Info about Loopless Triggering Radar (LTR). GLD4-2S

2. Loopless Trigger Radar (LTR) with Non Invasive Dectector (NID)

3. NID with LTR Artists impression

5. LTR set-up for speed measurements

6. LTR set-up for single or multiple lanes

7. LTR on overhead mast arm

8. Vx A B C Start measure ment at A Triggerpoint at B End measurement C LTR vehicle measurement The footprint length can vary from roughly 6 to 25 meters depending on different installation situations. Receding vehicle

9. Vx C B A Approaching vehicle LTR vehicle measurement The footprint length can vary from roughly 6 to 25 meters depending on different installation situations. Start measure ment at A Triggerpoint at B End measurement C

10. LTR virtual loop

11. NID operation A-speed V-speed LTR 1

12. NID in MCS or GTC-D Up to 4 individual lanes can be connected to the Non Invasive Detector (NID). The NID is pin compatible with the GLD4-2S detector and can be used in a MCS or GTC-D.

13. LTR speed monitoring - latest design

14. LTR speed only – test results

15. LTR set-up for red light monitoring

16. LTR red light - results

17. LTR testing in Switzerland with the approval institute

18. Testing in Switzerland with the approval institute

20. Reference tests

21. Reference tests

22. Front measurement set-up Switzerland

23. LTR set-up

24. Rear measurement set-up USA (Beverly Hills)

25. LTR alignment camera

26. Front measurement set-up Switzerland

27. Front measurement set-up Switzerland - alignment

28. Front measurement set-up Switzerland - photopoint

29. Front measurement set-up Switzerland - results

30. Protecting people in motion