1. The document describes the SCB-8970, a 1U rack-mounted network system supporting Intel Sandy Bridge/Ivy Bridge processors. It has support for up to 32GB RAM, 7-15 GbE ports, storage interfaces, and expansion slots.
2. Optional features include IPMI remote management, hardware acceleration, and fiber port expansion modules.
3. The system has dimensions of 440mm x 400mm x 44mm and supports various peripherals and interfaces for local management.
1. 1U Rack-Mount Intel® Sandy/Ivy Bridge Processor and Cougar Point C206 PCH Network
System, 7 Copper GbE, SATA, CF, LCM, PCI, PCI-E
■ Features
Support Intel® Sandy Bridge/Ivy Bridge processors,
LGA1155
Max 32GB Dual-Channel DDR3 1333/1600 Mhz System
Memory
Max 15 GbE Copper ports via PCI-e x4/x1, Support Fiber
Option to 8 Ports
Cryptographic Hardware Acceleration for Option
IPMI Remote Management Interface for Option
Introduction
The SCB-8970 is a 1U rack-mounted hardware platform designed for high performance network service applications. Built with Intel® new
generation microprocessor architecture on 22nm/32nm process technology, the SCB-8970 supports Intel® Sandy Bridge/Ivy Bridge quad-core
processors with Intel® Advanced Vector Extensions and Turbo Boost Technology.
The platform supports four unbuffered ECC or non-ECC DDR3 1333/1600MHz DIMM sockets with memory up to 32GB. In order to provide the
best network performance and best utilization, the powerful storage interfaces include one 3.5" SATA 3.0 6Gbps and CompactFlash™. In order
to enhance network security performance, SCB-8970 affords optional onboard Cavium Nitrox PX cn16xx to give hardware level cryptographic
acceleration which can leave more CPU computing power for higher layer packet processing. The optional IPMI module support web-based UI
for remote management that affords powerful function with KVM over IP, SoL, Virtual Storage Redirection, remote power control and hardware
monitor.
This platform 7 GbE and max to 15 GbE Ethernet ports via PCI-E by 8 on the front-panel. To prevent network problems when the platform
shuts down, SCB-8970 supports two segments of LAN bypass function through WDT and GPIO pin definitions. The front panel also has dual
USB 2.0 ports, one RJ-45 console port and LED indicators that monitor power and storage device activities for local system management,
maintenance and diagnostics. In addition, the SCB-8970 supports one PCI-E by 8 slot, one PCI-E by 8 Golden Finger and one PCI slot.
Sandy Bridge
Xeon/Core i3 CPU
(2~4 Cores)
4 DIMM sockets,
support ECC & DDR3,
up to 32GB
■ Processor System
CPU
Max 15 GbE ports
■ H/W Acceleration
Intel® Sandy Bridge/Ivy Bridge Xeon®, Core™ i7, Core
™ i5, Core™ i3 & Pentium® Dual Core™, LGA1155
Intel® Cougar Point 206 PCH
Up to 5GT/s
AMI® SPI BIOS
■ Storage
Technology
Dual-channel DDR3 ECC/Non-ECC, un-buffered,
1333/1600MHz memory
■ I/O
Capacity
Up to 32GB with 4 DIMM sockets
Chipset
DMI
BIOS
Mainstream Network System
■ Memory
■ Expansion
Onboard Expansion
Slots
GbE Ethernet
LAN Bypass
www.aewin.com.tw
Security Processor
SATA
CompactFlash
Socket
USB
Serial
- One PCI-E x8 slot for expansion module
- One PCI-E x8 golden finger for expansion module
(optional Riser card)
- One PCI-E connector for R199A IPMI module only
- One PCI slot
■ Ethernet
21
IPMI Remote
Management option
Seven RJ45 GbE ports, Intel® 82574L PCI-E x1
2~8 GbE ports (optional expansion module)
Two pairs bypass
Cavium N1610/1620 (optional)
One internal 3.5” SATA HDD bay
One CompactFlash™ Type II
One external USB 2.0 Dual port
One internal USB 2.0 (5x2 pin header)
One RJ45 Console port (COM1)
One internal 5x2 pin header (COM2)
■ Power Supply
Watt
1U ATX redundant power supply
2. ■ Ordering Information
■ Mechanical and Environment
Form Factor
LCD Module
Keypad
LED
Standard
1U rack-mount
one 16x2 LCM
Four buttons keypad
One Power LED (Green)
One HDD LED (Yellow)
Two Bypass LED (Green)
440mm (W) x 400mm (D) x 44mm (H)
(17.3”W x 16.7”D x 1.7”H)
Dimension
W x D x H)
SCB-8970A-A
SCB-8970A-B
SCB-8970A-C
Operating Temperature Operating: 0 ~ 40°C ( 32 ~ 104°F )
1U Rack-Mount Intel® Sandy Bridge Processor and Cougar Point C206
PCH Network System, 11 RJ45 GbE, LCM, PCI, PCI-e x8, bypass
(CB-8970A + R168A)
1U Rack-Mount Intel® Sandy Bridge Processor and Cougar Point C206
PCH Network System, 7 RJ45 GbE, 4 SFP, LCM, PCI, PCI-e x8, bypass
(CB-8970A + R169A)
1U Rack-Mount Intel® Sandy Bridge Processor and Cougar Point C206
PCH Network System, 7 RJ45 GbE, LCM, PCI, PCI-e x8, bypass
Optional
Storage Temperature
-20 ~ 75°C (-4 ~ 167°F)
R168A
Expansion module with 4 GbE RJ45, Intel® 82580EB, PCI-E 2.0
Humidity
10 ~ 85% relative humidity, non-operating,
non-condensing
1pc/CTN, 10kgs,
55.5cm(W) x 54.0cm(D) x 22.5cm(H)
R168B
Expansion module with 4 GbE RJ45, Intel® 82580EB, PCI-E 2.0, 2 pair bypass
Weight
Certification
R169A
Expansion module with 8 GbE RJ45, Intel® 82580EB, PCI-E 2.0
R175A
Expansion module with 4 GbE RJ45, Intel® 82574L/82583V, PCI-E x1, 2 pair bypass
R175B
CE/FCC
Expansion module with 4 SFP, Intel® 82580EB, PCI-E 2.0
R171A
Expansion module with 4 GbE RJ45, Intel® 82574L/82583V, PCI-E x1, 1 pair Bypass
R175C
Expansion module with two 10GbE SFP+ ports, Intel® 82599ES
R199A
1 x SCB-8970 unit
1 x power cord
1 x CD (Manual, Quick installation guide, Utility driver)
Expansion module with 4 GbE RJ45, Intel® 82574L/82583V, PCI-E x1
R188A
■ Packing List
Expansion module with IPMI Remote Management, PCI-E x 1, Aspeed AST2150 Chip
DK001
Cable development kit:
46L-CO5204-00 Cross over cable, 2M
46L-DB9200-B1 Null modem cable, 2M
46L-EC5200-00 Ethernet Cat.5 cable, 2M
46L-IPS200-00
KB/MS cable, 15CM
46L-IUSB01-00
USB cable, 25CM
46L-IVGA01-00 VGA cable, 20CM
46L-RJDB91-00
RJ45 to DB9 cable, 2M
* Note:All specifications are subject to change without prior notice
LCD display 16 x 2 characters
& 4 buttons keypad
Console
USB 2.0
7 x GbE
System FAN x 4
3.5 HDD Bay
Power Switch
AC input
Power supply
401.20
■ Dimensions
44.00
480.00
465.00
440.00
www.aewin.com.tw
22