#COurse project

1. Topic
Electronic Controlled Boat
Hassan Nawazish
DIY Space,Lahore

2. ABSTRACT
The purpose of making this Boat
is to check and analyze the
working of radio modules
(XBEE’S).So,I shall tell you how to
control boat via XBEE’S.

3. Table of contents:-
• 1.1 Coding.
• 1.2 Equipments.
• 1.3 Fritzing.
• 1.4 Proteus Simulation.
• 1.5 Configuration of XBEE’s.
• 1.6 Boat making.
• 1.7 Applications.
• 1.8 Recommendations.

4. Coding
• Idea.
• Arduino(IDE).

5. Equipments:-
• Water proof
Ultrasonic Sensor.
• Arduino Mega.
• Servo Motor.
• DC Motors.
• XBEE radios.
• Transistor.
• Rechargable Battery.
• LED.
• XBEE Adapter.
• Wires.
• Resistance.
• Polystyrene.
• Gum machine.
• Wiro board.
• Cutter.

6. Fritzing:-

7. Simulation:-

8. XBEE’s Configuration:-
*Purpose of Configuration.
* XCTU/Putty.
*Recommendations.
Transmitter XBEE
• ID 414F9285
• PANID 1234
• DL 0
Reciever XBEE
• ID 415B6899
• PANID 1234
• DL FFFF

9. Applications:-
• Measurement of depth.
• Detection.
• PH of water.
• Live Streaming.
• SPY.

10. Recommendations:-
• Use High power equipments and
Polystyrene, and make a big boat.
• Use XBEE-PRO.
• Use IC and make PCB.
• Make controller.
• Use Ducted fans.
• Use GPS tracker.