Bell-Camp Inc. is a custom steel fabricator located in Ingersoll, Ontario. It has a variety of certifications including ISO9001:2008, ASME, CWB, TSSA, and CSA Z266. It has extensive equipment for metal fabrication like a CNC plasma table, press brake, sub arc welding, band saw, and overhead cranes. Bell-Camp fabricates products like pressure vessels, piping, ductwork, burners, stacks, flares, hoppers, bins, and silos for industries like mining, cement, oil and gas, pulp and paper, and chemicals. It prides itself on quality and has an in-house quality control program.

1. Certifications
ISO9001:2008,Certified
ASME Manufacture of Pressure Vessels
CWB Certification of Companies for Fusion
Welding of Steel,CSA Standard W47.1
Certificate of Authorization,The National Board
of Boiler & Pressure Vessel Inspectors
TSSA:Manufacture of Pressure Vessels
TSSA:Repair and Alteration of Boilers,Pressure
Vessels,Piping and Category A,B,C,D,E,F and
H type fittings
TSSA: Fabrication and Assembly of Power Piping
TSSA:Fabrication and Assembly of Process Piping
CSA Z266 Oil & Gas Pipeline Systems Approved
P 519-485-3120 F 519-485-3205
E info@bellcampinc.com
w w w . b e l l c a m p i n c . c o m
Equipment Capabilities
At Bell-Camp,the most up to date metal
fabrication equipment and design know
how is brought to bear on every project –
from the raw material to shipping and
delivery.From an in-house AutoCad system
producing shop detailing solutions,to
advanced equipment,like our CNC Press
Brake and CNC High Definition Plasma
Table,we ensure every part of the process
meets the highest standards.
Certifications
Bell-Camp has been Canadian Welding Bureau approved
since 1988 and has continued to advance by achieving our
ISO 9001:2008 registered Quality Management System
designation. We are also authorized to manufacture Pressure
Vessels with the ASME‘U’Stamp authorization and certified
to manufacture CSA B51 Pressure Vessels and CSA B31.1 &
B31.3 by the TSSA.
Bell-Camp's customers are located all over the world. We are
therefore familiar with European drawings and quality
standards as well as the American Welding Society D1.1 and
American Petroleum Institute certifications.
Custom Steel Fabrications
Pressure Vessels
Pressure Piping
Plate and Structural Steel
Sandblasting and PaintingPO Box 278, 543925 Clarke Road, Ingersoll, Ontario N5C 3K5
w w w . b e l l c a m p i n c . c o m
Equipment List Specifications
High Definition CNC Plasma
Cutting Table
Capable of cutting 4" thick plate,
12 ft wide x 34 ft long
1" Plate Roller 10 ft wide
CNC 15 ft Press Brake 450 Ton Capacity x 15 ft
Sub Arc Welding 16' Maximum Diameter
Semi-Automatic Welding
Equipment
Self guided welding modules
Hyd-Mech 30" Band Saw Cut materials 30" x 30"
Angle Roller 5" Angle
10 Ton Overhead Cranes 60 ft Spans
5 Ton Cranes 72 ft Span,and 40 ft Spans
Modern Heated Painting Facility 3,000 sq ft
Modern Shot Blast Facility 2,000 sq ft
Large Fabrication Space 45,000 sq ft Building
Onsite Drafting Facilities AutoCAD & Solid Works

2. Quality Delivered
for over 50 Years
Since 1962,Bell-Camp
Manufacturing Inc.has
delivered the highest quality
custom steel fabrications
to customers in a broad
range of industry sectors –
from Mining and Cement
to Oil & Gas.
Our Facility Can Handle Large Fabrications
From our 50,000 sq.ft.facility in Ingersoll,Ontario,
we fabricate custom steel structures in excess of 100
tonnes from materials ranging from carbon and
stainless steels to various specialty metals.Sitting
on 40 acres,we still have plenty of room to grow
and will build as required!
Ductwork
Our modern equipment
and experienced
manpower allow us to
fabricate ductwork to suit
any application.Bell-Camp
is certified to manufacture
carbon steel or stainless
steel ductwork which can
be lined with ceramic,
rubber and polyurethane.
Burners
Using both carbon steel
and multiple grades of
stainless steel,we
fabricate Burners used in
the Pulp and Paper and
Lime industries.
Custom Solutions
Bell-Camp Manufacturing Inc.offers expertise in the
design and fabrication of a wide variety of custom
solutions including:
Hoppers,Bins & Silos
Plates are cut in-house
and fabricated according
to our clients’specifications.
Once fabricated,they
are sand blasted and
painted onsite.
Specialty Projects
As a custom fabricator,we
welcome the opportunity
to build your unique project.
With our in-house capabilities,
we can offer you a high
quality end product,
at a competitive price.
Custom Stacks & Flares
Utilizing our in-house plate
rolling capacity and large
sub-arc welding system,
allows us to build stacks in
various sizes and material
types,as well as the
platforms and ladders.
Pressure Vessels
Bell-Camp is ASME certified
for the design and
manufacture of carbon or
stainless steel pressure
vessels and piping used in
the oil and gas,pulp and
paper,and chemical
industries.
Quality Assurance
Bell-camp is ISO9001:2008 registered and
also meets ASME quality requirements. We
have an in-house Quality Control Manager and
several Canadian Welding Bureau (CWB) Shop
Supervisors on Staff. Through our extensive
network of highly qualified NDE inspection
agencies we are able to meet any testing that
may be needed by our customers.All welders
are certified by the Canadian Welding Bureau
Standard W59 and ASME.
We believe our quality standard
is the reason that 80% of our
sales are based on repeat
business.