1. Present Address: Hostel
No.3, Room No.09 FFC
Township Mirpur Mathelo,
Distt.Ghotki Sindh Pakistan.
Mobile: +92-347-3006014,
Tel: +92-723-652301-3366
E-mail: highaimed@gmail.com
Abid Qayyum
Post Applied For : Instrument Technician
EXPERIENCE = 04 years including 2 years apprenticeship
AGE # 28 on 31st
October 2014
Now I have been paying my services as Instrument
Technician at Fauji Fertilizer Company Mirpur Mathelo
(FFC-MM) for one year
THE COMPANY
 Fauji Fertilizer Company(FFC) is well reputed & ISO certified (9001,14001&18001)
company following all international safety, environmental and quality standards,
Plant control system is based on Yokogawa Centum CS-3000 Distributive control
system (DCS) Singapore. Presently I am serving at Ammonia Unit since 08th
April
2013 as a staff maintenance instrument. ST-MNT(INT)
Objective: Challenging and rewarding position in growth-oriented organization,
which offers divers job responsibilities and fully utilize my technical abilities.
TECHNICAL EXPERIENCE (05 years)
09th
April 2013 to onward
Instrument Technician at Fauji Fertilizer
Company Mirpur Mathelo (FFC-MM).
2nd
March 2013 to 6th
April 2013
Instrument Technician on Contract at Fauji
Fertilizer Company Mirpur Mathelo. Also attended
the Annual Turn Around at Fauji Fertilizer
Company Goth Machi (FFC-GM) during this period.
2nd
March 2011 to 1st
March 2013
Apprenticeship Of Instrument Technician at
Fauji Fertilizer Company Mirpur Mathelo.
ACADEMIC QUALIFICATION
EXAMINATION YEAR SUBJECT PERCENT BOARD
Diploma Of
Associate
Engineering
(3 years)
2007 Electronics 76.5%
Karachi (Sindh
Board Of
Technical
Education)
Matriculation 2004 Science 73.8%
Al-Hadeed
Grammer High
School Karachi

2. Skill summary
 Hands on experience of following systems:
 Yokogawa DCS Centum CS3000-R3
 Honeywell Safety System FSC
 Bentley Nevada 3300/3500
• Work experience of Bentley Nevada 3500 Rack software configuration
• Have installation experience of vibration, Thrust & Key phasor probes
 Experience in installation, calibration and maintenance of field instruments and control valves.
 Capability to install tubing of different sizes for instrument air and process impulse lines.
 Experience in understanding standard process plant documentations such as PFDs,
P&IDs, Instrument hook up drawings, Panel wiring diagrams, Logic drawings and
Control loop diagrams.
RESPONSIBILITIES AS INSTRUMENT TECHNICIAN
 Carryout preventive and corrective maintenance of instrumentation and control
system.
 Identify required spares for plant maintenance and notify supervisor for timely
ordering.
 Perform corrective actions and troubleshooting after failure of any instrument.
JOBS AND PARTICIPATION IN NEW PROJECTS AT FFC.
 Installation and commissioning of New Natural Gas Booster Compressor with
instrumentation like Multicore lying, Jb’s schedule preparation and marshaling,
marshaling cabinet and all the instrumentation calibration, mounting and connecting
to the power and process wherever required.
 Installation and commissioning of Yokogawa Centum CS3000 DCS.
 Installation and commissioning of following miscellaneous systems:
• Installation of new Nodes, Nests & I/O Cards in CS3000 YOKOGAWA DCS
• Prepared new Ammonia areas’ DCS loop sheet in Visio
• Prepaid new J.B Schedule of Ammonia area
Miscellaneous Field Instruments
 Worked in number of Turnarounds and shutdowns at FFC-I/III
 Expert in handling miscellaneous types of test equipment and calibrators.
 Capable of installing and calibrating different manufacturers instruments, Following is
the list of instrument practiced:
• Transmitters of Yokogawa, Foxboro, Rosemount, Masonelian
• Specialized level Instruments from;
K-Tek, Rosemount and Masoneilan
• Speed probes and tachometers (speed monitoring) from:
o Jacquet
o Pepper-Fuchs
 Local displays and panel meters from MTL and Redlion.
• Pressure, Level, Flow, Temp switch of CCS,SOR,CELLA
Nova Fima, Megnetrol, Beta
• I/P OF Fisher646, ABB, Andreson, kent Taylor
• SOVs OF Asco, Maxseal, Herion
• CONTROL VALVE OF Fisher, Parcol, Nuovo pignone, bomafa, Glassy, Masonelian
• POSITIONER,S OF Fisher3560,3582,3570 and masonelian Smart positioner
• Work experience of Repapering, installation of Pilot burner’s and fault tracing of BMS.

3. Trainings / Skills acquired:
 Fire Fighting in case of emergency
 Speed and vibration monitoring systems.
 Instrument Air Dryer
 Control Valves and PSVs
 Time Management
 P&I Drawings
 Computer Operating Systems (Windows installation, operating and troubleshooting)
 MS Office (Word, EXCEL. POWER POINT)
 English Language
Test Equipment and calibrators used
 Beta pressure calibrator , Altek loop calibrator, Altek frequency Generator
 Fluke 707,714,715,717 Universal calibrator, Hart communicator 275,375
 Ashcroft pressure gauges, Mamocal, Jofra and Tk-3
 Dead weight and tele tester
PERSONAL PROFILE
Name Abid Qayyum
Father’s Name Abdul Qayyum
Date of birth 31-10-1986
Marital Status Single
Religion Islam
Permanent Address House# C-19/A, Street-2, Qazafi Town, Landhi, Karachi-22.
N.I.C No. 42201-8981307-9
Passport Number Going to be applied can be available within 20 days on urgent
basis