Alphonso Wynn has over 33 years of experience in manufacturing and 25 years in the US Air Force and Reserves. He has held several roles including production lead, tool planner/setup, setup mechanic, process engineering technician, product auditor, and assembly operator. His experience includes managing machine tool inventory, setting up and monitoring CNC machines, performing quality checks, investigating nonconformances, and training operators. He aims to bring this experience to help a world class company meet competitive challenges.
1. 9676 Pebble Creek Blv d.
Summerv ille, Sc 29485
Phone (843) 873-4316
Fax (843) 873-4316
E-mail f onzow@y ahoo.comt
Mobile: (843) 709-2454
AlphonsoWynn
Objective To bring my 33 years of manufacturing and 25 years of US Air Force
and US Air Force Reserve experience to a world class company, where I
can help them meet the challenges faced in this competitive world
economy.
Functional
summary
Worked 5 years as production lead, 7 years as a tool planner/setup, 6
years as a setup mechanic, 7 months as process engineering tech, 9
years as a product auditor, 3 years as a port closer operator and 2 years
as an assembly operator.
Employment May 7, 2011 – September 28, 2016 Lincoln Electric Company Ladson,
SC
Production Lead
Using SAP run order report as required to plan production
Ensure order requirements are met on time
Bring resources together to solve assembly and quality
problems
May 6, 2010 – May 6, 2011 Hammes Staffing Services N.
Charleston, SC
CNC Lathe Operator
Monitor machine operation
Perform machine changeovers
Perform quality checks to print specification using various
measuring instruments
Make offset adjustments to correct any out of specification
conditions
June 18, 1981 – July 18, 2008 Robert Bosch LLC Charleston, SC
Tool Planner/ Setup April 2001 – July 2008
Managed machine tool inventory using SAP and MS Excel
Maintained tool delivery to machining cells to meet MRP requirements
Inspected incoming components to print specifications using various
types of measuring instruments and documented findings
Contacted suppliers for RMA’s, to expedite deliveries and to
communicate any quality issues.
Programmed the Zoller CNC optical measurement machine to set tools
for the machining centers
2. Inspected used tools using a microscope and 10x loop light to evaluate
performance and documented finding on Excel spreadsheet
Trained operators to: preset tools, read preset sheets and maintain
inventory management system.
Employed C.I.P. to improved efficiency and effectiveness of workshop
Managed tool preset area supervising 5 -7 associates in two buildings
over 3 shifts
Setup Mechanic August 1995 – April 2001
Monitored machine operation and assist operators
Performed complex machine setup and changeovers
Performed quality checks to print specification & work instructions
Used SPC to monitor process variation
Investigated all out of control conditions and took appropriate action
Made machine adjustments to maintain optimum quality
Performed PM’s, TPM checks and repair major & minor breakdowns
Process Engineering Technician January 1995 – August
1995
Compared process micro flow diagram to active process
Rewrote process work instructions to match process flow diagram
Developed training manual to standardize operator training process
Performed other duties as assigned
Product Auditor ? 1986 – January 1995
Performed audits of assembly processes to work instructions
Sampled incoming components and inspect for defects and correct part
to drawing or specification using visual inspection and various
measuring tools
Performed destructive testing and inspection of products components to
assembly drawing to meet customer specifications
Investigated product nonconformance to test specifications
Documented and reported findings as required
May 10, 1976 – May 9, 1980 US Air Force Charleston AFB, SC
Aircraft Mechanic
Performed preflight, postflight, thuflight and periodic inspections
Performed launches, recoveries, and servicing of military cargo aircraft
Documented inspection findings as required
Performed investigations and repairs on various aircraft systems using
technical orders, job guides and blueprints
Documented maintenance records as required
May 10, 1980 – April 2004 US Air Force Reserves Charleston AFB, SC
Trident Technical College August 1980 – September 1983
(attended)
Mechanical Engineering Technology
3. Austin-East High School August 1968 – May 1971
Auto Mechanics
Introduction to the Operation of CNC Machining Centers Jan.11, 2001
Tooling and Setup Parameters July 21, 2000
Certified Quality Technician August 14, 1994
Winning through Interaction May 19, 1994
Analytical trouble Shooting July 24, 1989
Coaching and Counseling June 30, 1989
References on Request