1. Charles J. Jackson Project Gallery: Thinking Inside The Box
Here are a few projects from my tenure at DAC International, a prefabricator of wood frame buildings
and building material consolidator for both domestic and International markets. All of these projects
used prefabricated components whose size was constrained by the 2.35m x 2.7m x 12m (7’-8” x 8’-10” x
39’-3”) size of the shipping container used to deliver them to site.
Charles Jackson
cjackcan@gmail.com
2. Project Gallery: Charles J. Jackson Page 2
Custom Home: Chester Street, Nantucket, Nantucket, Massachusetts, USA
Design: Lyman Perry Architects
Site Management: J. Cabral Carpentry
While the foundation is being installed, trucks are loaded in Ottawa with prefabricated components to achieve Just-In-
Time delivery to site.
Supplied prefabricated foundation system, insulated wall panels, pre-cut floors and roofs, exterior windows and doors,
prefabricated window surrounds, exterior finishes (wall and roof shingles and trims).
3. Project Gallery: Charles J. Jackson Page 3
Custom Home Development: Easton, Maryland, USA
Client: Ilex Construction
Design: Lyman Perry Architects
Builder: Ilex Construction
Site Erection: Ilex Construction
Energy Modeling and Ventilation Design: Energy Building Group Ltd
Multiple units for Leeward development
Supplied prefabricated panels, pre-cut floors and roofs, exterior finish and trim package, prefabricated hardwood stairs,
railings, exterior windows and doors, interior doors
4. Project Gallery: Charles J. Jackson Page 4
Custom Home: Nantucket, Massachusetts, USA
Client: Shay Construction
Design: Lyman Perry Architects
Builder: Shay Construction
Supplied prefabricated panels, pre-cut floors and roofs, windows and interior doors
5. Project Gallery: Charles J. Jackson Page 5
Custom Home: Maidenhayes, Devon, UK
Client: Doug and Sarah Stewart
UK Builder: DGS Construction
UK Structural Design: Concept Timber
UK Air Tightness Testing: Wave Heat Recovery
UK Ventilation Contractor: Denmark DE
Energy Modeling and Ventilation Design: Energy Building Group Ltd
This home was featured in the UK SelfBuild Magazine as an example of leading edge green construction. It was the first
DGS Super E house from DAC.
Supplied insulated wall panels, pre-cut floors and roof, prefabricated glue laminated beams and columns, pre-finished and
pre-fabricated porch and overhang rafters and beams, Pre-finished exterior wood siding and trim package, prefabricated
hardwood stair, exterior windows and doors, interior doors, installation of ventilation system and Super E certification.
6. Project Gallery: Charles J. Jackson Page 6
Multiunit Infill: Pinks Lane, Basingstoke, UK
Client: Southern Housing Association
General Contractor: Exbury Homes
UK Structural Design: Calford Seadon
Site Erection: Benfield ATT
UK Air Tightness Testing: Wave Heat Recovery
UK Ventilation Contractor: Wave Heat Recovery
Energy Modeling and Ventilation Design: Energy Building Group Ltd
Supplied insulated wall panels, pre-cut floor, roof trusses, exterior windows, site erection, installation of ventilation
system, air tightness testing, commissioning of ventilation system and Super E Certification.
7. Project Gallery: Charles J. Jackson Page 7
Row House: Hillside, London, UK
Client: Southern Housing Association
Builder: Countryside Properties in Trust
UK Structural Design: Calford Seadon
Site Erection: Crendon Timber Engineering
UK Air Tightness Testing: Wave Heat Recovery
UK Ventilation Contractor: Wave Heat Recovery
Energy Modeling and Ventilation Design: Energy Building Group Ltd
Complex structure resolved from Masonry to Wood Frame. Supplied prefabricated wall panels, pre-cut floor and roof,
exterior windows and doors, ventilation system, site erection, installation of windows and ventilation system, thermal and
acoustic insulation, roof felt, air sealing, air tightness testing, ventilation system commissioning and Super E certification.