There are two main reasons why companies and individuals typically use concrete scanning services. In some cases, maps have not been kept updated or have just gotten lost, so nobody really knows where pipes and wires run under the surface of roads, grounds, and buildings. In other cases, the location is known, but nobody knows the condition of these fixtures or what lies around them.

2. There are two main reasons why companies
and individuals typically use concrete scanning
services. In some cases, maps have not been
kept updated or have just gotten lost, so nobody
really knows where pipes and wires run under
the surface of roads, grounds, and buildings.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

3. In any case, these services
are very effective. It is
almost like being able to
call on Superman to use
his X-Ray vision to see
exactly what lies under the
ground. The use of this
modern technology can
help save money and time,
and it might even prevent
property damage and
injuries.More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

4. What is Concrete Scanning?
Today's technology includes three
basic things:
 Radar that penetrates the ground
 X-ray cameras that can see what is inside
of pipes and other fixtures
 Cameras that can travel through pipes
and bring back live remote pictures
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

5. Concrete scanning is also called sub-surface
investigation. It utilizes cameras that can
actually travel underground through pipes and
other utility fixtures. These cameras can
detect problems like broken pipes, cracks, or
backups.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

6. Additionally, the cameras can
be used to report on pipes in
satisfactory condition. This
way, nobody needs to go to
the trouble and expense of
digging into the ground when
it actually is not needed.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

7. The biggest reason to use
this technology is that it is
not invasive. It is the same
as having a doctor suggest
getting an X-RAY or similar
test before he suggests
operating. It is possible to
see what is going on under
the ground without actually
digging up anything.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

8. This technology prevents damage to
fixtures that may be in good condition and
do not need any work done.
This technology saves money because no
work crews are needed to dig around pipes
and electronic fixtures just to check up on
them.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

9.  This means that property damage, injuries,
and expenses are minimized. Only work
that actually needs to get done will get
done because you and your crews have a
way to see underground.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

10. Even if you know that you
have an underground
problem, you may not know
the best way to access the
problem. If you use GPR,
your crews will know the
most efficient way to get to
the source of the problem
without damaging structures
or fixtures around a broken
pipe or damaged wire.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

11. Also, knowing the exact
source of the problem can
help your engineers figure
out the safest and most
efficient way to fix it before
you ever need to start
boring into the earth. It can
save you money and
reduce the chance of
making mistakes that you
will end up paying to fix
later.
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection

12. It only makes sense to plan out any work you
need to do. That way, you can be sure of
having the right crews, machines, and supplies
for your job. Contact a company that can
supply underground scanning services to see
what they can do for you before you need to
start digging!
More info on:
http://www.scanconcrete.com.au/concrete-scanning/conduits-and-rebar-location-detection