1. CHIRAG GANDHI
https://www.linkedin.com/in/chirag-gandhi-1b7b7abb
950, University Club, West, Apt#002 +1 313-333-9650
Forest Avenue, Detroit, Michigan 48201 chirag94@wayne.edu
OBJECTIVE:
Seeking summer2019 internships in Electric Vehicle/Mechanical Engineering. Expertise in
working in plastic injection molding industry in engineering development.
EDUCATION:
Master of Science Electric Drive Vehicle engineering GPA:3.67
Wayne State University May2018-Aug2020(expected)
Bachelor of Engineering Mechanical Engineering Equivalent GPA: 3.0
SKN COE, Pune University Aug2012-May 2016
Relevant Coursework: Modeling and Controls of Dynamic Systems, Smart Sensor Technology-
MEMS Fabrication and Characterization, Numerical Methods(MATLAB), Manufacturing
Process, Engineering CAD/CAM, Finite Element Analysis.
WORK EXPERIENCE:
Graduate Engineering Trainee, Design and Development, Supreme Industries Ltd
Automotive Plastic Interior and Exterior (July 2016- May2017)
Feasibly study of component for tooling and manufacturing feasibility in NX Graphics.
Study of Layout drawings and doing balooning of drawings required for inspection.
Development of packaging for different component variants.
Development of cooling fixture.
Interaction with customer for timeline, requirements and other engineering issues
Coordinating with vendors for different tooling trials for meeting customer requirements.
Research Intern, Material Science Lab, Research Technology and Innovation Center,
Thermax Ltd (August 2015- June2016)
Development of prototype that can validate the results such that the product can be used
in new commercial product as an energy source.
Testing and validating the results experimentally, analytically and through software for
the new prototype developed and reduced the error to 15.45% keeping the future scope
for development.
2. CHIRAG GANDHI
https://www.linkedin.com/in/chirag-gandhi-1b7b7abb
950, University Club, West, Apt#002 +1 313-333-9650
Forest Avenue, Detroit, Michigan 48201 chirag94@wayne.edu
GRADUATE ASSISTANTSHIPS:
Volunteer Research Assistant, Microfluidics and Bio-instrumentation Laboratory, Wayne
State University May 2018- Present
Conducting experiment using tools like photo-detector sensor, Phantom Camera,
Microscope, pressure regulator, Oscilloscope, DAQ.
Design of Micro-fluid chips in Auto-CAD.
Learning to resolve Troubleshooting problems of various devices.
Carrying out analysis of the prototype developed for running the experiment in COMSOL
Multiphysics.
Learning the fabrication of lab on chips.
PROJECTS:
Accelerometer Sensor for Lift hood System in Automotive, Wayne State University
May 2018- August 2018
Review of different research papers to understand the role of MEMS accelerometer in lift
hood system.
Designing of the prototype in L-edit as per the mathematical calculations in MATLAB.
Analyzing the design using Electromechanical Multiphysics in COMSOL.
Designing of the electrical circuit to run the device.
Fabrication of the MEMS device in nanofabrication lab.
Experimenting with the fabricated device using oscilloscope, digital multimeter and
comparing with the software results.
Satisfactory results obtained.
3. CHIRAG GANDHI
https://www.linkedin.com/in/chirag-gandhi-1b7b7abb
950, University Club, West, Apt#002 +1 313-333-9650
Forest Avenue, Detroit, Michigan 48201 chirag94@wayne.edu
Calorimeter prototype for Cold Fusion Process, RTIC- Thermax Ltd
August 2015- June 2016
Implementing of software’s like Creo and Ansys fluent for designing and analysis of
prototype.
Experimenting with materials like POP and other compound in different proportion for
reactor to sustain high temperature.
Experimental tests of actual prototype using data logger for comparing the results with
the software designed prototype to cross check the analysis.
Implementation of mathematical analysis using key software’s like Microsoft excel to
minimize the error and thus decide the efficiency of the designed prototype.
SKILLS:
Software skills: AutoCAD, COMSOL, Ansys Workbench, Ansys fluent(Basic),
Hyper mesh(Basic), Ls Dyna(basic), Catia V5R21(institutional level).
Programming skills: MATLAB(Numerical)
CO-CURRICULAR ACTIVITIES:
Leadership Experience:
Volunteer, Mechanical engineering Student Association, SKN COE, Pune, India
June 2015- August 2016
Organized different competitions for students during technical fest in Sinhagad
Karandak.
Streamlined organizational structure to improve involvement of students.