
EXPERIENCES:
Marine Electronics Service Engineer at Maridive Group (Marine & Oil Service) from
January 2001 – Present in Egypt, Kuwait, Tunis, Qatar, Abu Dhabi, Saudi, Malaysia,
Cameroon, Nigeria, Angola, El Congo, Brazil, China.
COURSES:
Dynamic Positioning Maintenance Course from Kongsberg in Norway
Achievement
Delivering Maridive 603 DP2 as DP man in Guangzhou in China 2014, Performing CAT & FMEA
Test.
Performing and Attending many CAT and FMEA Tests to our Fleet.
Delivering Maridive 7000 Tug boat in China. 2014.
Installing Complete GMDSS in many Vessel.
Performing modification to Inmarsat-C to work with SSAS and LRIT to our all vessel.
Experience Description
As a senior field engineers in Electronics Department serving Maridive Group fleet (PSV, AHTS,
DSV, MPSV, Barges, Tugs) responsible for installing, commissioning, troubleshooting, repairing all
Dynamic Positioning (DP) System, navigation and communication equipments such as VSAT, Radars,
GMDSS, Inmarsat, Gyro Compass, Autopilot, VDR, AIS, Echo Sounders, Speed Log, GPS, EPIRB,
SART and BNWAS.
Contact
Mobile: +2 01003454266 , +2 01066116830 (Viber , whatsApp ,imo)
E-mail : enghuss2000@hotmail.com (LinkedIn) , enghuss2000@gmail.com
SKILLS
Troubleshoot Electric PCBs (especially control and power PCBs) and using test equipment for fault
finding and has a good hand skills for soldering and change defected components.
Complex Systems diagnosis, detect problems and predict reasons.
Reverse engineering (even without service manual).

2. 2 of 3
Duties
o Technical support and advisor for vessel crew (captain, electrician, ETO) as a back office engineer.
o Manage spare parts order, quotation and delivery, Keep in touch with crew as a coordinator
engineer.
o Installing and commissioning new equipment, Upgrade hardware and software of existing
equipment and its interconnection and interfaces.
o Troubleshooting and repairing defected equipments as a maintenance engineer.
o Work in yard workshop testing spare parts and calibrate equipment and store defected as a
workshop engineer (port engineer).
o Following the schedule (routine and preventive maintenance).
o Supervising all modifications, rearrangements in cables and antennas while vessel in shipyard.
Experience Details
Power Equipment
Batteries checking GMDSS and navigation batteries.
Chargers adjusting and monitor chargers.
UPS : installing, repairing, Battery check and change
Dynamic Positioning System KONGSBERG (SDP & K-POS)
DP operating station (DPOS) and Controller (DPC) troubleshooting and maintenance. new
installations, system upgrade, software backup, checking and calibration signals from thruster
driver
DP Reference Systems:
DGPS (models: DPS110, DPS116, DPS132, DPS232) Installing the full system component (like
antenna, console, cables and wiring), Software upgrades and Backups,
Fugro seatar differential correction receiver: (models 3510 and 3610) Installation and software
upgrade for both, Spot beam and INMARSAT based.
Radius and Fan beam: Installations for Radius system units (Interrogator, computer console,
plugs, cables, wiring to the DPC) and for the Fan beam units (Laser unit, Control unit,
connections to DPC). Software faults troubleshooting, system backup.
DP Sensors: (Gyrocompass, Wind sensor and MRU) installation, troubleshooting, software
configuration, data wiring.
Navigation & Communication Equipments
Gyrocompass: Raytheon Anschutz (STD6, STD12, STAR, STD20, STD22) and Sperry (Mk1,
Mk2) Installation, maintenance, and overhauling.
Autopilot: Furuno, Raytheon Anschutz, Sperry Marine. Full installation (controller, processer,
Rudder Feedback Unit, Data connections), Auto pilot tuning. Replacing whole old analog steering
(gyro & Autopilot) with a new full digital system.
Radar: Furuno, Koden.
 GPS: Furuno, Simrad.
Echo sounder and Doppler Speed Log : Furuno ,Skipper, JMC Installation included transducer
fitting in the hull, processor and display..
GMDSS: Furuno and Thrane&Thrane Sailor Installation and maintenance for the full GMDSS
radio station Equipments includes antennas mounting, console build up, coaxial cables, data
wiring. Station commissioning include Inmarsat-C terminal configuration, DSC VHF radios
configuration and tests, MF-HF SSB radio configuration and test, DSC Watch receiver test,
NBDP configuring, SSAS installation, addresses configuration, and test.
NAVTEX (Furuno, JRC, Samyung) installation and servicing.
AIS (Furuno, Samyung) installation, service, configuring and data connections with equipments.

3. 3 of 3
VHF and MF-HF radios servicing and troubleshooting include output power measurements,
detecting and replacing faulty PCBs, antennas and cable check.
FLEET 77, 77+, and Broadband: (Furuno and Thrane&Thrane Sailor) installation, software
configure and data connections, troubleshooting.
BNWAS : (Veinland) installation and test
Languages
 Arabic: mother tongue  English: very good
Computer Skills
Office (Word, Exel ,Powerpoint ) , Matlab , Visual C++, Visual C#