1. CURRICULUM VITAE
PersonalAttributes:
(a) Good communication skills and ability to work as a team.
(b) Excellent interpersonal skills.
(c) Excellent adaptability to multinational environment.
(d) Ability to adapt with wide exposure to various cultures.
(e) Proficient in technical writing skills
Skills:
INDUSTRIAL AUTOMATION:
Major brands of Programmable Logic Controllers, including;
Allen Bradley (AB) PLC SLC 500, Micrologix 1000 with programming software Rslogix500
ABB PLC (Asea Brown Boveri ) model 07CR41 with programming software AC1131 V4.2
Omron PLC Sysmac CPIE with Software – Cx programmer v1.0
Siemens PLC Model S7300. Software Simantic Manager V5.3
Ge-fanuk PLC Series 90 -30, Versamax Nano micro. Software Versapro V2.04
Mitsubishi PLC FX – 64M, GX Developer V8.20
Schneider PLC TWDLCAA24DRF, TWIDO Soft V3.5
Messung PLC and Keyence PLC Model KV24. Software - Ladder Builder V1.5
Delta GSM PLC Model DVP4OEH with software WPLSOFT V2.11.60
TWO MAJOR BRANDS OF SCADA (SUPERVISORY CONTROL AND DATA ACQUISITION):
- INVENSYS: Wonderware Intouch V 9.5.
- GE-FANUC ( GENERAL ELECTRIC ): Intellution Fix 32 V7.0.
DISTRIBUTED CONTROL SYSTEMS (DCS)
HONEYWELL DCS : HC900 C50 Rev.4.4x, Hybrid Control Designer.
MAN MACHINE INTERFACE (MMI) : HCIX-07TW-ND-NC
Communication Protocols : Ethernet, Modbus and Profibus, Foundation fieldbus(FF),
PID CONTROL
ABB DCS : AC 800M, PLC Control Builder
MMI: CP554, CP Programmer V1.0
Communication Protocols : Ethernet, Modbus, OFC and
Profibus.
Emerson DeltaV DCS, SIS/ESD/FGS
PROGRAMMABLE AUTOMATION CONTROLLER (PAC)
HONEYWELL PAC.
- Hardware Configuration.
- I/O Modules, Troubleshooting, I/O wiring.
- Networking Of-Expersion /PAC/C50/HC.
2. Real Time Interfacing :
- Process Control, 2-Axis Motion Control.
YOKOGAWA FIELD INSTRUMENTS:
Good knowledge and understanding of flow, level, pressure and temperature measurement, YTA transmitters, EJX
transmitters, ADMAG flowmeter, controllers and recorders.
INSTRUMENTCALIBRATION: I am Competent in the calibration of Mechanical, Thermal, Volume and mass and
electrical test instruments like RTD, thermocouple, voltmeters, ammeters, multimeters, tachometers,
temperature bath, weighing scales, and standard weights.
PERSONAL DETAILS:
Names: Akpan, Inyang Udofia
Date of Birth: November 11, 1983
Sex: Male
State of Origin: AkwaIbom
Marital Status: Single
Contact Address: No.7 Esa Atan Road Extension
P.O.Box 965, UrukUso,
Ikot Ekpene
Akwa IbomState.
Phone: 08068731517, +91988440220
E-mail: udofialinks@yahoo.com
Nationality: Nigerian.
INSTITUTION ATTENDED WITH DATES:
2015: Yokogawa Technical School, Chennai, India.
2015: Excel Automation Solutions, Chennai, India.
2015: Technocrat Automation Training Institute, Chennai, India.
2010: Nigerian Institute of Safety Professionals
2006-2007: Nigerian Institute of Management
2006-2007: National Youth Service corps, EkitiState
2003-2005: Akanu Ibiam Federal Polytechnic, Unwana, Afikpo, Ebonyi State
1999-2002: Akanu Ibiam Federal Polytechnic, Unwana, Afikpo, EbonyiState
1992-1998: State College, Ikot Ekpene, Akwa IbomState
1998-1999: Urban Commercial School, Ikono, Akwa IbomState
1987-1992: Government School # 1Ikot Ekpene, Akwa IbomState
ACADEMIC QUALIFICATION/CERTIFICATION OBTAINED WITH DATES:
2015: Certificate in Yokogawa field Instrument Training
2015: Certificate on Emerson DeltaV/DCS/SIS/ESD/FGS
2015: Post Graduate Diploma in Industrial Automation
2010: HSE competence Development Course (level 2&3)
2007: Certificate of Proficiency in Management
2007: National Youth Service Corps Certificate
2005: Higher National Diploma in Electrical/ Electronics Engineering
Technology-Electronic & Telecommunications (UPPER CREDIT)
2002: National Diploma in Electrical/ Electronics Engineering
Technology (UPPER CREDIT)
1999: Senior Secondary School Certificate
3. WORKING EXPERIENCE WITH DATES:
1. Company Name: Petrostuff Nig Limited
Department: Operations (ExxonMobil Producing Nig Unlimited Qua Iboe Terminal and offshores
locations, Akwa Ibom State)
Designation: Field Instrument /ICSS Engineer
Duties:
(a) Calibration of Pneumatic and Electronic Instrument Devices using Standard Test Instruments
(b) Installation, configuration and Calibration of Fieldbus/Electronic instruments using HART 475 Protocols/Beamex MC5
Fieldbus Calibrator/Software.
(c) Basic understanding of field instruments and control troubleshooting
(d) Electrical/Instrument hook-up in a Power Control Panel.
(e) Fixing of faults/arranging for replacements to be installed.
(f) Promoting safe behaviour at all times
(g) Carrying out of quality inspections to ascertain timely maintenance.
(h) Finding and fixing of faults and recalibrating of instruments.
(i) Overhauling and replacing parts according to schedule
(j) Involved with the Commissioning team in carrying out of functional loop checks in all field of installed
instruments and devices which are connected to one control system housing ICSS (PCS, PSS, ESD and
F&G) control logic to DCS.
(k) Interpretation of PEFS, P&ID, Loop Drawing
(l) Assists the Commissioning team in troubleshooting of fault signal loops during instrument.
Simulations.
(m) Best understanding and application of MPN/Petrostuff HSE company’s policy and PTW implementation
Period: 2013 to date
2. Company Name: Starry B Nig Ltd, Eket, AkwaIbom State
Department: Project (Security Upgrade Project [SUP] at ExxonMobil Producing Nig Unlimited)
Designation: Electrical/Electronics Engineer
Duties:
(a) Interpretation of electrical drawings/implementation of it in the field.
(b) Laying of armored Power Cables.
(c) Testing of armored cables and optic fiber cables.
(d) Installation of UPS for Security Equipment Panel
(e) Installation of CCTV camera poles/cameras.
(f) Installation/commissioning of New QIT Perimeter Lighting Installation works.
(g) Pulling of Fiber Optic Cable from a location to Central Control Room
Period: 2012 – 2013
3. Company Name: Faithful Fire Protection Ltd, # 66 Trans-Amadi Industrial Layout, Port Harcourt, Rivers
State
Department: Project
Designation: Electrical/Electronics/Fire Engineer
Duties:
(a) Design, installation and maintenance of automated fire detection and alarm systems both addressable and
conventional systems
4. (b) Installation, servicing and maintenance of security safety devices like CCTV, DVR, access controland others.
(c) Installation and programming of fire control panel(FACP)
(d) Routine maintenance and checks of fire alarm systems.
(e) Installation and servicing of initialing devices/notification appliances like heat, smoke, flame and gas
detectors, sounders, speaker and MCPs.
(f) Installation of FM200 suppression, CO2 total flooding and hydrant systems
(g) Installation, servicing and maintenance of sprinkler system, pumps and alarm
(h) Servicing of fire-fighting equipment like extinguishers of various types
(k) Installation, servicing and maintenance of security safety devices like CCTV, DVR, access control and
others.
(l) Installation and programming of fire control panel(FACP)
(m) Routine maintenance and checks of fire alarm systems.
Installation and servicing of initialing devices/notification appliances like heat, smoke, flame and gas
detectors, sounders, speaker and MCPs.
(n) Best understanding and application of HSE company’s policy and PTW implementation
Period: 2010 to 2012
4. Company Name: Grinera Nigeria limited, Old Lagos Express Road, Ogunmakin, Ogun State.
Department: Maintenance
Designation: Electrical-Instrument Technologist
Duties:
(a) Testing, maintenance and troubleshooting of PLC Unit/system.
(b) Testing, Servicing and Maintenance/replacement of electric heaters, Fans, motors, atomizing nozzles,
humidity solenoid and disc replacement.
(c) Repair and maintenance of pneumatic systems and dampers.
(d) Detecting of electrical fault in the Power control room
(e) Good understanding and monitoring/manipulation of (PLCs) controllers
(f) Servicing of Air Compressor unit/ routine checks of Instrument System.
(g) Evaluate, develop and implement appropriate preventative maintenance schedules and predictive
maintenance to minimize impact of failure.
(h) Good understanding and working knowledge of relays, electrical switches, timer, and power back up
systems.
(i) Provide technical analysis and troubleshooting for all electrical facility and instrumentation systems.
(j) Calibration and certification of temperature and humidity devices.
(k) Reading of P &ID,PEFS and Electrical schematic/line diagram.
(l) Maintenance and servicing of Generator, Electric Motors.
(m)General servicing of Electrical, Instrument and Control devices at the process plant.
(n) Best understanding and application of HSE and PTW implementation.
(o) Carrying out of Isolation of LV system prior to maintenance.
(p) Function Testing and Calibration of Fire and Gas/other safety devices
Period: 2010 – 2012
5. Company Name: Routine Engineering Limited, Port Harcourt.
Department: Maintenance
Designation: Electrical/Instrument Engineer
Duties:
(a) Testing, Servicing and maintenance of Electrical/Electronics Power Systems
(b) Testing and maintenance of Electrical equipment line Motors, generator etc.
(c) Working knowledge and understanding of Relays, Electrical switches,Timer, and Power back up system (UPS).
(d) Electrical/Instrument hook-up in a Power Control Panel.
5. (e) Take preventive Measures to minimize the impact of system failures
(f) Updating production equipment and Maintenance documentation.
(g) General safety meetings, Job Safety plans and procedures JSA, Tool box talk and PTW safety implementation
system.
(h) Best HSE understanding and work practices.
(i) Computer knowledge and software Application.
(j) Calibration of Pneumatic and Electronic Instrument Devices using Standard Test Instruments.
(k) General understanding of Control instruments and maintenance procedures
(l) Basic understanding of field instruments and control troubleshooting.
Period: 2007 to 2008
6. Company Name: Ekiti State Electricity board, Ado-Ekiti, EkitiState.
Department: Engineering
Designation: Electrical Engineer (NYSC
Duties:
(a) (a) Installation and mounting of an Electric Pole.
(b) Building of Power/MCC substation.
(c) Installation of fuse, bus system (feeder panel), insulators and cross bars in an electric pole.
(d) Glanding and termination of an Electric cables.
(e) Installation of electric motors.
(f) Carrying out of routine and non-routine checks in the field.
(g) Assists in monitoring of parameters in the power control room.
Period: 2006 - 2007
7. Company Name: Nigerian Telecommunication Limited, IkotEkpene, AkwaIbomState.
Department: MDF Unit, Exchange section, Customary Section, Radio/Power Control Room
Duties:
(a) Installation of new lines at the MDF
(b) Detecting and pecking of faulty lines
(c) Checking of consumer fuses at the MDF and giving of new fuse pair for tone during installation.
(d) Replacement of the blown fuse element, at the exchange/MDF Unit.
(e) Detecting and trouble shooting of faulty consumers line at the IDF (cabinet), DPs.
(f) Termination of Consumers line.
(g) Working and communicating with the earth Station at Enugu during fault diagnosing, and detection.
Period: 2002 to 2003
PROFESSIONAL MEMBERSHIP:
Student Member: Nigerian Society of Engineer (NSE)
Member Nigerian Institute of Management (MNIM)
NYSC Cadre Member Federal Road Safety Commission.
Nigeria Institute of Safety professionals (NISP)
HOBBIES: Reading, Traveling, Football, Lawn Tennis, Watching Movies
IT PROFICIENCY Microsoft Word, PowerPoint, and Excel,
AutoCAD 2&3D, RSLOGIX 500. AC1131V4.2. CX
PROGRAMMER,SIMANTIC MANAGER,VERSAPRO V2.04,GX DEVELOPER V8.2,
TWIDO SOFT V3.5, LADDER BUILDER V1.5,WPSOFT V2.110 / V2.3.
