1. Plywood
Plywood is a wood product manufactured out of many sheets of veneer, or plies,
pressed together and glued, with their grains going in opposite directions. It tends to
be extremely strong, (our main core veneers are poplar,eucalyptus and pine), and is
treated in many different ways depending upon its intended application.
Plywood production can typically be divided into three manufacturing stages:
veneer manufacture; clipping, drying and up-grading; and panel layup, pressing and
finishing. The more details: Plywood thickness: 1.5mm-32mm; Plywood size:
1220*2440,1220*2500......(4*8 is the common size); Plywood moisture:6-18%;
Plywood grades: according to the veneer on both face and back. Splits, knots, knot
holes and resin pockets are cut or routed out before being filled with putty or pathed.
Plywood can be processed futher with tongue and groove edges; over laid, given a
textured surface finish; and edge jointed to give oversized boards.
Plywood is very popular material in home building and furniture, particularly for
its strength as a roofing underlayment. Plywood can be divided into outside use and
interior use.Our plywood can be divided into commercial plywood, film face plywood
and fancy plywood
In addition, our plywood is famous for its premium quality. Quality is our
plywood’s spirit. In plywood manufacturing process, original material would be
picked out twice times. Firstly, face and core veneer would be both checked and
picked out. Secondly, we view the glue as important as our blood , the glue would be
detected many times to be good quality before used. Thirdly, both sides of the based
board would be repaired twice times. Last, in packing process, the production would
be checked two more times before sent to our customers.
This is our plywood, is your plywood,too!
Contact:Jessica
Phone:+8613805393426
Whatsapp:13805393426
Shandong Liantuo Wood CO., Ltd
Linyi Senluo Plywood Factory
Linyi Forest International Trade CO., Ltd
Email:forest@woodsproductos.com
Website: www.woodsproductos.com
