1. Abdullah Hussain AL-Bin Saad
5/12/2016 Chemical Engineer (Process Engineer)
Saudi Arabia, Eastern Region, Al-Mubraz, Dhahran street.
Born In 1990 , ALHasa, Saudi Arabia
from Saudi: from other countries:
0542788878 00966542788878
b.abdullah.b@hotmail.com
Objective:
A challenging position as process engineer that requires creativity, commitment
and hard work at a world-class leading company where I can learn and grow
professionally.
Education:
2008- 2013:
Graduate student at King Fahd University of Petroleum &
Minerals.
Studying for Bachelor of Science degree in Applied Chemical Engineering.
GPA 3.068 out of 4 (Third honor).
Senior Project (2013):
Designing of Acetone production plant with team.
Relevant Project Experience:
Coop Training in Japan (2012) 11 June -12 September:
Process engineer (Trainee) in Chiyoda Corporation(Japan)
Training Outputs:
Modeling refinery system.
Designing of naphtha hydro treating unit.
Simulation of naphtha hydro treating unit
HAZOP Study.

2. Abdullah Hussain AL-Bin Saad
Page 2
Jacobs Zate Engineering(2014 June up to now ) :
Yansab-Ethylene Glycol DBN
Client: SABIC
Title: process Engineer
Start/End Dates: December 2015 – April 2016
Scope/Description: FEED
Responsibilities: PDP Review, working as leader for Pump Calculation as well
as Hydraulics.
Gas Compression Facilities At Ps-3 Stabilizer, Hawtah
Client: ARAMCO
Title: process Engineer
Start/End Dates: January 2014 - september 2015
Scope/Description: Detail design of new Compression train that is similar to the
existing train, new propane chiller unit as well as modification to existing
equipment in order to increase the processing NGL capacity from 11.2
MMSCFD to 22.4 MMSCFD
Responsibilities: LDT Review, Prepare PFD, UFD & P&ID as well as Preparing
Reports for Flare Analysis (using Flare net) & Flare Radiation.
Ammmonia Dosing System, Jubail
Client: SASREF
Title: Process Engineer
Start/End Dates: April 2015 - June 2015
Scope/Description: To Upgrade Ammonia Dosing temporary IBC Container and
barrel pump into permanent container & pneumatic pump equipped with proper
shade and mobile ISO container for proper safety.
Responsibilities: DCL Preparation, LDT Review, Prepare P&ID as well as
filling data sheet.
Ras Tanura Clean Fuels and Aromatics project, Ras Tanura
Client: ARAMCO
Title: process Engineer
Start/End Dates: June 2014 - December 2014

3. Abdullah Hussain AL-Bin Saad
Page 3
Scope/Description: The expansion also added other units to the refinery, diesel
hydrotreater, amine regeneration unit, sulfur recovery unit, and a sour water
stripper. In addition, the project included addition of related utilities, controls,
interconnections to the e
Responsibilities: LDT Review, PFD & P&ID development , Performing
hydraulic calculations , datasheets , tank venting caclulation as well as pump
calculation .
Samsung Engineering( Nov 2013- June 2013 ) :
Riyadh Refinery Clean Transportation Fuels Project (EPC), Riyadh
Client: ARAMCO
Title: process Engineer
Start/End Dates: November 2013 - June 2014
Scope/Description: Install a new unit (Isomerization unit) & new sulfur Guard
bed to reduce sulfur in refinery to 10 ppm and to increase the capacity for
refinery
Responsibilities: LDT Review, Prepare PFD, UFD & P&ID, Datasheets,
Performing hydraulic calculations as well as using flare net model.
Skills
Technical skills:
• Microsoft Office, Mat lab – Expert.
• Computer languages: FORTRAN.
• Simulation : PROII and HYSYS
• Documentation
Personality :
• Leadership
Leader for Family celebrations (more than 325 members).etc.
• Self-motived.
• Willing to work outside the kingdom.

4. Abdullah Hussain AL-Bin Saad
Page 4
• Good communication skills.
• Flexible handling a variety of tasks and shift priorities simultaneously
• Hard Worker.
Short Courses :
• Japanese language.
• Cross -Culture (from BBCS).
• Japanese Sociology.
• Mat-lab Course (2009)
• Environment and sustainability and renewable energy (2010).
• Rotating Equipment (in Aramco-2015)
Languages
Speak, comprehend, read and write both Arabic and English.
References
Available upon request.