3. Uses:
1. Can be used as a shelf for books or a ledge.
2. To encourage kids to be organised .
3. For decoration.
4. Can also be used as a storage bar.
5. Provides additional spots for your accessories and
equipments when you don't have enough space.
CTWP
4. Materials and tools used Machines used
Angle bracket Belt sander
Hammer Sewing machine
Jigsaw Infrared Oven
Wire Vacuum surge tank
Knots and Fasteners Grinding machine
Cotton Drill press
Leather Router machine
Polypropylene plastic
Plaster of Paris
Cast cutter ( Oscillation Blade )
Velcro ( Hook and Loop )
Adhesive
Drive punches
Gloves
7. Fab·ri·ca·tion
the action or process of manufacturing or inventing something.
1.Plaster casting
• Casting by POP, water: plaster = 1:2
• Casted onto the right hand and left hand
each on both subjects.
2.Modification
• Positive and negative model
• Measured from the head of ulnar
Fabrication process
9. 3. Thermoforming
a manufacturing process
where a plastic sheet is
heated to a specific
temperature, for the
formation of a particular
shape. It is then trimmed to
create a usable product.
- Specific temperature 170-
185 Degree Celsius, for
polypropylene plastic.
11. First cut and then Grind the plastic
by using Sanding drum and felt
cone. ( For the board )
4. Gliding
12. 5. Leather and sewing.
- Use wire and cotton to make flexible gloves.
- Velcro strap
13. 6. Fastening and finishing
- Usage of contact adhesive.
- Knots and fasteners.
Attach the angle bracket
to the socket, by fasteners
and knots.
14. Problems and Solutions, during fabrication process.
Mold and cast two arms of the same person/subject, instead of
molding one side of arm ; for easy work process.
In order to make this specific DIY project model faster
and easier ; we should make use of a cone or cylindrical
shaped object for the arm, instead of using measurements
of human arm. This could have saved a lot of time.
Recommendation for future work…