SOLAR PUMPS FOR IRRIGATION ◊ Feature 1. Energy-saving and environment-protected green products: Compared with the traditional altermation current machine,the efficiency is improved 25% by the permanent magnetism,direct current,brushless,non-sensor motor. 2. Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved. 3. High technique products adopting MPPT and DSP chip technique. 4. 100% copper wire, cold-rolled silicon steel sheet 5. Stainless steel 304 shaft , motor body, screw 6. Natural rubber of Sealing and rubber stator

1. GREENMAX TECHNOLOGY
Plot No. 8, Amaltas Colony, Chunabhatti,
Bhopal 462012
Website :www.solarpumpindia.net/
Email: sales02@greenmaxtechnology.co.in

2. PRESENTATION OF GREENMAX
0.5HP SOLAR WATER PUMP
COMPONANT OF SOLAR PUMP
• SOLAR PANEL 500w (24v 250w x 2pcs)
• 0.5HP DC Solar Pump 1 Set
• 0.5HP MPPT Controller 24v 1 Set
• MS Structure for 2 Panels
• Cable 2.5mm (as per requirement)
• HDPE PIPE 0.75 Inch

3. DETAILS OF 0.5 HP SOLAR PUMP
1. Solar Module
2. Structure of Panel
3. Motor Pump
4. MPPT Controller
5. Cable
6. HDPE Pipe
7. Installation

4. SOLAR PV MODULE
SPECIFICATION
Maximum Power - 300w
Brand - Greenmax
Cell Type mm - Polycrystalline
solar cell 156*156
Number of Cell - 72(6*12)
Manufacture Site - India
Open Circuit Voltage - 44v
Maximum Power Voltage (Vmp) - 36v
Short Circuit Current (Isc) - 8.235A
Optimum Operating Current - 8.20A
Power Tolerance - 0 +5w
Module Efficiency - 15.5%
Dimensions - 1677*1002*42
Weight - 20.21
Back sheet - Composite film
Frame Colour - Silver Anodized
Frame - Aluminium Alloy

5. Our Company Tie-up with Solar Panel
Manufacture Company, These are All
MNRE Approved and CE Certified
Companies
• WAREE ENERGY – MUMBAI –
200MW PLANT CAPACITY
• VIKRAM SOLAR – KOLKATTA –
100MW PLANT CAPACITY

6. STRUCTURE OF PANELS

7. CONNECTION OF PANEL

8. SOLAR PUMP SPECIFICATION
MATERIAL SPECIFICATION
Wiring - (1) Copper Wire (2) Automatic Machine
Wiring
Shaft - Stainless Steel 304 shaft
Impeller - Stainless Steel 304
Bearing - NSK
Motor - Permanent magnetism, Three Phase
Outlet - Stainless Steel 304
Screw & Nut - Stainless Steel 304
Name Plate - Laser Marking
Rotor & Stator - Double Plastic Package , Motor Insulation
Efficiency - Improved 25% Then the Traditional
Alteration Current Motor
Software Start-up System - The Motor Start Up Placidly and
the Current is far Less Then Traditional Hardware Start up
technology
Warranty - 1 Year

9. FLOW CHART 0.5HP PUMP

10. FLOW CHART OF 0.5HP PUMP

12. INSTALLATION AND MAIN POWER