3. Follow your bliss and the universe will open doors where there
were only walls – joseph campbell.
For several years now, DECORATIVEDOORS has been in crafting
artistic door designs.
With strong focus on product quality we have a large number
of satisfied customers and with that most of our new customers
come with the referals from satisfied customers.
DECORATIVE DOORS makes a team effort requiring creativity,
engineering, innovation and experience .so when you choose
DECORATIVE DOORS you are not only getting a finely hand crafted
piece for your home , but a part of your home as well.
4. Doors are coated with the micro particles of fiber and fiber
resin .
This is the same resin which is used to build small water boats
and FRP sunroof sheets.
Micro coating gives durability in moisture areas, which
safeguards flush doors from de-lamination.
Micro coating gives extra color and glossy finish to printed
doors .
Micro coating also safeguards printed paper and natural
veneer on the doors. After coating its ready to use.
5. Flush doors Printing and Veneer
We will make sure that
every flush door that
comes in our factory is
from the certified
company. Who assures
the good quality and
service .
We only use 100%
hardwood doors
AVAILABLE SIZES
Height :72” to 84”
Width :26”to 38”
Thickness :30,32,35 mm
We use imported
paper for printing
and veneer like
design.
We use high end
printing machines to
get high definition
picture quality.
We use uv coating
for long lasting of
print.
6. Print on the door Micro coating on doors
we fix the printed
media on the door
with fiber resin .
And compress the
door with high
pressure vaccum of
800 pounds.
After fixing the print
media micro coating
resin is as primary
coating,
There after for final
coating as desired we
can give glossy ,matt,
structure effect finish
on the door.
This process takes total
2 hours for each door .
We have production
capacity of 80 doors per
day.