Berger Paint presents LSE Metallic Finish to paint your walls with your favourite metallic look. Comes in three bases with a total of 50 shades to ensure your walls stand out.

1. Berger Luxury Silk Metallic Finish is the best quality water based metallic finish coating for interior application. It combines
the best aesthetic appeal of silk with glitter particles that can give your wall a sparkling outlook. A special broad spectrum
non-toxic and environment-friendly fungicide and biocide imparts strong antifungal properties to Luxury Silk Metallic Finish.
Its characteristic additives improve its cleaning ability & provide oil repellency which helps cleaning of all sorts of stains from
the surface and gives the surfaces evergreen appearances & rich finish. It has exceptionally high scrub-resistance and can
be cleaned easily with water or a mild solution of water and soap (not detergent) for easy maintenance.
FEATURES & BENEFITS:
• Special quality Interior Paints with Metallic finish
• Durability of up to 5 to 6 years
• Water Based Paint with Pure Acrylic Polymer
• Tremendous airborne dirt resistance & blocks oil penetration
• Excellent alkali & efflorescence resistance
• Physical barrier to salt migration
• Excellent substrate penetration & top coat adhesion
RECOMMENDED SURFACES:
Interior/POP/puttied/surfaces etc.
SURFACE PREPARATION:
Surface must be clean, free from dust, grease, oil, heavy soot, chalk, mildew, etc. Chalk joints and fill holes where necessary. All old,
loose, flaking or peeling paint must be removed.
Surface preparation for new walls:
After plastering, allow to dry the surface at least 8-12 weeks. Moisture content should be less than 15% (equipment for measuring
moisture content: Protimeter).
On dry wall, apply one coat Robbialac Water Based Sealer thinning with 100% water. Dry the wall at least 4-6 hours before putty
application. Apply two coats of Robbialac Water Based Wall Putty with 6-8 hours interval for smooth finish. After proper drying (24 hours)
of wall putty, rub down the surface with sandpaper to provide an appropriate surface for finish coat.
Surface preparation for Old walls/Previously painted walls:
Previously painted surface should be wire brushed and properly cleaned to ensure that the surface is free from loose particles before paint
application. Apply one coat Robbialac Water Based Sealer thinning with 100% water. Dry the wall at least 4-6 hours before putty
application. For smooth finish, apply 2 coats of Robbialac Water Based Wall Putty with 6-8 hours intervals. After proper drying (24 hours)
of wall putty, rub down the surface with sandpaper to provide a sound surface for finish coat.
BERGER PAINTS BANGLADESH LIMITED
Berger House, House # 8, Road # 2, Sector # 3, Uttara
Phone: 02-48953665, E-mail: info@bergerbd.com, www.bergerbd.com
i n t e r i o r s

2. PREPARATION FOR APPLICATION:
Apply 1 coat Robbialac Water based Sealer as a base coat prior to application of Luxury Silk Metallic Finish top coat and allow it to dry for
4-6 hours. Do not apply Luxury Silk Metallic Finish on Robbialac All Purpose Putty.
Apply 2-3 coats Luxury Silk Metallic Finish paint as finish coat/top coat with 6-8 hours interval. Do not stretch material beyond
recommended coverage.
Dilution Ratio:
• 400-500 ml water per 1 liter of Silk Metallic (Paint:Water = 2:1) for roller/brush Application.
PRODUCT SPECIFICATIONS:
SHADES : Luxury Silk Metallic Finish Shade Card
60º SHEEN : 40 Max
85º SHEEN : 50 Max
VEHICLE : Special type Acrylic resin emulsions
PIGMENTATION : Metallic Silver, Gold & Bronze pigment
SOLVENT : Water, Glycol
VISCOSITY : 112-106 KU
RECOMMENDED COVERAGE : Direct application: 130-150 sq.ft/Lit/Coat*
*Coverage may vary due to factors such as application methods, nature of substrate, conditions etc.
WEIGHT PER GALLON : 4.3 Kg (Max without container)
DRY, SET TO TOUCH : 30 minutes
DRY HARD : 6 hours (recoat); Total Curing Time: 96 Hours
CLEAN UP SOLVENT : Water
TYPE OF CURE : Coalescence
TINTING : Universal colorants
AROMATIC CONTENT : Below 100 ppm
Note:
• Stir well before use • Do not apply paint at temperature below 50ºF (10ºC) • Use good quality nap/short haired felt roller to apply the LSE Metallic paint
• Use the thinned material within 12 hours • Recoat and drying of paint are tested at 30± 2ºC and 60-65% RH. These may very under different conditions
• Fire Hazard Class: Non-Flammable • Tint with Berger Paints colorants only to get desired shade from Berger Shade card • Keep the container tightly
closed in cool and dry place • Please keep it out of reach of children and away from foodstuff • In case of contact with eyes, wash immediately with
water and seek medical advice • For safety measures, refer to MSDS
(The information in this leaflet is given in good faith. Covering capacity is indicated on the basis of results obtained on a prepared smooth surface.)
BERGER PAINTS BANGLADESH LIMITED
Berger House, House # 8, Road # 2, Sector # 3, Uttara
Phone: 02-48953665, E-mail: info@bergerbd.com, www.bergerbd.com
i n t e r i o r s