The document discusses various computer-aided design (CAD) software used in civil engineering and construction projects. It provides information on AutoCAD, STAAD, Revit, and describes how they are used to design structures, plan projects, estimate quantities and costs, and generate construction documents. Key advantages of these software include time and cost savings, improved accuracy, and the ability to simulate designs before physical construction.
8377877756 Full Enjoy @24/7 Call Girls in Nirman Vihar Delhi NCR
AutoCAD and Revit Software for Structural Planning and Design
1.
2.
3.
4. AutoCAD is a commercial computer-aided design
(CAD) and drafting software application. AutoCAD is
use to made 2D images. In civil Engineering it plays a
great role for planning. In hand drawing it takes a lot
of time to make a plan but in AutoCAD we draw a
plan in very less time. So engineer use to prefer proper
planning. AutoCAD provides a proper planning for a
plan.
5. Advantages:
Save time and money
Reduce error and enhance accuracy for work
Provides alternatives
Makes transfer of data copy
Reduce problem in design before it exists in reality
Controllable and manageable
Provides custom solutions
Helps in creating proper database
Standardized drawings
Improved quality of design
6. Plan working in AutoCAD
Ground Floor:
i. Sitting Area
ii. Master Bad Room
iii. Bad Room
iv. Parking Area
13. Structural engineering are responsible for engineering design and analysis.
Entry-level structural engineers may design the individual structural elements
of a structure, for example the beam, columns, and floors of a building. More
experienced engineers would be responsible for the structural design and
integrity of an entire system, such as building.
16. Designing
Geometry: Modelling of the structure geometry consists of two steps:
o Identification and description of joints or nodes.
o Modelling of members or elements through specification of connectivity
between joints.
18. Defining Properties: Property is the shape given to each member
of the structure. The rectangular property is given to the structure
to give more strength to each member to bear load.
20. Supports:
Supports is given to the structure to give it a strength. A fixed support is given to
the structure.
Load and Definition:
There are many types of loads which are given in structure with the help of
Indian Standard code which are IS 875:1987 part 1 for dead load, IS 875: 1987 part 2
for live load, and combination load with factor of safety.
22. Analyses:
An analysis is use for performing all commands given to the structure due to
which we can check our property, loads, supports etc. work or will not work.
24. Plates:
Plates are made instead of floor which are more beneficial then a normal slab.
Concrete Design:
IS 456:2000 is used for concrete designing. In concrete designing we gives value
of FC (Characteristic Strength of concrete), Fy (Yield Strength of steel) Main, Fy
Secondary, Design beam, Design column, Design elements, etc.
25.
26.
27.
28. STAAD Foundation is an exhaustive analysis, design and drafting solution for
a variety of foundations. These include general foundation types such as
isolated, combined footings, mat foundation, pile caps, octagonal, strap and
slab on piles as well as plant foundation such as vertical vessel and heat
exchanger foundations.
30. Advantages:
• Easily model complex or simple footings, such as plant foundations supporting
vertical vessels, horizontal vessels, tanks and other footings.
• Quickly model common foundation such as isolated, combined, strip, pile caps, and
many more.
• Simplify challenging scenarios such as vibrating machine foundation, lateral analyses
of piers, or mat design using FEA (Finite Element Analysis).
• Efficiently use your structural model with the foundation model through integration
with STAAD Pro., including automatically synced changes in both models.
32. Result Summary
Footing No.
Left Overhang
(m)
Right Overhang
(m)
Length
(m)
Width
(m)
Thickness
(m)
1 1.125 1.125 11.165 2.750 0.500
2 1.000 1.000 10.915 2.500 0.500
3 1.000 1.000 10.915 2.500 0.500
4 1.000 1.000 10.915 2.500 0.500
Footing No. Footing Reinforcement
- Main Steel Top Main Steel Bottom Secondary Steel Top Secondary Steel Bottom
1 Ø12 @ 55 mm c/c Ø12 @ 185 mm c/c Ø12 @ 185 mm c/c Ø12 @ 185 mm c/c
2 Ø12 @ 130 mm c/c Ø12 @ 180 mm c/c Ø12 @ 185 mm c/c Ø12 @ 185 mm c/c
3 Ø12 @ 65 mm c/c Ø12 @ 180 mm c/c Ø12 @ 185 mm c/c Ø12 @ 185 mm c/c
4 Ø12 @ 95 mm c/c Ø12 @ 180 mm c/c Ø12 @ 185 mm c/c Ø12 @ 185 mm c/c
33.
34. Autodesk Revit is building information modeling software for architects,
landscape architects, structure engineering and contractors developed by
Autodesk. It allows users to design a building and structure and its components
in 3D, annotate the model with 2D drafting elements, and access building
information from the building models database.
35. Advantages:
Preview the future home in 3D BIM (Building Information Modeling) modeling
Quick changes to Design, No repetitive Tasks
Vast Library of Parametric building components
High quality construction documents
Accurate estimation of qualities and cost
Improved coordinates
High quality of flexibilities.
41. A design engineer’s responsibility should include assuring the structural safety
of the design, details, checking shop drawing. The detailing is very important
not only for the proper execution of the structure but also for the safety of the
structures. Detailing is necessary not only for the steel structures but also for
the RCC members as it is the translated result of all the mathematical
expressions and equations.
45. The process of measuring quantities of material from drawings and
specifications prepared by architects, engineers, and other designers is known as
quantity takeoff. Traditionally, construction cost estimators have used paper-
based method to perform digital quantity takeoff, which is faster, easier and
more accurate than paper-based methods.