This document discusses various tools used for drilling and preparing holes. It explains that a center punch and center drill are used to mark and create an indentation for starting a drill. Countersinking uses a countersink drill bit to create an angled hole for a countersunk screw head to sit flush with the surface. Counterboring enlarges a hole to allow for a bolt head or nut to sit below the surface. Reaming finishes and sizes holes to the desired diameter for a tight press fit of parts like bolts or rivets.

1. Center Punch Center Drill
Drill
Counter Sink Counter Bore Reamer

2. (CENTER PUNCH)

3. Center Drill)

4. 





5. 


6. (DRILLS)

7. Screws)

8. (COUNTERSINKING)
When a screw is driven into a piece of wood, it sometimes
doesn’t matter that the head of the screw is sticking up out of
the wood. Sometimes it matters a lot and it has to be avoided.
When this is the case, a countersunk screw is used. The
special shape of the head allows it to go ‘flush’ with the
surface of the wood. To work best of all, the hole should be
prepared for the screwhead to fit into it. It is prepared using a
countersink drill bit in the manner shown below. The head of
the countersunk screw will now fit snugly into the prepared
hole
a countersunk hole
This is the countersink drill bit which is placed
in the chuck of the drilling machine and
produces the angled hole which makes the
countersink.
Notice how the
head of the
countersunk
screw is ‘flush’
with the surface
of the wood.

9. (Drill)

10. (Rivet)

16. (Counter Bore)

20.  1/3





21. COUNTER BORE






22. (Reamer)

24. (REAMER)
(Fit and Tolerance)
• (Straight Flutes)
• (Spiral Flutes)
208281 Workshop Practice Created by Prateep Chaisermtawan

25. REAMER
(Hand Reamer)
-
(taper sleeve)
208281 Workshop Practice Created by Prateep Chaisermtawan

26. (Machine
Reamer)
2.1
(Jobber’s Reamer)
2.2
(Chucking Reamer)
2.4
(Expansion Chucking Reamer)
2.3
(Rose Reamer)
2.5
(Shell Reamer)
208281 Workshop Practice Created by Prateep Chaisermtawan

27. 





28. 



29. 

0.05



