14. Right after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
15. Right after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
16. 5 minutes after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
17. 5 minutes after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
18. 30 minutes after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
19. 30 minutes after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
20. 1 hour after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
21. 1 hour after bath sonication
BN UK 5
Heptane
BPO
BN UK 5
Heptane
BN UK 10
Heptane
BPO
BN UK 10
Heptane
22. Thin film
I tried to make the thin film using the same
procedure from Steve, but this time I did not
dilute the PVDF solution. The thin film came out
better, thicker, and stronger; however, the thin
film shrinked. I was able to measure the
conductivity of the thin film, and it was about
5.6-7.8 MΩ.
23. Thin film
- 6 mg of G3243
- 5 mL of Heptane
- 5 mL of water
- used around 2 mL of PVDF
24. Future work
I’m going to try casting different concentration
of the PVDF on the thin film. The thin film I
made the first time was too thin, and the
second time was thick but it shrinked. I think It
will be better if I try to dilute a different amount
of PVDF in DMAC.