Wernick deliver contemporary modular buildings in the UK - education, healthcare, leisure and commercial buildings can be produced in a quality-controlled factory setting and delivered to the customer to provide a timely accommodation solution. These slides look at recent projects (2019) and the advantages of choosing a modular building versus a 'traditional' building.

1. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Delivering offsite construction across the supply chain

2. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Wernick Buildings
 Part of the Wernick Group, est in 1934
 Owned and run by the Wernick family
 Over 700 members of staff across the UK
 2018 turnover of £120m
 Head office in Wickford, Essex
 Manufacturing facility in Port Talbot, South
Wales
 Turnkey design and build service for
relocatable and permanent modular
buildings

3. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Manufacturing facility
 9 acre factory site, with 125,00sqft factory
 Producing 750-1200sqm of modular buildings
per week
 Modules manufactured under ISO 9001 and
ISO14001 standards

4. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Historical perception and todays challenge

5. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Offsite revolution – is the time now right for offsite and
modular to become mainstream?

6. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Wernick Swiftplan®
The future of modular buildings?

7. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Key benefits of Swiftplan®
 Up to 50% shorter build times
 Lower cost compared to traditional construction
 Programme certainty
 Factory conditions improve accuracy and quality
 DFMA with near zero waste for modular production
 Less noise, waste and disruption to site
 Fully non-combustible wall panel system
 Improved health and safety
 Higher thermal mass compared to traditional light
gauge steel modular

8. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Cross laminated timber (CLT) floor
Welded hot rolled steel frame
Swiftplan® Module Design – 6 storey capability
Non-combustible wall panels

9. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Module lengths from 6m to 15m long
Maximised internal ceiling heights
3300mm to underside of structure
3600mm to underside of soffit
Swiftplan Module Design – 6 storey capability
Clear internal spans to 12m

10. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Digital design – BIM & 3D Revit
MEP

11. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Digital design – BIM & 3D Revit

12. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
DFMA – Design for manufacture and assembly

13. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
DFMA – Design for manufacture and assembly
Rapidplan® (launched 2000)
12m x 3.6m lower floor module
506 individual components
(excluding fixing and adhesives)

14. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Swiftplan® (launched 2018)
12m x 3.6m lower floor module
66 individual components
(excluding fixing and adhesives)
87% reduction in
Components used!
DFMA – Design for manufacture and assembly

15. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
 Two storey 1,000sqm
office block
 24 no. Swiftplan modules,
plus portal frame lobby
 Breeam Excellent
Case Study - Wernick Group Head Office, Essex

16. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Specific Active Office

17. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Specific Active Office

18. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Specific Active Office
Lots of photos

19. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Building Energy
U values: Floor 0.12 W/m2k
Walls 0.18 W/m2k
Roof 0.15 W/m2k
Windows 1.6 W/m2k
Air permeability 3.2 m3/hr.m2 @ 50Pa
PV generation 10kw
Building emission rate 8.07 KgCO2/m2 per year
Achieved EPC “A” 14

20. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Energy – Thermographic survey of the Swiftplan system

21. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Waste materials
Breeam Excellent target 19kg/m2
Wickford Head Office: 1,000sqm two storey office
Module manufacture: 262 kg = 0.262 kg/m2
Factory module fit out: 4,071 kg = 4.071 kg/m2
Site fit out: 11,080 kg = 11.08 kg/m2
Total waste generated = 15.151 kg/m2
Percentage of waste recycled
and diverted from landfill = 98%

22. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Total project cost £2.175m (£2,175/m2)
Fees (planning, design, BR etc.) 1.0%
Site prelims 4.0%
Modular building (factory) 40%
Modular site fit out 26%
MEP 13%
Delivery & Install 3.5%
External & site works 9.0%
Breeam excellent upgrade 3.5%

23. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Total project cost £2.175m (£2,175/m2)
Fees (planning, design, BR etc.) 1.0%
Site prelims 4.0%
Modular building (factory) 40%
Modular site fit out 26%
MEP 13%
Delivery & Install 3.5%
External & site works 9.0%
Breeam excellent upgrade 3.5%

24. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Case Study – Swansea University lecture block
 Two storey 2,700sqm
lecture block
 60 no. Swiftplan
modules
 16 week site fitout
programme

25. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Early Engagement
Active office 2018

26. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Concept
design
Planning
Detailed
design
Appoint
Contractors
Concept
design
Choose
modular
contractor
Planning
Detailed
design
Early Engagement

27. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Design
External shot

28. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Programme
 Enquiry received – December 2018
 Order placed – March 2019
 Start on site – June 2019
 Module delivery – June 2019
 Handover – November 2019

29. Presentation for Supply Chain Sustainability School – Nov 2019
Andy King – Deputy Managing Director
®
Thank you.
Questions?