Was estabilished in 2009 in Jakarta as private company. We offer comprehensive, Cost effective high solutions as a general contractor/ Pipe-Flange-Fitting-Valve supplier in Indonesia, Focusing on Oil and Gas, Petrochemical, Cement Industry, Power Plant and Pulp & Paper.

1. Keep Your Trust
MINING INDUSTRY OIL AND GAS CEMENT INDUSTRY
PULP & PAPER
POWER PLANT
PETRO CHEMICAL
REFINARY
PT. SUMBER KARYA LESTARI PRATAMA
Jl. Patriot No. 116 C, Jakasampurna
Bekasi 17145
Telp. (021) 889 56466
Fax. (021) 889 56467
Email : sales@sklp.co.id
marketing@sklp.co.id
Website : www.sklp.co.id

2. PT. Sumber Karya Lestari Pratama
Was estabilished in 2009 in Jakarta as private
company with company registration number:
AHU-07249.AH.01.02 and NPWP No.
02.885.719.1-034.000
We offer comprehensive, Cost effective high
solutions as a general contractor/ Pipe-
Flange-Fitting-Valve supplier in Indonesia,
Focusing on Oil and Gas, Petrochemical,
Cement Industry, Power Plant and Pulp &
Paper.
VISION
Strengthen our service quality by improving,
implementing, evaluating, and maintaining
the qulity management system improvement
and strive in excellent for best practice.
MISSION
• To Provide quality product and service while
meeting customer requirements.
• To Provide competitive price and commited
for on time delivery services.
MINING INDUSTRY
OIL AND GAS
CEMENT INDUSTRY
PUPL AND PAPER
POWER PLANT
PETROCHEMICAL
REFINARY
Email : sales@sklp.co.id
marketing@sklp.co.id
Website : www.sklp.co.id
SUPPLY PRODUCTS
Fitting, Valve, Pipe Duplex Supply
Customer: CONOCOPHILLIPS
Valve’s Supply
Customer: SAE
Belt Brush Conveyor
Customer: RAPP
Casting Filter Oil Casting
Customer: BPSA
Fabrication Generator Base
Customer: BPSA
Heat Exchanger Part
Customer: SELDAVINTO
Valve’s Supply
Customer: PT. SAE
Gate Valve Recondition 48”#150
Customer: Geothermal
Brake Container Crane
Customer: RAPP Port Buatan
Rebuild Conveyor Screw
Customer: TelPP
Loose Gear Box Crane
Customer: RAPP
Recondition Gearbox Agitator
Customer: Kujang
Adjuster Bolt HDG
Customer: Berau Coal
Roll Pulley SBR
Customer : PKN Kaltim

3. PROJECT
This PRESS MACHINE is a machine that has a very
good quality and have optimal performance.
This machine offers a minimum price but maximum result, so
it can provide substansial benefit for customer.
This machine made by experts and designed very carefully
according to ASME standard.
(KICI Indonesia)
FOUNDATION RAIL is the cradle for the engine
generator made with a standard based on ASME. Created
by experts and has the strength and assurance of high
quality products.
Combining raw material between carbon steel and wear
resistance plate material, and process welding by FCAW
complete with WPS, PQR and ITP documentation.
Machinery process by CNC HBM then produce high
precision products.
(BPSA / PLN Lombok)
Casting, machining and assembly of CRUSHER
SCREEN. Made from manganese casting to
improve quality and add optimal performance.
Diamond type HEAD PULLEY, shell of pulley
made from seamless pipe, flanges from material
carbon steel grade S45C, and shaft material alloy
grade 4340. Covered by SBR shore 60 for finish.

4. As an agent EDV Valves of UK we
capable to supply ball valve, check
valve, globe valve with range of size
1”-24” ASME #150-#2500 with
various of connection and we
concentrated on F51 / F55 Duplex
and super duplex NACE MR 0175
With full support from our principal in
Europe SKLP capable and widely supply
of :
- Fittings (elbow, tees, cap,etc)
- Bar material
- Branch fitting (weldolet, sockolet,
threadolets, plug, etc.)
- Flange (WN, SO, SW, threaded,
bleeder type) to ASME and API std.
Duplex and Super Duplex
UNS Grade S31803-S32205-S32750
FLANGES & FITTINGFLANGES & FITTINGFLANGES & FITTINGFLANGES & FITTING
As an agent Petropipe International
of UK, SKLP already widely supply
seamless and welded pipe
with range of size 1”-12” DSS SMLS
A790 UNS Duplex and Super Duplex
UNS Grade S31803-S32205-S32750
NACE MR 0175
PIPEPIPEPIPEPIPE
DUPLEX VALVEDUPLEX VALVEDUPLEX VALVEDUPLEX VALVE
PROJECT

5. ID FAN
Made from wear resistance materials with
grade 400, rolling process use special
methods, welding by FCAW and finishing
by CNC Vertical Milling
EQUALIZING BIN TANK
SPROCKET DECK
Made from carbon steel and wear
resistance plate grade 500.
diameter 4000 mm and high
5200mm.
It used for wood chipper storage.
Made from forging materials 17CrMo6
and threatment surface induction after
machining process, the sprocket cut into
two parts by CNC wirecut.
Installed on slasher deck and used to
pull the woods to barking drum.
PROJECT
DISC CHIPPER
Recondition disc chipper and replacement
shaft. Rebuild disc by FCAW and welding
wire which compatible specification. Re-
tapped and install recoil on bolting holes.
GATE VALVE
Recondition flanges facing, rebuild by
FCAW and machining gate disc on VTL
CNC machine. Replace new rod screw
by allow steel material and finishing
grinding.

6. PROJECT
VESSEL
GEAR BOX
Maker various type of gears and
recondition gearbox :
SOP of reconditon :
• Propose recommendation
• Recondition housing
• Recondition bearing seat
• Machining gears
• Grinding gears
• Treatment
• Assembling
• Testing without load
• Proper packaging
As PHE agent which complete
with U, S & US ASME
certification we capable to
make various of Vessel & tank :
• Vessel non pressure
• Pressure Vessel
• Heat Exchangers
• Column, chimney
• Ducting
• etc.

7. We are official marketing agent for Perkasa Heavyndo Engineering, SKLP to manufacture
various of job.
MACHINE FACILITIES
No. MACHINE TYPE CAPACITY
1 CNC Horizontal Boring M/c SKODA - UK 12,000x3,800x1,600 mm
(x,y,z)
2 CNC Boring M/c SKODA W 160 HA - UK 10 m x 3 m x 1.6 m
(L x W x H)
3 CNC Boring M/c SCHEISS FRORRP 10 m x 4.5 m x 1.2 m
(L x W x H)
4 Horizontal Boring M/c SKODA W 166 H 6 m x 3.5 m x 1.6 m
(L x W x H)
5 Horizontal Boring M/c ASQUITH 10 m x 4.2 m x 1.0 m
(L x W x H)
6 Vertical Boring M/c CRAVEN 7700 mm(Dia.) x 4000 mm (H)
Weight : 150 Tonnes
7 CNC Lathe CRAVEN 30 Feet 2 m x 9 m
Weight : 90 Tonnes
8 Conventional Lathe CRAVEN 2 m x 7.5 m
Weight : 90 Tonnes
9 Conventional Lathe Heylegensteadt SP Facing
Lathe
2.2 m x 3.5 m
Weight : 50 Tonnes
10 CNC Flame Cutting M/c ESAB 18000 mm x 2500 mmx 75 mm
(L x W x Thk)
11 Shearing M/c Mariani 2500 mm x 25 mm
12 PWHT Furnace PWHT Furnace • Stress Relieving :
22 m(L) x 5.5 m(W) x 5.5 m(H)
• Annealing :
12.5 m(L) x 5.5 m(W) x 2 m(H)

8. MACHINE FACILITIES
Located in Cengkareng, West Jakarta and Bekasi West Java
where our supporting workshop are dedicated to running
the activities
No
.
TOOLS NAME BRAND SIZE
1 CMM PORTABLE CIMCORE 2800 mm
2 HIGH GAUGE (DIGIMARE CX1) MAHR 24”
3 HARDNESS TESTER GNEHM HRD 150
4 HARDNESS TESTER PORTABLE TIME HRC/HRB
5 VERNIER CALIPER MITOTUYO 0-1500 mm
6 DEPTH CALIPER MITOTUYO 0-200 mm
7 OUTSIDE MICRO MITOTUYO 0-400 mm
8 INSIDE MICRO MITOTUYO 8-100 mm
9 MODUL RADIUS MITOTUYO 8-100 mm
10 BORE GAUGE MITOTUYO 160-235 mm
11 MEASURING PROJECTOR CARMAR 50x150 mm
TOOLS FACILITIES
No
.
MACHINE TYPE CAPACITY
1 CNC Turning TURN 20 - Japan 200 x 500 mm
2 Vertical Machining Center WF3-12K -Germany 750 x 1200 x 2000mm
3 CNC Wire Cut AQ 325 L - Japan 220 x 250 x 350 mm
4 CNC EDM CM 434 C - Taiwan 250 x 300 x 400 mm
5 Horizontal Lathe Geminis – Germany 1500 x 1200 mm
6 Surface Grinding TODH3 - Germany 600 x 2000 mm
7 Cylinder Grinding Naxos Union - Germany 500 x 3000 mm
8 Planner Milling R1200 - Taiwan 1200 x 4000 mm
9 Horizontal Shapping Dainichi - Japan 600 x 400 mm
10 Universal Frais / Mill Sajo/ Strong - Sweden 300 x 1250 mm