Newt191 final class project, about networking and security.

1. AT HOME IOT
CONNECTION
Setting up a SOHO
system

2. Introduction
IoT is very prevalent today and
connecting all the parts of that
system securely is paramount!
Either in industry or at home.
This Photo by Unknown Author is licensed under CC BY-SA-NC

3. Contents
System type Connection Testing the
connections
Subnetting and testing
the connection
Security

4. System
The system that we will discuss will be
a home system. This can consist of
something as simple as a computer and
TV, or as complicated as an entire smart
home. The system we will discuss will
include 3 laptops, 1 gaming system, and
a home security system.

5. Connections
Since we will have 3 distinct types of devices, we will
need a way to allow each one to access the internet
separately.
There are a few ways to do this. We can add a separate
connection for each through our ISP. We can create a
guest network using the current router. We can add a
separate router for each connection. Lastly there is
software that can do this for us.

6. Connection
Since this will be a small
network, we really don’t need
the expense of an extra router
or even software to help us.
The best idea would be to
create a guest network using
the present router which is
simply done.

7. Subnetting
In this case we will not need subnetting.
Unfortunately, we can not use subnetting as it was
meant to be used with an at home router. We would
need an enterprise router. The idea of subnetting is
to use a subnet mask (255.255.255.0/24) and
change it to (255.255.255.128/25) that way we can
create two subnets from the first number of the last
octet. From there we could create 2 subnets on that
mask and then we could break down to another
subnet for the third.

8. TESTING THE
CONNECTIONS
Once we finally get the setting established
its time to test the connections.

9. Pinging the
address
Once the addresses have been set
we need to test the connection.
One of the best ways to test this is
to use ping command. This will let
us know if the connection is good
or not.

10. Security
Some simple yet effective things we can do to
secure our system are
1. Change the default password on everything!
2. Use dynamic addressing where possible.
3. Use WPA2-PSK and AES encryption where you
can.

11. Challenges and Take aways
Some of the bigger challenges for me would be using the sub -netting
and setting up the security. The main issue is to make some
mistakes so that I can learn. I must dig into these issues to truly
understand them. When dealing with a job that can be somewhat
problematic. I can do it I just need to be able to make mistakes in
order to learn. There aint nothing to it but to do it, over and over
again.