1. CURRICULUM VITAECURRICULUM VITAE
Permanent Address:-
5/166, Jawaher Nagar5/166, Jawaher Nagar
Durga Mandir Marg,Durga Mandir Marg,
Aligarh (U.P.)Aligarh (U.P.)
Ph.09596881664Ph.09596881664
0962203237109622032371
aashokkumar.2007@rediffmail.comaashokkumar.2007@rediffmail.com
ASHOK KUMAR UPADHYAYASHOK KUMAR UPADHYAY
CARRIER OBJECTIVECARRIER OBJECTIVE:-:-
Looking for an opportunity where I can achieve my personal goal by aligning organizational goal using my technical skill,
knowledge, experience and personal attribute.
QUALIFICATION:-
• B.TECH. In Mechanical Engineering From Technical Board of Monad University
of Utter-Pradesh (UP) in 2014
• Diploma in Mechanical Engineering from Technical Board of Bangalore in 2004.
WORK EXPERIENCE:
• More than 11 year of work experience in Press Shop & Weld Shop &Assembly & Engineering Industry.
OVERVIEW:-
• TURRET PUNCHING Amada- Vipros 2510c Machine, Amada- Vipros 255c Machine, Punching Strip Machine,
Punching machine HRT- 300 JFY machine, Amada- EM 2510NT, Amada- 3015 Laser machine.
CNC PROGRAMMING:-
• AP- 100 software, E- MAC software, Metallic cad- cam software.
BREAK PRESS:-
• Amada- vipros Rg- 100, Amada- HDS 8025, Amada- F&B 1025, Amada- RG 555, Bending (PR6C)- 100x3100),
Bending (H & H) (2meter), Bending (H & H) (3meter).
SHEARING MACHINE:-
• (H & H machine (3meter), Godrej machine (3meter), Godrej machine (2meter).
PRESS SHOP:-
• 600 Ton Press: Impact machine(pneumatic )
• 150-400 Ton Hydraulic Presses: Kabeera
• Mechanical Presses (80-250 Ton): Crasmofy, Godrej etc.
WELD SHOP:-
• TIG Welding
• MIG welding
• Spot welding
• Arc welding.
• Projection Welding
KRA:-
• On time target achievement
• Productivity improvement through continual improvement.
• Cost reduction.
2. • To increase EVA per work man.
• House keeping.
JOB PROFILE:-
• Analysis of total capacity of production work load on machine.
• Off load planning if required.
• Daily monitoring of production planning actual.
• Display to loading plan with production planning at each machine.
• Advance analysis of tool status & co ordination with concerned.
• Utilization of machine as per targeted OEE.
• Activity to have maximum OEE.
• Planned preventive maintenance of each machine.
• Ensure quality products of each part as per standard.
• Co ordination & daily meeting (customer requirement & complaint).
• Daily production meeting with concerned.
• Display of production flow chart with each part at operation.
• Cost saving activity with additional & high production rate.
• Sampling for new development.
• Knowledge 5S, 3M ,7QCTOOLS,PPAP, PFMEA, SPC, MSA, Kaizens, POKA-YOKA, SMED TPM etc
• Preparing daily, weekly & monthly Production Planning and the execution of the same in the shop floor for
making production smooth and easy.
• Man power planning, Monthly Process and Equipment Performance Report.
• Material planning for monthly targeted Job.
• Optimum utilization of available resources.
• Productivity increase by automation and motivation.
• Reducing cycle time, repair, and rework & ensuring quality as per standards.
• Consumable consumption and high utilization of equipments for the process job.
• To ensure the single piece, unidirectional flow and line balancing for effective and defect free production.
• Providing information to maintenance Department, Tool Room & Quality Department for their concerned.
• Working with team members and gather improvement ideas (Kaizen ideas) & resolve factor effecting product
quality, maintaining 5’S activity.
• To develop a senses of quality control among the workers.
• To ensure that production plan is met and optimum production is achieved as per the norm.
• To monitor the productivity and improve upon the same.
• Prepare process flow work instruction for each model and continuously update.
• Carryout the rootcause analysis of the rejection and rework.
• Customer feedback and make –POKA-POKA where possible and ensure that system are in place for preventing
the Re-occurrence.
• To motivevate the workmen and good-team work Delop jig-Fixture for getting the dimensional.
• Accuracies during manufacturing co-donate with Engg for BOM preparation during the protosage.
• Ensure the material is consumed as per BOM during the Protosage.
• Carry out study on actual BOM consumption and improve the same study the machine capabilities.
• In advance and plan for out sourcing in case of productionplan is more than the machine capability.
3. • Acoustic Enclosure Assembly.
• AcousticEnclosure Assembly as per plan and as per drawing.
• Acouustic Enclosure component stuff as per Requirement.
• Engine mounting on base frame.
• Coupling of engine and alternator.
• Alignment of engine and alternator shaft.
• Inspection of engine accessories.
• Genset is fully assembled.
• Performance testing of genset.
• Genset is fully tested
• Finshed component Ready for /Assembly Packing.
• Process for packing and dispatch.
WORK EXPERIENCE:-
JAKSON L.T.D KATHUA (J$K.) (17MAY-2013 TO TILL DATE)
Designation : Manager manufacturing & Assembly
Quality Certified : ISO- 9001- 2008
Product : Acoustic Enclosure (Genrator) Sheet Metal Components &
Manufacturing facility : Sheet Metal, Fabrication Assembly
LOHIA STARLINGER LTD. (LOHIA GROUP KANPUR,) (JULY 2008 TO MAY. 2013)
Designation : Sr. Engineer Sheet metal & Weld shop
Quality Certified : TS- 16949-2006
Product : Tape line machine, BCS Machine, Winder
Machine, Baby Machine
Turn Over : 359 Corers (2008 to 2009)
Man Power : 4000
Manufacturing Facility : Sheet Metal, Fabrication, Machine Assembly, R &
D, Prototype Development.
LLOYD ELECTRICAL & ENGG.LTD BHIWADI, ALWAR (RAJ.) (AUG. 2004 TO JULY 2008)
Designation : Engineer sheet metal & Weld Shop
Product : Heat Exchange Coil for A.C. & Refrigeration
Turn Over : 200 corers (2007-08)
Man Power : 500
Manufacturing : Sheet Metal, Weld Shop, Coil Assembly, R & D
PERSONAL DETAILS:-PERSONAL DETAILS:-
Father’s Name : Sh. Ram Niwas Upadhyay
Date of Birth : 3rd
Sep, 1978
Permanent Address : 5/166, Jawaher Nagar, Aligarh (U.P.)
Marital Status : Married
Language Known : Hindi & English
Salary Expected : Negotiable
