1. GANESH KUMAR.S
+91-9600744344
ganesh.mechner@gmail.com
# 226 Millennium Colony, ICF Colony, Athipet, Ambattur, Chennai-58
CAREER OBJECTIVE
“To inculcate dedication and commitment to the work assigned to me, which can enhance the benefit for both
the concern as well as me”.
CAREER EXPERIENCE
B.E Mechanical Engineering with 3years of Professional Experience as a R&D
-Development Engineer in Medical Product Design and Development.
Organization (Present) : AKAS MEDICAL EQUIPMENT
(Manufactures of Syringe Pumps, Infusion Pumps, Patient Monitors, Oxygen Concentrator etc...)
Designation : In charge –R&D Mechanical Development
Keys & Responsibilities :
· Creation of Concept design for Syringe Pumps, Infusion Pumps and Patient Monitors
· Verification of Design for Manufacturing Feasibility (Plastic Injection Molding items,
PDC items)
· Material Selection for Plastic Items, Machining Items.
· Design Optimization done by eliminating sheet metal and replacing with plastic material
for cost reduction.
· Preparing PPC for Mechanical Development for every project.
· Target Estimation for overall Project Which Involves Mechanical Items and submitting
same to CEO approval
· Requesting for RFQ from suppliers
· Frequent visit and follow up the vendor to reach as per planned Target.
· Receiving samples from suppliers and Verifying with help of Quality Team
· Auditing the report for the inspected samples from quality Team
· Prototype Building from received samples.
· Products samples received from prototype will be moved quality for inspection.
· Problem identification in the product samples and Proceeding design modification if
needed as well for production also.
· Quality improvement process for the design as well as supplier process.
· Circulation of Production Control plan and Material Control Plan for shop floor.
· Documenting the product from development stage to obsolete stage with the help of
Arena PLM software
Experience : October 2011 to Present date
1 | P a g e
2. PROJECTS HANDLED
Project Title 1 : Syringe Pumps (AKAS Terumax, AKAS PEDIAMAX)
Syringe pump is mainly used for drug delivery systems in general, Cancer, Critical Care and
Neonatal infusion where accuracy is important.
Project Details :
· Development of Pump assembly as per the design .
· Functional wise creating Sub assemblies which results towards Product integration.
· Circulation of Production Control plan and Material Control Plan for shop floor.
· Development of AKAS PEDIAMAX Full Product as per the design with support of my sub
ordinates
· Documenting the product from development stage to obsolete stage with the help of Arena PLM
Software.
· Design Optimization done by eliminating sheet metal (Pumpbody) and replacing with plastic
material for cost reduction.
Project Title 2 : Infusion Pumps (AKAS Infumax, AKAS IP700)
Infusion pump is mainly used for saline delivery systems in general, Critical Care and Neonatal infusion where
accuracy is important.
Project Details:
· Design and development of free flow lever mechanism .
· Development of IP 700 Full Product as per the design with support of my sub ordinates
· Design Optimization done by eliminating sheet metal (Side Plate & Rear Panel) and replacing
with plastic material for cost reduction Functional wise creating Sub assemblies which
results towards Product integration.
· Circulation of Production Control plan and Material Control Plan for shop floor.
PROJECTS HANDLING
1) Patient Monitors (AKAS UNOMAX, AKAS DUOMAX)
Patient monitoring systems are to display the spo2, heart rate and Blood pressure.
.
2) Infusion Controllers (AKAS IPC)
IPC is mainly used for saline delivery systems in general, Critical Care and Neonatal infusion where accuracy is
important which operated by gravity force.
EDUCATIONAL PROFILE
MBA-LOGISTICS & SUPPLY CHAIN MANAGEMENT (Part Time- Pursuing)
From University of Madras (From 2013).
B.E MECHANICAL ENGINEERING (2007-2011)
From V.L.B Janakiammal College of Engineering & Technology, Anna University, Coimbatore with
aggregate 8.74 CGPA(82%).
HIGHER SECONDARY SCHOOLING (2005-2007)
2 | P a g e
3. From Board of Higher Secondary Education, Tamilnadu with aggregate 85.6% from Kamaraj Higher
Secondary School ,Nambiyur.
SECONDARY SCHOOLING (2004-2005)
From Board of Secondary Education, Tamilnadu with aggregate 73.8% from. Government Higher Secondary
School Malayapalayam.
ENGINEERING TOOLS:
FMEA (Failure Modes & Effects Analysis)
ISO
APQP
8D Problem Solving
CAD TOOLS
AutoCAD, Pro-E & Creo 2.
ARENA – PLM Software
PERSONAL SKILLS
Believing Myself with Confidence.
My Perfection is my positive attitude.
Willing to add technical skills to my Experience.
EXTRA MILES & RECOGNITIONS:
Awarded RAJYA PURASKAR in “The Bharat Scouts & Guides” - 2005
Joint Secretary – The Institute of Engineers ( Student Chapter) - 2010-2011
PERSONAL INFORMATION
Father’s Name : Ganesh Kumar.S
Date of Birth : 17/06/1990
Age : 24
Marital status : Single
Nationality : Indian
Languages known : English, Tamil
REFERENCES
Mr.Ananthu. K Mr.Govindraj
Branch Manager Manager – Operations Pumps
DesignTech Systems Ltd, Chennai Akas Medical Equipment, Chennai
ananthu.k@designtechsys.com govind@akasmedical.com
+91 9940431714 +91 9345979116
I do hereby confirm that the information given above is true to the best of my knowledge.
3 | P a g e
