1. D'MAND CIRC® SPECIFICATIONS
Pump Dimensions & Weights
Ship Wt. - 12.0 lbs.
D'MAND® Sensor
Extremely Wide Operating Range:
• Positive stop essentially eliminates fatigue effects of turbulence, vibration,
and flow surge on flow detecting element
• Very low pressure drop-typically less than 1.0 psi at normal flow rate
• Line pressure to 250 psig
• Temperature to 200°F continuous
• Flow Range Water Calibrated @ 70°F
Nominal Working Temperature/Pressure
200°F @ ambient pressure
250 PSI @ room temperature
Temperature Sensor
• RESISTANCE @ +25°C = 10,000 Ω +/- 1%
• RESISTANCE/TEMPERATURE CURVE = "J"
0.177'' 0.787'' ± 0.050'' 96.0 '' ± 4.00''
• TEMPERATURE COEFFICIENT ± 0.015''
@ +25°C = -4.4%/°C NOMINAL
• BETA "ß" (0 to +50°C) = 3,892°K NOMINAL
0.164''
• MAXIMUM TEMPERATURE RATING = +105°C ± 0.015''
• LEAD WIRE: 24 AWG, STRANDED CONDUCTOR,
TWO CONDUCTOR, PVC INSULATED ZIPCORD
0.205''
NOMIAL RADIUS STRIP
THERMISTOR ELEMENT POTTED 0.157''
IN PHOSHORUS DEOXIDIZED COPPER ±0.060''
PROBE HOUSING
Enovative Group, Inc. 242 Hampton Drive, Venice, CA 90291 866. 495.2734 www.enovativegroup.com
Features Material of Construction Performance Data
Exclusive ACB Anti-Condensate Baffle with Ambient
Air Flow-Protects Motor Windings against Condensate
Buildup
Casing (Volute): Bronze Flow Range: 0 – 28 GPM
High Velocity Performance-Compact Design Stator Housing: Aluminum Head Range: 0 – 30 Feet
Quiet, Efficient Operation Cartridge: Stainless Steel Minimum Fluid
Temperature: 40˚F (4˚C)
Direct Drive-Low Power Consumption Impeller: Non-Metallic Maximum Fluid
Temperature: 230°F
(110˚C)
Unique Replaceable Cartridge Design-Field Serviceable Shaft: Ceramic Maximum Working
Pressure: 125 psi
Self Lubricating Bearings: Carbon Connection Sizes: 3/4”,
1”, 1-1/4”, 1-1/2” Flanged
No Mechanical Seal O-Ring & Gaskets: EPDM
Unmatched Reliability-Maintenance Free
Universal Flange to Flange Dimensions
Cast Iron or Bronze Construction
Volts Hz Ph Amps RPM HP
115 60 1 1.76 3250 1/8
Motor Type: Permanent Split Capacitor, Impedance Protected