The document provides formulas for calculating fabric requirements for various woven garments. For a woven top, it gives formulas to calculate the body length, sleeve length, 1/2 width, plackets, and total fabric required. For a woven bottom, it provides formulas for the body, pockets, and shrinkage percentage. It also includes basic formulas to calculate the fabric requirement for a T-shirt and polo shirt based on measurements and fabric properties.

1.  Woventop calculation: ( in inch measurement)
Body length=hps to hem + hem height +SA(2 times)
Sleeve length=sleeve length+(cuff height×2)+SA(4times)
For short sleeve=sleeve length+hem height+SA(2 times)
½ widest=1/2 chest / ½ bottom+avg. placket+SA(2 times)
Avg. placket
Lower placket=3+3+SA(1 times)
Upper placket=6+6+SA(1 times)
Avg. placket=
𝒍𝒐𝒘𝒆𝒓 𝒑𝒍𝒂𝒄𝒌𝒆𝒕+𝒖𝒑𝒑𝒆𝒓 𝒑𝒍𝒂𝒄𝒌𝒆𝒕
𝟐
1.Body formula=
( 𝒃𝒍+𝒔𝒍)×
𝟏
𝟐
𝒘𝒊𝒅𝒆𝒔𝒕×𝟐
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉(𝒄𝒖𝒕𝒂𝒃𝒍𝒆)×𝟑𝟔"
+ 𝒘𝒂𝒔𝒕𝒂𝒈𝒆 %
Cutable fabric=fabric width-1”
2.Collar=
[ 𝒄𝒍+𝒔𝒂( 𝟒𝒕𝒊𝒎𝒆𝒔)]×[𝒄𝒘+𝒔𝒂( 𝟒 𝒕𝒊𝒎𝒆𝒔)]×𝒏𝒐.𝒐𝒇 𝒄𝒐𝒍𝒍𝒂𝒓
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉(𝒄𝒖𝒕𝒂𝒃𝒍𝒆)×𝟑𝟔"
+wastage%
Collar length=collar length×2
Collar width=collar width ×2
3.collar band=
[ 𝒄. 𝒃𝒂𝒏𝒅 𝒍𝒆𝒏𝒈𝒕𝒉+𝒔𝒂( 𝟒 𝒕𝒊𝒎𝒆𝒔)]×[𝒄.𝒃𝒂𝒏𝒅 𝒘𝒊𝒅𝒕𝒉+𝒔𝒂( 𝟒 𝒕𝒊𝒎𝒆𝒔)]×𝒏𝒐.𝒐𝒇 𝒄. 𝒃𝒂𝒏𝒅
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉 (𝒄𝒖𝒕𝒂𝒃𝒍𝒆)×𝟑𝟔"
+ 𝒘𝒂𝒔𝒕𝒂𝒈𝒆%
Collar band length=collar band length× 2
Collar band width=collar band width× 2
4.Yoke=
( 𝒚𝒐𝒌𝒆 𝒍𝒆𝒏𝒈𝒕𝒉+𝒔𝒂)×(𝒚𝒐𝒌𝒆 𝒘𝒊𝒅𝒕𝒉+𝒔𝒂)×𝒏𝒐.𝒐𝒇 𝒚𝒐𝒌𝒆
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉(𝒄𝒖𝒕𝒂𝒃𝒍𝒆 )×𝟑𝟔"
+ 𝒘𝒂𝒔𝒕𝒂𝒈𝒆%
[yoke SA (2 times)
5. pocket=
[ 𝒑𝒍+𝑺𝑨( 𝟐 𝒕𝒊𝒎𝒆𝒔)]×[𝒑𝒘+𝒔𝒂( 𝟐 𝒕𝒊𝒎𝒆𝒔)]×𝒏𝒐.𝒐𝒇 𝒑𝒐𝒄𝒌𝒆𝒕
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉(𝒄𝒖𝒕𝒂𝒃𝒍𝒆 )×𝟑𝟔"
+ 𝒘𝒂𝒔𝒕𝒂𝒈𝒆 %
Pocket length=pocket length +hem height
Total fabric requard=body formula+collar+collar band+yoke+pocket = ans. …….yards

2.  Wovenbottom calculation: in inchmeasurement
Body=
{ 𝒊𝒏 𝒔𝒆𝒂𝒎+𝒃𝒂𝒄𝒌 𝒓𝒊𝒔𝒆+𝒉𝒆𝒎 𝒉𝒆𝒊𝒈𝒉𝒕+( 𝒘𝒂𝒊𝒔𝒕 𝒃𝒂𝒏𝒅×𝟐)+𝒔𝒂( 𝟒 𝒕𝒊𝒎𝒆𝒔)}×(
𝟏
𝟐
𝒕𝒉𝒊𝒈𝒉+𝒔𝒂(𝟐𝒕𝒊𝒎𝒆𝒔)×𝒏𝒐.𝒐𝒇 𝒑𝒂𝒓𝒕
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉(𝒄𝒖𝒕𝒂𝒃𝒍𝒆)×𝟑𝟔"
+ 𝐰𝐚𝐬𝐭𝐚𝐠𝐞 %
pocket=
{ 𝒑𝒐𝒄𝒌𝒆𝒕 𝒍𝒆𝒏𝒈𝒕𝒉+𝑺𝑨( 𝟐 𝒕𝒊𝒎𝒆𝒔)}×{ 𝒑𝒐𝒄𝒌𝒆𝒕 𝒘𝒊𝒅𝒕𝒉+𝑺𝑨( 𝟐 𝒕𝒊𝒎𝒆𝒔)}×𝒏𝒐.𝒐𝒇 𝒑𝒐𝒄𝒌𝒆𝒕
𝒇𝒂𝒃𝒓𝒊𝒄 𝒘𝒊𝒅𝒕𝒉(𝒄𝒖𝒕𝒂𝒃𝒍𝒆 )×𝟑𝟔"
+ wastage%
shrinkage %: ( for example warp 5%,weft-6%)
[warp a Jodi (+) thake tahole( -)korbo ar weft a Jodi( -) thake tahole( +) korbo]
 Basic T shirt cost consumption:(inCM measurement)
( 𝒃𝒐𝒅𝒚 𝒍𝒆𝒏𝒈𝒕𝒉+𝒔𝒍𝒆𝒆𝒗𝒆 𝒍𝒆𝒏𝒈𝒕𝒉+𝑺𝑨)×(
𝟏
𝟐
𝒄𝒉𝒆𝒔𝒕 𝒘𝒊𝒅𝒕𝒉+𝑺𝑨)×𝟐×𝑮𝑺𝑴×𝟏𝟐
𝟏𝟎𝟎×𝟏𝟎𝟎×𝟏𝟎𝟎𝟎
+wastage%
= kg/dzn
(SA for length=12cmand SA for width=6)
 Polo shirt cost consumption:(in cm measurement)
Seam allowance(SA) should be included on each of the measurement)
1.Body parts=
( 𝒃𝒐𝒅𝒚 𝒍𝒆𝒏𝒈𝒕𝒉+𝒔𝒍𝒆𝒆𝒗𝒆 𝒍𝒆𝒏𝒈𝒕𝒉)×(
𝟏
𝟐
𝒄𝒉𝒆𝒔𝒕𝒘𝒊𝒅𝒕𝒉×𝟐)×𝑮𝑺𝑴×𝟏𝟐
𝟏𝟎𝟎×𝟏𝟎𝟎×𝟏𝟎𝟎𝟎
=kg/DZN
2.collar =
𝒄𝒐𝒍𝒍𝒂𝒓 𝒍𝒆𝒏𝒈𝒕𝒉 ×𝒄𝒐𝒍𝒍𝒂𝒓 𝒘𝒊𝒅𝒕𝒉×𝟏𝟐×𝑮𝑺𝑴
𝟏𝟎𝟎×𝟏𝟎𝟎×𝟏𝟎𝟎𝟎
=kg/DZN
warp weft
warp weft

3. 3.cuff=
𝒄𝒖𝒇𝒇 𝒍𝒆𝒏𝒈𝒕𝒉×𝒄𝒖𝒇𝒇 𝒘𝒊𝒅𝒕𝒉×𝟐×𝟏𝟐×𝒈𝒔𝒎
𝟏𝟎𝟎×𝟏𝟎𝟎×𝟏𝟎𝟎𝟎
=kg/DZN
4.pocket=
𝒑𝒐𝒄𝒌𝒆𝒕 𝒍𝒆𝒏𝒈𝒕𝒉×𝒑𝒐𝒄𝒌𝒆𝒕 𝒘𝒊𝒅𝒕𝒉×𝟏𝟐×𝑮𝑺𝑴
𝟏𝟎𝟎×𝟏𝟎𝟎×𝟏𝟎𝟎𝟎
=kg/dzn
5.half moon=
𝒉𝒂𝒍𝒇 𝒎𝒐𝒐𝒏 𝒍𝒆𝒏𝒈𝒕𝒉×𝒉𝒂𝒍𝒇 𝒎𝒐𝒐𝒏 𝒘𝒊𝒅𝒕𝒉×𝟏𝟐×𝑮𝑺𝑴
𝟏𝟎𝟎×𝟏𝟎𝟎×𝟏𝟎𝟎𝟎
=kg/DZN
So, total amount of s/j=body parts(body+ sleeve)+pocket +half moon+ wastage%
=kg/dzn
So,total amount of RIB fabric=collar +cuff+ wastage%
=kg/DZN
Created by-
Md. Khairul IslamAkash
Email:akashislam94@gmail.com