Your SlideShare is downloading. ×
0
http://designforeveryone.howest.be/
FREDBRIL 3.4.4                              € 114                    Approximately 1 hourhttp://prismabril2011.blogspot.co...
ASSEMBLY MANUAL    http://designforeveryone.howest.be/
FREDBRIL 3.4.4BILL OF MATERIAL- 3D printed frame (€50)- Leather legs   (€10)- Magnets        (€10,90)- Prisms         (€34...
1    FREDBRIL 3.4.4    PRINT        out the measuring tool template    which         is        donwloadable        at    h...
22    FREDBRIL 3.4.4    AFTER          A few weeks you will receive a    package that includes a personalized frame,    ba...
3    FREDBRIL 3.4.4    STITCH          the leather legs so they form a    little back to put the magnets in.    Choose a c...
44    FREDBRIL 3.4.4    PUSH        four magnets in each leather bag    with a small screw driver unitll they have a tight...
55    FREDBRIL 3.4.4    GLUE       the leather legs to the printed frame    with contact glue. To ensure the strength, sti...
66    FREDBRIL 3.4.4    REMOVE             the two prisms from the    original frame, by sliding a thin knife under the   ...
77    FREDBRIL 3.4.4    CUT       a piece of shrink tube (2 x 25mm) and    put slide them over the legs of your glasses. I...
TECHNICAL ADDENDUM      http://designforeveryone.howest.be/
TEAM CONTACTS   http://designforeveryone.howest.be/
JEFF@GMAIL.COM  TEL +32474 60 27 13 INFO@JORISBELLENS.BE   TEL +32494 64 48 16ERGOMENEN@HHR.BE  TEL +3256 52 20 27  FDERON...
Montageplan_Fredbril
Montageplan_Fredbril
Upcoming SlideShare
Loading in...5
×

Montageplan_Fredbril

616

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
616
On Slideshare
0
From Embeds
0
Number of Embeds
6
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Montageplan_Fredbril "

  1. 1. http://designforeveryone.howest.be/
  2. 2. FREDBRIL 3.4.4 € 114 Approximately 1 hourhttp://prismabril2011.blogspot.com// Jeff Stubbe / Joris Bellens http://designforeveryone.howest.be/
  3. 3. ASSEMBLY MANUAL http://designforeveryone.howest.be/
  4. 4. FREDBRIL 3.4.4BILL OF MATERIAL- 3D printed frame (€50)- Leather legs (€10)- Magnets (€10,90)- Prisms (€34)- VW_1 XBPT Shrink tube with glue (€2,5)- Lighter- Sewing kit Scissors – Sewing kit- Lighter Shrinking sock - Prisms Leather legs - 3D printed frame
  5. 5. 1 FREDBRIL 3.4.4 PRINT out the measuring tool template which is donwloadable at http://prismabril2011.blogspot.com/. This tool will help you to measure the distance between your eyes. Follow the instructions on the template. After succesfuly measuring the distance between your eyes, contact IDC (Industrial Design Center). lieven.de.couvreur@howest.be Measuring tool 10 Minutes Printer - Scissors - Glue - Box of corn flakes 0,05 for printing the tool
  6. 6. 22 FREDBRIL 3.4.4 AFTER A few weeks you will receive a package that includes a personalized frame, based on the distance between your eyes, and leather legs. These leather legs will be personalized by engraving your name. 2 Minutes Scissors or knife Printed frame – Leather legs 50 + 10 + 5
  7. 7. 3 FREDBRIL 3.4.4 STITCH the leather legs so they form a little back to put the magnets in. Choose a color you like to personalize it. 15 min Sewing kit Sewing kit 0
  8. 8. 44 FREDBRIL 3.4.4 PUSH four magnets in each leather bag with a small screw driver unitll they have a tight fit. 30 seconds Little tool to push Magnets 1,76
  9. 9. 55 FREDBRIL 3.4.4 GLUE the leather legs to the printed frame with contact glue. To ensure the strength, stitch an X through the holes in the leather and the frame. Put the frame away untill the glue is dry. (±24 hours) 10 minutes to glue and stich - 24 hours to dry Sewing kit - Glue Glue
  10. 10. 66 FREDBRIL 3.4.4 REMOVE the two prisms from the original frame, by sliding a thin knife under the prisms. Now put them in the printed frame without any glue. Normally the friction between the prisms and the frame is enough to hold them. 1 minute Prism glasses (http://www.medesign.co.uk) 2 prisms 34
  11. 11. 77 FREDBRIL 3.4.4 CUT a piece of shrink tube (2 x 25mm) and put slide them over the legs of your glasses. If needed detach the legs. Slide two magnets in between the outer side of the legs and the shrinking tube. Make sure to check the polarity of the magnets so they attrack the magnets inside the leather legs. Hold a lighter to the tubes to shrink them, while heated the tubes will release a glue that will fix the magnets to the legs of the glasses. Note: The glue inside the shrinking tubes is easy removable . There is no risk of damaging your glasses. 5 Minutes Lighter Shrinking tube- Magnets 4 Magnets – 2 pieces of shrinking tube 2,5
  12. 12. TECHNICAL ADDENDUM http://designforeveryone.howest.be/
  13. 13. TEAM CONTACTS http://designforeveryone.howest.be/
  14. 14. JEFF@GMAIL.COM TEL +32474 60 27 13 INFO@JORISBELLENS.BE TEL +32494 64 48 16ERGOMENEN@HHR.BE TEL +3256 52 20 27 FDERONNE@HHR.BE TEL +32476 43 96 87 http://designforeveryone.howest.be/
  1. A particular slide catching your eye?

    Clipping is a handy way to collect important slides you want to go back to later.

×