1. Anshul Bansal
620 Peachtree Street, Apt 412, Atlanta GA 30308
(404) 667-3654 • anshulbansal@gatech.edu
Objective
Seeking a new-grad full time position in the domain of VLSI design or computer architecture utilizing my skills and
knowledge in the field
Education
Georgia Institute of Technology Atlanta, GA, U.S.A. • Masters in Electrical and Computer Engineering,
December 2014 • GPA: 4.0 • Coursework: Advanced VLSI Systems · Advanced Computer Architecture · Digital
Systems Test · Advanced Digital Systems Testing · Advanced Micro-architecture · Advanced Topics in Memory
Systems · Parallel and Distributed Computer Architecture
PEC University of Technology Chandigarh, India • Bachelors in Electronics and Electrical Communication
Engineering, 2013 • GPA: 9.67/10.00 • Department Rank: 2/74
Skills
• Programming Languages: C, C++, Verilog, Python, Tcl
• Simulation Tools: PrimeTime, Virtuoso, LabView, MultiSim
• Others: GNU/Linux, LATEX, Robot Operating System(ROS)
Internships
Qualcomm Technologies Inc., San Diego (May-Aug 2014)
Engineering Intern
• Worked with the SoC implementation team in performing timing constraint checks at chip level
• Validated CMS constraints for some hard macros for top flat STA runs
• Created Tcl scripts for timing checks for various blocks in PrimeTime
• Debugged issues related to unconstrained or no-paths by co-relating DC netlist and timing libs
• One of the top 10 finalists in the company wide intern IdeaQuest event
University of Bremen, Germany (June-July 2012)
Research Assistant
• Assisted in the development of an autonomous sailing boat
• Interfaced inertial measurement sensors and performed on-chip data filtering using Kalman filter
• Multiplexed the GPS receiver with the other sensors to get GPS data and track co-ordinates
Indian Institute of Technology (IIT) Madras, India (Jan-May 2012)
Research Assistant
• Worked on Pioneer P3-DX and iRobot Create robot development platforms
• Developed robot control through human gestures using Microsoft XBOX Kinect
Indian Institute of Technology (IIT) Bombay, India (June-July 2011)
Summer Intern
• Developed a robot aided industrial warehousing solution
• Established co-ordination among robots using the Zigbee protocol
Projects
• Deductive fault simulator to simulate stuck-at-faults in a circuit
• Multi-level cache simulator with stride prefetch
• Dynamic scheduler based on Tomasulo’s Algorithm with Reorder Buffer
• SRAM system design in Virtuoso while focusing on power-performance optimization
Undergraduate Thesis
TeRo: Telepresence Robot
• Developed a telepresence solution based on Intel Atom Kit SYS9400-ECX. The system used a ROS
environment to communicate and transfer data
• Implemented remote control of the robot using gestures by employing Microsoft XBOX Kinect as the sensor
Scholarships
• DAAD WISE Scholarship 2012, for Summer Internship at University of Bremen, Germany
• Merit Scholarship, in under-graduation for excellent academic performance
Leadership Roles
• Vice President, Vyom (College’s Annual Technical Fest), 2013
• General Secretary, College’s Robotics Society, 2013
Keywords: VLSI, electrical, ECE, masters, gradutate, new grad, design, architecture, implementation, PrimeTime,
ASIC, STA, timing analysis, verification, validation