Hexagonal Boron Nitride Aerosol Spray offers convenient way to apply thin film of coating on any surface as well as in hard to reach places. it spray is high temperature, anti-stick release agent & lubricant. Features: •Bonds well with substrates and forms a coating film •Excellent lubricating properties •Good chemical inertness •Electrical insulator •Thermal conductor (result: better heat dissipation) •High temperature stability (1000 deg C in air, 1400 deg C in vacuum & 1800 deg C in inert gas) •Low thermal expansion •Low dielectric constant •Non-wetting •Contains no fluorocarbons or lead •Not harmful to Ozone Applications: •Welding & Brazing: Protects from weld spatter •Sintering: Eliminates sticking & carbon contamination •Plastic & Rubber Molds: For release •Glass making: Improves mold/die life •Molten metal processing & metal forming: Inhibits corrosion •Casting, extrusion, forging & stamping •High temperature protective release coatings

1. By Innovative Growth Enterprises, Ludhiana Mob: 9910899409

2. Extrusion process involves preheated cylindrical aluminum billet,
pressed through a steel die with a pressing ram (also called, the
dummy block).
At temperatures above 450°C aluminum tends to stick to steel, common c
hallenges are sticking of the billet to dummy head and sealing of dummy
head against the die /container.
To avoid rejects due to blistering and uneven surface profile caused by
these issues, each extrusion cycle must end with the dummy block
separating quickly and effortlessly from the billet.
Challenges in Aluminum Extrusion Process

3. Challenges withTraditional
Release Agents Lubricants

4. Messy and need repeated application in every press cycle.
Flammable nature at high temperatures may cause
blisters and holes in aluminum profiles.
Graphite Lubricants can cause short‐circuits
in electrical equipment.
Graphite Suspensions

5. Acetylene Gas is
Carcinogenic
Requires Precaution in
Storage and Handling
Cause Black Marks on Profiles
that Interferes with Anodizing

6. White, clean appearance
Minimizes surface defects , Boron Nitride does not
leave , or leaves non visible marks on profile
Low coefficient of friction, soft, lubricious and
non‐abrading even at higher temperatures

7. Improves Die Life
Inert, non‐flammable, non‐toxic , safe to store and handle
Electrically insulating ‐ reduces risks of short‐circuit

8.  The Ceramics division of GE Advanced Materials (now Momentive
Performance) has introduced a new grade of its boron nitride (BN)
spray coating, which eliminates the use of methylene chloride. *GE's
Boron Nitride (BN) Spray II is an excellent candidate for use as a
release agent and lubricant in a wide range of applications,
including metal forming, glassmaking, plastics molding, high-
temperature sintering, and welding and brazing. The new spray
coating contains a high-purity, high-crystalline grade of BN that
imparts superior lubrication properties. It is offered in an aerosol
package for easier application.
*This spray coating now comes as Momentive Boron Nitride Spray

9. This spray now comes as Momentive Boron Nitride Spray

10. Innovative Growth Enterprises
67 Industrial Area ‘A’
Ludhiana-141003
Punjab
Mail id
innovative_growth@yahoo.co.in
Devinderjeet Singh
Mob:9910899409