Triblue Produced Water Treatment System
•
0 likes•94 views
The TriBlue produced water treatment system enables operators to convert produced/frac water into fresh water.
Report
Share
Report
Share
Download to read offline
Recommended
Water-Management_May-2015-Article in Northeast O&G Marketplace
Produced water from oil and gas extraction poses a major waste challenge for the industry. It can cost up to 300 times more to clean produced water than municipal water. A multi-step treatment process using WellREADY chemicals, IGF separation, and AVARA distillation provides an economical solution. This integrated system cleans produced water and yields distilled water and concentrated brine that can be reused in oilfield operations. The system is capable of treating 1500 barrels of water per day while producing over 1000 barrels of clean water.
AQUAECO-SRORS Brochure
The document describes Aquaeco-SRORS, a patented technology that removes suspended solids and recovers residual oil from palm oil mill raw sludge. It consists of Aquaeco reactors, a three-phase decanter, and tanks. The raw sludge is separated into filtrate with negligible oil and solids, and concentrated slurry containing all the oil and solids. The slurry is further processed to separate oil, which is CPO, from solids. The filtrate can be discharged to effluent ponds with only 30% of the original COD-BOD. This technology generates revenue by recovering oil, prevents pond sludging, and allows mills to comply with regulations on efflu
Current status of fuel technology
The document discusses various technologies for reducing emissions from ship engines, including those that reduce NOx and SOx emissions. It discusses methods such as humid air injection, exhaust gas recirculation, water injection, and selective catalytic reduction to reduce NOx. It discusses using low-sulfur fuels and exhaust gas scrubbers to reduce SOx. It also discusses liquefied natural gas carriers and technologies for reliquefying boil-off gas, including multi-stage compression and closed-loop nitrogen cycles to efficiently re-liquefy gas.
Reverse Osmosis Sea water Desalination System Presentation - Genesis Water Te...
This document describes GWT's sea water desalination systems. The systems utilize reverse osmosis membrane technology to remove salt and minerals from sea water, producing potable water. The systems are designed for various applications and can treat sea water with total dissolved solids levels up to 45,000 ppm. Key features include advanced energy recovery, nano-composite membranes, and filtration to optimize water quality while reducing costs. GWT systems provide sustainable desalination with lower capital and operating expenses.
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...IndiaMART InterMESH Limited
Started to create milestones, we, SPEC Engineers & Consultants Pvt. Ltd marked our presence in the year 1994 and operate in the manufacturing/servicing of Vegetable Oil Plants since 21 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Vegetable Oil Plants, Vegetable Oil Plants, Oleo Chemical Industry Vegetable Oil Plants, Industrial Vegetable Oil Plants, Batch Neutralizing and Bleaching Machines, Continuous Bleaching Oil Machinery, Continuous Physical Refining Machines, Continuous Chemical Refining Machines, Hydrogenation Plants has deepened our roots in the market. We, SPEC Engineers & Consultants Pvt. Ltd breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.Isomalk - 4
Isomalk-4 is a low-temperature process for isomerizing C7 paraffins in naphtha streams. It allows refiners to maximize the value of naphtha by improving yields, octane ratings, and reducing benzene and aromatics formation compared to conventional processing. The process splits naphtha into three streams, sending light C7 to another unit and the C7 mid-cut to the Isomalk-4 unit to produce high-octane products. This results in over 90% liquid yield meeting gasoline specifications with less than 0.6% benzene.
Freytech Eco Line A
The ecoLine-a is an above ground oil water separator that provides highly efficient and cost effective separation of oil from water. It has low maintenance costs, ranging from 30-50% lower than conventional separators. The ecoLine-a exceeds strict European performance standards and can treat wastewater from small facilities in a cost saving way compared to below ground separators.
Presentation W NarrationSidel SRU Flue Gas Condenser
Sidel Systems designs and installs high efficiency hot water heating systems and flue gas condensers to significantly increase boiler efficiency. Their flue gas condenser, the Sidel SRU, typically increases boiler efficiency to 90-95% by transferring heat from the flue gases to the boiler feed water through an aluminum and stainless steel tube design. This can result in substantial fuel savings that often pay back the installation costs within two years or less.
Recommended
Water-Management_May-2015-Article in Northeast O&G Marketplace
Produced water from oil and gas extraction poses a major waste challenge for the industry. It can cost up to 300 times more to clean produced water than municipal water. A multi-step treatment process using WellREADY chemicals, IGF separation, and AVARA distillation provides an economical solution. This integrated system cleans produced water and yields distilled water and concentrated brine that can be reused in oilfield operations. The system is capable of treating 1500 barrels of water per day while producing over 1000 barrels of clean water.
AQUAECO-SRORS Brochure
The document describes Aquaeco-SRORS, a patented technology that removes suspended solids and recovers residual oil from palm oil mill raw sludge. It consists of Aquaeco reactors, a three-phase decanter, and tanks. The raw sludge is separated into filtrate with negligible oil and solids, and concentrated slurry containing all the oil and solids. The slurry is further processed to separate oil, which is CPO, from solids. The filtrate can be discharged to effluent ponds with only 30% of the original COD-BOD. This technology generates revenue by recovering oil, prevents pond sludging, and allows mills to comply with regulations on efflu
Current status of fuel technology
The document discusses various technologies for reducing emissions from ship engines, including those that reduce NOx and SOx emissions. It discusses methods such as humid air injection, exhaust gas recirculation, water injection, and selective catalytic reduction to reduce NOx. It discusses using low-sulfur fuels and exhaust gas scrubbers to reduce SOx. It also discusses liquefied natural gas carriers and technologies for reliquefying boil-off gas, including multi-stage compression and closed-loop nitrogen cycles to efficiently re-liquefy gas.
Reverse Osmosis Sea water Desalination System Presentation - Genesis Water Te...
This document describes GWT's sea water desalination systems. The systems utilize reverse osmosis membrane technology to remove salt and minerals from sea water, producing potable water. The systems are designed for various applications and can treat sea water with total dissolved solids levels up to 45,000 ppm. Key features include advanced energy recovery, nano-composite membranes, and filtration to optimize water quality while reducing costs. GWT systems provide sustainable desalination with lower capital and operating expenses.
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...
Engineers and Consultants Services By SPEC Engineers & Consultants Pvt. Ltd, ...IndiaMART InterMESH Limited
Started to create milestones, we, SPEC Engineers & Consultants Pvt. Ltd marked our presence in the year 1994 and operate in the manufacturing/servicing of Vegetable Oil Plants since 21 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Vegetable Oil Plants, Vegetable Oil Plants, Oleo Chemical Industry Vegetable Oil Plants, Industrial Vegetable Oil Plants, Batch Neutralizing and Bleaching Machines, Continuous Bleaching Oil Machinery, Continuous Physical Refining Machines, Continuous Chemical Refining Machines, Hydrogenation Plants has deepened our roots in the market. We, SPEC Engineers & Consultants Pvt. Ltd breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.Isomalk - 4
Isomalk-4 is a low-temperature process for isomerizing C7 paraffins in naphtha streams. It allows refiners to maximize the value of naphtha by improving yields, octane ratings, and reducing benzene and aromatics formation compared to conventional processing. The process splits naphtha into three streams, sending light C7 to another unit and the C7 mid-cut to the Isomalk-4 unit to produce high-octane products. This results in over 90% liquid yield meeting gasoline specifications with less than 0.6% benzene.
Freytech Eco Line A
The ecoLine-a is an above ground oil water separator that provides highly efficient and cost effective separation of oil from water. It has low maintenance costs, ranging from 30-50% lower than conventional separators. The ecoLine-a exceeds strict European performance standards and can treat wastewater from small facilities in a cost saving way compared to below ground separators.
Presentation W NarrationSidel SRU Flue Gas Condenser
Sidel Systems designs and installs high efficiency hot water heating systems and flue gas condensers to significantly increase boiler efficiency. Their flue gas condenser, the Sidel SRU, typically increases boiler efficiency to 90-95% by transferring heat from the flue gases to the boiler feed water through an aluminum and stainless steel tube design. This can result in substantial fuel savings that often pay back the installation costs within two years or less.
Algae x general presentation
Algae-X International develops magnetic fuel conditioning technologies to combat the natural deterioration of organic fuels over time. This deterioration leads to incomplete combustion, carbon deposits, increased emissions, and eventual engine failure. Algae-X's core technology uses magnetic fields to break up hydrocarbon chains and reverse the deterioration process, improving fuel economy and reducing maintenance costs. Their products include in-line fuel conditioners, fuel additives, and mobile and installed tank cleaning solutions. The market potential is large across transportation, heavy equipment, marine, power generation and oil and gas industries.
Pyromax, Btg, Mag Presentation 2008
BTG is an independent firm specialized in biomass conversion technologies with 25 years of experience developing and implementing bioenergy systems in over 80 countries. Fast pyrolysis is a process that converts biomass into bio-oil by rapidly heating biomass to 450-600°C in the absence of air, producing 75% liquid bio-oil, 12% char, and 13% gas. Fast pyrolysis has advantages over other conversion methods as the liquid bio-oil is easier to transport and produces fewer emissions than combustion. BTG has developed and operated modular 2 ton/hr fast pyrolysis plants to produce bio-oil from various biomass feedstocks.
Oil filtration
Triple R is a complete oil filtration system which removes moisture and contamination from the lube oil. excellence in oil filtration.
HYdraulic and Gear oil filtration systems for cement and plastic component manufacturers, Turbine oil filtration for power plants,mining hydraulics, Wind mills and all oil lubricated rotating equipments.
Keeping the oil clean will enable the equipment run without oil related breakdowns and help reduce oil consumption over a period of time.
Pratibha Sustainability
This document discusses strategies for reducing environmental impact across a textile supply chain. It outlines various processes that reduce water, energy and chemical consumption in dyeing, spinning, farming and waste management. These include cold pad batch dyeing, air jet spinning, organic farming, water harvesting and waste heat recovery. The supply chain also aims to recycle and reuse water and salt where possible. The document then lists some of the company's product capabilities and advantages it brings as a fabric and garment source.
Agc wp-hydroscavprincop
The Hydroscav uses a patented Aero-Jet Mixer to intimately mix heated oil with air, vaporizing water in the oil. This mixture separates in a vessel, with dry oil returning to storage and moist air venting. It can remove water, solids, and dissolved hydrocarbons up to C9. An optional nitrogen injection further aids in removing gases like hydrogen sulfide. Hydroscavs operate continuously with minimal maintenance to extend the useful life of industrial oils.
A Systemic Optimization Approach for the Design of Natural Gas Dehydration Plant
In designing dehydration units for natural gas, several critical parameters exist which can be varied to achieve a specified dew point depression. This paper studies the effects of varying number of trays in the contactor, glycol circulation rate through the contactor, temperature of the reboiler in the regenerator, amount of stripping gas used and operating pressure of the regenerator on the water content of the gas in a glycol dehydration unit. The effect of incorporating free water knock out (FWKO) tank before the absorber is also presented. An offshore platform in the Arctic region was chosen as the base case of this simulation and was modeled by using ASPEN HYSYS. Results show that the incorporation of FWKOT does not affect the TEG circulation rate required to approach equilibrium.
BROCHURE+max+profits+email
The document summarizes the services provided by River Rental Tools (RRT) to maximize oil and gas well profits through minimizing risk, maximizing production, and maximizing retention. RRT has over 40 years of experience providing production optimization, pumping services, filtration and flowback systems, and pipeline remediation services using specialized equipment and chemical solutions.
Ecoprocess coco-filter treatment-unit-flyer
This document summarizes an organic coconut husk wastewater treatment system. It is compact, requires little energy or maintenance, and is prefabricated for simple installation. It can treat 4-70 cubic meters per day and is ideal for small residential developments, institutions, and seasonal applications. Performance data shows it consistently produces high-quality effluent meeting standards with stable performance despite temperature variations.
Intevras Company Overview Jan 09
- INTEVRAS Technologies offers two patented technologies: INTEGRA, an automated disk filtration system, and EVRAS, an evaporative reduction and solidification system.
- EVRAS utilizes low-grade waste heat to concentrate and crystallize waste streams, reducing volume and trucks needed for disposal. It enhances compressor performance by removing heat.
- INTEGRA uses thin, textured plastic disks for filtration with automated self-cleaning and low back-flush volumes, offering effective and efficient filtration.
ABHI PPT2017 JAN
1) CBS products are useful for railway, NTPC, and NHPC applications including locomotive sheds, substations, power stations, and hydroelectric plants.
2) Turbine and transformer oils are used for lubrication and insulation purposes. Proper filtration removes contaminants like water, solids, and gases to maximize oil life.
3) Centrifugal filtration systems from 1,000-5,000 LPH are used to purify turbine and other oils for various applications like locomotives, bowlmills, and switchyards. Maintaining clean oil through removal of contaminants like water extends equipment life.
How to Improve Boiler Efficiency Tips by Experts
Scale forms on boiler surfaces when minerals in water settle out and accumulate. This scale acts as an insulator, reducing heat transfer and increasing fuel usage. Several tips are provided to improve boiler efficiency, such as maintaining water treatment to prevent scale, regularly cleaning fireside and waterside surfaces, installing economizers to recover heat from flue gases, properly sizing and insulating the boiler and steam distribution system, and operating the boiler at the minimum pressure required. Maintaining clean surfaces, recovering waste heat, and optimizing the operating conditions can significantly increase efficiency and reduce fuel costs.
AGC's Base Oil Recovery System Technical Sheet
The document describes an innovative system called the ARR Re-Refining System that can recover base oil and light ends from waste oils using a proprietary vacuum distillation process without chemicals or emissions. The modular system uses a series of distillation skids and other components like filtration systems to purify oils through precise heating and condensation, separating the feedstock into water, fuels, base oils, and other constituent parts. It provides a solution for sustainably reusing waste oils rather than burning them.
kings broucher
Kings Enviro Tech is a renowned manufacturer and supplier of pollution control equipment in India established in 1998. They offer customized equipment that is efficiently and effectively designed to meet clients' specifications. Their products are widely used across industries and are handled by a skilled team to ensure projects are completed on time. Kings focuses on innovation through research and development to adapt to changing market needs. They provide low cost evaporators, effluent treatment plants, biogas plants, and more to treat industrial wastewater for various applications.
Engineered systems
The document discusses EBD Water's pressure filtration systems. It provides details on their operation, including that raw water flows downward through filter media which traps suspended solids. It filters can use media like sand, anthracite or carbon. EBD offers vertical and horizontal pressure filters from 18-144 inches in diameter. The filters are designed to remove impurities from water and can be automatically or manually backwashed.
engineered-systems
The document discusses EBD Water's integrated solutions for water treatment, including reverse osmosis systems for brackish and seawater, sewage treatment plants, industrial wastewater treatment, ion exchange systems, water softeners, and pressure filters. EBD Water offers customized and comprehensive solutions for water and wastewater treatment needs across various industries to produce high quality water, meet environmental regulations, and enable water reuse.
Correct Venting from a Boiler Feedwater Deaerator
The document discusses the importance of proper operation and monitoring of deaerators in steam plants. It emphasizes that while deaerators generally perform well at removing oxygen, regular monitoring of dissolved oxygen levels is still needed, especially at lower pressure systems below 200 psi where oxygen removal is less critical. Excessive venting from the deaerator wastes steam and water, increasing costs. Proper venting is required to ensure adequate deaeration while avoiding unnecessary venting. Methods for measuring dissolved oxygen levels are described to help operators monitor deaerator performance.
XP3 Product Training Manual
What is XP3?
XP3 is a commercial grade, industrial strength, all-in-one fuel enhancer that upgrades the performance characteristics of fuels.
What makes XP3 different than other fuel additives?
XP3 only contains purely concentrated ingredients and active multi-functional components, making it different than common consumer grade additives which are filled with diluted & non-functional components for the retail marketplace.
What are the functional components in XP3?
Purifiers, cleaners, lubricators, stabilizers, conditioners, performance boosters, corrosion inhibitors, water & moisture dispersants and combustion improvers.
What is the history and track record of XP3?
25+ years on the market (since 1989), treats over 4 billion litres of fuel globally every year, sold in 27 different countries, fuel additive guarantee with no single claim since inception.
An invention in multiple applications
ONE SIMPLE PATENTED INVENTION WITH MULTIPLE APPLICATIONS FOR IMPROVING THE QUALITY OF LIFE,ENVIRONMENT AND THE ECONOMY OF THE WORLD !.
Senior Design - Green Diesel Final Report
This document summarizes a design for a plant to produce green diesel as an additive for petroleum diesel. Key aspects of the design include:
1) Choosing soybean oil as the triglyceride feedstock and palladium on carbon as the catalyst for the hydrodeoxygenation reaction in the reactor.
2) Sizing the hydrodeoxygenation reactor to produce 140 million gallons per year with specifications including a volume of 853 m3.
3) Designing flash drums, a distillation column, and a membrane separator to separate the green diesel, water, excess hydrogen, and propane byproducts.
4) Finding that the current design results in a $3.67
More Related Content
Similar to Triblue Produced Water Treatment System
Algae x general presentation
Algae-X International develops magnetic fuel conditioning technologies to combat the natural deterioration of organic fuels over time. This deterioration leads to incomplete combustion, carbon deposits, increased emissions, and eventual engine failure. Algae-X's core technology uses magnetic fields to break up hydrocarbon chains and reverse the deterioration process, improving fuel economy and reducing maintenance costs. Their products include in-line fuel conditioners, fuel additives, and mobile and installed tank cleaning solutions. The market potential is large across transportation, heavy equipment, marine, power generation and oil and gas industries.
Pyromax, Btg, Mag Presentation 2008
BTG is an independent firm specialized in biomass conversion technologies with 25 years of experience developing and implementing bioenergy systems in over 80 countries. Fast pyrolysis is a process that converts biomass into bio-oil by rapidly heating biomass to 450-600°C in the absence of air, producing 75% liquid bio-oil, 12% char, and 13% gas. Fast pyrolysis has advantages over other conversion methods as the liquid bio-oil is easier to transport and produces fewer emissions than combustion. BTG has developed and operated modular 2 ton/hr fast pyrolysis plants to produce bio-oil from various biomass feedstocks.
Oil filtration
Triple R is a complete oil filtration system which removes moisture and contamination from the lube oil. excellence in oil filtration.
HYdraulic and Gear oil filtration systems for cement and plastic component manufacturers, Turbine oil filtration for power plants,mining hydraulics, Wind mills and all oil lubricated rotating equipments.
Keeping the oil clean will enable the equipment run without oil related breakdowns and help reduce oil consumption over a period of time.
Pratibha Sustainability
This document discusses strategies for reducing environmental impact across a textile supply chain. It outlines various processes that reduce water, energy and chemical consumption in dyeing, spinning, farming and waste management. These include cold pad batch dyeing, air jet spinning, organic farming, water harvesting and waste heat recovery. The supply chain also aims to recycle and reuse water and salt where possible. The document then lists some of the company's product capabilities and advantages it brings as a fabric and garment source.
Agc wp-hydroscavprincop
The Hydroscav uses a patented Aero-Jet Mixer to intimately mix heated oil with air, vaporizing water in the oil. This mixture separates in a vessel, with dry oil returning to storage and moist air venting. It can remove water, solids, and dissolved hydrocarbons up to C9. An optional nitrogen injection further aids in removing gases like hydrogen sulfide. Hydroscavs operate continuously with minimal maintenance to extend the useful life of industrial oils.
A Systemic Optimization Approach for the Design of Natural Gas Dehydration Plant
In designing dehydration units for natural gas, several critical parameters exist which can be varied to achieve a specified dew point depression. This paper studies the effects of varying number of trays in the contactor, glycol circulation rate through the contactor, temperature of the reboiler in the regenerator, amount of stripping gas used and operating pressure of the regenerator on the water content of the gas in a glycol dehydration unit. The effect of incorporating free water knock out (FWKO) tank before the absorber is also presented. An offshore platform in the Arctic region was chosen as the base case of this simulation and was modeled by using ASPEN HYSYS. Results show that the incorporation of FWKOT does not affect the TEG circulation rate required to approach equilibrium.
BROCHURE+max+profits+email
The document summarizes the services provided by River Rental Tools (RRT) to maximize oil and gas well profits through minimizing risk, maximizing production, and maximizing retention. RRT has over 40 years of experience providing production optimization, pumping services, filtration and flowback systems, and pipeline remediation services using specialized equipment and chemical solutions.
Ecoprocess coco-filter treatment-unit-flyer
This document summarizes an organic coconut husk wastewater treatment system. It is compact, requires little energy or maintenance, and is prefabricated for simple installation. It can treat 4-70 cubic meters per day and is ideal for small residential developments, institutions, and seasonal applications. Performance data shows it consistently produces high-quality effluent meeting standards with stable performance despite temperature variations.
Intevras Company Overview Jan 09
- INTEVRAS Technologies offers two patented technologies: INTEGRA, an automated disk filtration system, and EVRAS, an evaporative reduction and solidification system.
- EVRAS utilizes low-grade waste heat to concentrate and crystallize waste streams, reducing volume and trucks needed for disposal. It enhances compressor performance by removing heat.
- INTEGRA uses thin, textured plastic disks for filtration with automated self-cleaning and low back-flush volumes, offering effective and efficient filtration.
ABHI PPT2017 JAN
1) CBS products are useful for railway, NTPC, and NHPC applications including locomotive sheds, substations, power stations, and hydroelectric plants.
2) Turbine and transformer oils are used for lubrication and insulation purposes. Proper filtration removes contaminants like water, solids, and gases to maximize oil life.
3) Centrifugal filtration systems from 1,000-5,000 LPH are used to purify turbine and other oils for various applications like locomotives, bowlmills, and switchyards. Maintaining clean oil through removal of contaminants like water extends equipment life.
How to Improve Boiler Efficiency Tips by Experts
Scale forms on boiler surfaces when minerals in water settle out and accumulate. This scale acts as an insulator, reducing heat transfer and increasing fuel usage. Several tips are provided to improve boiler efficiency, such as maintaining water treatment to prevent scale, regularly cleaning fireside and waterside surfaces, installing economizers to recover heat from flue gases, properly sizing and insulating the boiler and steam distribution system, and operating the boiler at the minimum pressure required. Maintaining clean surfaces, recovering waste heat, and optimizing the operating conditions can significantly increase efficiency and reduce fuel costs.
AGC's Base Oil Recovery System Technical Sheet
The document describes an innovative system called the ARR Re-Refining System that can recover base oil and light ends from waste oils using a proprietary vacuum distillation process without chemicals or emissions. The modular system uses a series of distillation skids and other components like filtration systems to purify oils through precise heating and condensation, separating the feedstock into water, fuels, base oils, and other constituent parts. It provides a solution for sustainably reusing waste oils rather than burning them.
kings broucher
Kings Enviro Tech is a renowned manufacturer and supplier of pollution control equipment in India established in 1998. They offer customized equipment that is efficiently and effectively designed to meet clients' specifications. Their products are widely used across industries and are handled by a skilled team to ensure projects are completed on time. Kings focuses on innovation through research and development to adapt to changing market needs. They provide low cost evaporators, effluent treatment plants, biogas plants, and more to treat industrial wastewater for various applications.
Engineered systems
The document discusses EBD Water's pressure filtration systems. It provides details on their operation, including that raw water flows downward through filter media which traps suspended solids. It filters can use media like sand, anthracite or carbon. EBD offers vertical and horizontal pressure filters from 18-144 inches in diameter. The filters are designed to remove impurities from water and can be automatically or manually backwashed.
engineered-systems
The document discusses EBD Water's integrated solutions for water treatment, including reverse osmosis systems for brackish and seawater, sewage treatment plants, industrial wastewater treatment, ion exchange systems, water softeners, and pressure filters. EBD Water offers customized and comprehensive solutions for water and wastewater treatment needs across various industries to produce high quality water, meet environmental regulations, and enable water reuse.
Correct Venting from a Boiler Feedwater Deaerator
The document discusses the importance of proper operation and monitoring of deaerators in steam plants. It emphasizes that while deaerators generally perform well at removing oxygen, regular monitoring of dissolved oxygen levels is still needed, especially at lower pressure systems below 200 psi where oxygen removal is less critical. Excessive venting from the deaerator wastes steam and water, increasing costs. Proper venting is required to ensure adequate deaeration while avoiding unnecessary venting. Methods for measuring dissolved oxygen levels are described to help operators monitor deaerator performance.
XP3 Product Training Manual
What is XP3?
XP3 is a commercial grade, industrial strength, all-in-one fuel enhancer that upgrades the performance characteristics of fuels.
What makes XP3 different than other fuel additives?
XP3 only contains purely concentrated ingredients and active multi-functional components, making it different than common consumer grade additives which are filled with diluted & non-functional components for the retail marketplace.
What are the functional components in XP3?
Purifiers, cleaners, lubricators, stabilizers, conditioners, performance boosters, corrosion inhibitors, water & moisture dispersants and combustion improvers.
What is the history and track record of XP3?
25+ years on the market (since 1989), treats over 4 billion litres of fuel globally every year, sold in 27 different countries, fuel additive guarantee with no single claim since inception.
An invention in multiple applications
ONE SIMPLE PATENTED INVENTION WITH MULTIPLE APPLICATIONS FOR IMPROVING THE QUALITY OF LIFE,ENVIRONMENT AND THE ECONOMY OF THE WORLD !.
Senior Design - Green Diesel Final Report
This document summarizes a design for a plant to produce green diesel as an additive for petroleum diesel. Key aspects of the design include:
1) Choosing soybean oil as the triglyceride feedstock and palladium on carbon as the catalyst for the hydrodeoxygenation reaction in the reactor.
2) Sizing the hydrodeoxygenation reactor to produce 140 million gallons per year with specifications including a volume of 853 m3.
3) Designing flash drums, a distillation column, and a membrane separator to separate the green diesel, water, excess hydrogen, and propane byproducts.
4) Finding that the current design results in a $3.67
Similar to Triblue Produced Water Treatment System (20)
A Systemic Optimization Approach for the Design of Natural Gas Dehydration Plant
A Systemic Optimization Approach for the Design of Natural Gas Dehydration Plant
Recently uploaded
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Recently uploaded (20)
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Triblue Produced Water Treatment System
- 1. SALES@TRIBLUECORP.COM WWW.TRIBLUECORP.COM CALL OR EMAIL US FOR MORE INFORMATION (281) 9-NAT-GAS Produced Water Treatment System PERFORMANCE ECONOMICS HEADER 3 (ALL CAPS) Triblue’s Produced Water Treatment System allows oilfield produced water to be efficiently and economically processed into freshwater and dry, oil-free salt. Triblue’s system does not require consumables or pretreatment. Up to a 90% operating costs savings is possible with the system while also producing a new revenue stream in the form of fresh water. System is capable of processing oilfield brine into freshwater and dry, oil-free salt: Oilfield brine may be processed to clean, freshwater for less than $0.10 in energy costs Flare gas, ethane or otherwise sub-quality gas may be used to fuel process Freshwater effluent contains less than 3 ppm hydrocarbons o System may be configured to reduce this amount further o May be used to produce fracturing fluid o Contains no grease or dissolved solids System is capable of processing produced water with extremely wide variation in composition o Fluctuations in TDS, hydrocarbons and flow rate does not affect performance Footprint of system is compact o 400 bbl/day unit has footprint of a typical shipping container. Flowback/used frac water may be efficiently recycled for reuse or disposal into neighboring water bodies System processes produced water with minimal energy requirements: Electricity and gas are sole inputs needed for process Anticipated CAPEX of $350/bbl-day capacity of system OPEX of approximately $0.40/bbl Lead time of 3-4 months