1. Power Control Company USA, LLC
A “Green” Solution to
Power Factor Correction
and Harmonic Distortion
2. Statement of Purpose
The Power Control Filter System corrects
power factor error, eliminates all damaging
harmonics, stabilizes voltage fluctuations,
protects against sag and spike damage.
These problems are the largest cause of
power waste, damage to electronics and
electrical equipment and costs facing the
commercial consumer of electricity today.
3. Introducing
This product is
the holder of
several design
and application
patents
The Power Control Filter System
The only power system that addresses ALL aspects
of power usage issues
4. What Problems Do Power Control
Filters Solve
Electronics and Electrical Gear run best with
perfect waves of electricity
– Utility power is often inconsistent
– Equipment can only use 60 cycle current
– Your equipment becomes inefficient and is
damaged by “dirty power”
5. Power Factor
Power Factor
– Most businesses are running on around 70% or
less Power Factor.
This means you are paying for 30% or more unusable
delivered power.
– Yet you pay for all 100% of delivered power.
Is this a power company problem?
NO, because YOU are paying the bills.
6. Harmonic Distortion
Another product of the proliferation of
business equipment and devices is
“Harmonic Distortion”
Harmonic distortion occurs when any
electrical frequency is outside 60 hz. It is
created by multiple devices in an environment
7. Eliminates Harmonic Distortion
Active Harmonic Filter - The PCC Active Harmonic
Filter is an intelligent system which monitors all
harmonics from the 60 Hz prime frequency to
100,000 Hz. It is a fourteen section heavy electronic
device which identifies all frequencies in that range
and opposes that frequency with an equal and
opposite signal to kill the distortion and return it to
zero voltage and zero amperage. The speed of
which this broadband filter reacts is 71 nanoseconds
and can correct between 5 to 160 Amps of harmonic
distortion.
8. How Does it Work?
The Power Control unit is a unique blend of
custom built transformers, capacitors and
software that smooth the incoming power.
Sophisticated algorithms then actively and
intelligently counter balance the harmonic
distortion created by down stream equipment
Each unit is custom “tuned” to the installation
9. Benefits of Power Control Filters
Saving 15% to 30% on Your Power Bills
Devices Run Cooler and Last Longer
– Computers & Electronic devices
– Electric motors – no rewinding
– Lighting – significantly reduces the need to re-bulb
– Transformers – longer life
– Heavy Industrial Equipment
– Sensitive Medical Devices and Equipment – prevents
damage
Avoiding Mission Critical Data Problems
Reducing HVAC usage
10. Do Power Control Filters Work?
ABSOLUTELY
Installed at
– US Army Intelligence Data Center (Utah)
Power Factor went from 68% to 94% Saving Thousands a Month
Loss of Potentially Critical Data was Eliminated
– Nellson Pharmaceutical
Electric Motors that Ran Hot requiring replacement every 2
months began to run cool, no replacements in a year
– Hundreds of successful installations in a variety of industries
including; hospitals, manufacturing and communications.
11. The Market
Hospitals
Labs
Manufacturing Facilities
College & Universities
Office and Residential Buildings
Malls
Warehouses
Printing Plants
12. Manufacturing
The unit is a relatively simple product to
assemble. A company with a good “mod”
shop can build this product.
There 2 basic units. These units are then
custom tuned to the application.
An average installation will be 5 – 15 units.
13. Unit Cost, Selling Price, ROI (USD)
A single unit cost is $6-7,000 dollars
An average installed unit cost is $20 – 40,000
Average Facility Sale $120k – 1.2 million
Average Facility Return on Investment 9-12
Months
There is also a survey fee of $1,500 per site to
determine how much a client will save and how
each unit will be tuned.
14. Sales Cycle
The significant money wasted each month on
power factor error and electrical equipment
replacement due to failure has shortened the
sales cycle to as little as 30-45 days from
survey to Purchase Order.
15. The Business Plan
Power Control Company will maintain an assembly
facility in Utah to service the Utah/Idaho region.
Utah facility will be utilized as the Power Control
Company R&D and Technician Training Center.
Power Control Company will license its patented
technology to partner companies and assign exclusive
territories. These territories will be exclusive for
assembly, distribution and wholesale markets.
Licensees will pay a royalty to Power Control
Company for each unit sold.
16. Benefits to the Partner Company
Exclusive technology to existing customers
Opens doors for new customers
High Margin Product with high demand
Short Sales Cycle
Low start up costs with low inventory
requirements
17. The Request
Power Control requests a six month loan in
the amount of $600,000 (six hundred
thousand) USD.
Loan will be collateralized with company
assets including its technology patents.
Power Control will pay interest plus a provide
an equity component (TBD) in the parent
company.
18. Use of Funds
Establish Utah assembly and training facility.
Hire and train initial Utah facility technicians.
Purchase parts inventory necessary for
assembly of units currently under purchase
order or purchase option.
Conduct inspections and surveys for new
orders.
Deliver and install first round of units.