This document summarizes an IOTA Engineering Converter and Charger. It converts AC voltages between 108-132V to 13.4V DC for battery charging and operating DC loads up to 75 amps. It is ideal for charging all types of 12V lead acid batteries. As a battery charger, it will maintain the battery by delivering its full rated current when the battery capacity is low to minimize stress on the battery cells from heating.

1. Cheaper IOTA Engineering Converter and Charger
IOTA Engineering Converter and Charger
View large image
Product By IOTA Engineering
Technical Details
CONVERTS NOMINAL 108 – 132 AC VOLTAGE TO 13.4 DC VOLTAGE FOR BOTH DC LOAD
OPERATION AND 12V BATTERY CHARGING
IDEAL FOR CHARGING ALL TYPES OF 12 VOLT LEAD ACID BATTERIES INCLUDING FLOODED,
ABSORBED GLASS MAT (AGM) AND GEL CELL
AS A POWER SUPPLY THE UNIT’S TIGHTLY CONTROLLED REGULATION ALLOWS THE USER TO
OPERATE A NOMINAL 12VDC LOAD UP TO 75 AMPS
AS A BATTERY CHARGER THE UNIT WILL MAINTAIN THE BATTERY DELIVERING ITS FULL RATED

2. CURRENT WHEN THE BATTERY CAPACITY FALLS SUFFICIENTLY LOW
VOLTAGE IS SET TO DELIVER ITS MAXIMUM CURRENT FOR THE NECESSARY PERIOD OF TIME
TO MINIMIZE UNDUE STRESS TO THE BATTERY CAUSED BY HEATING OF ITS CELLS
Product Description
Converter/Charger – 75 Amp – Switch mode technology provides the quality battery charging and power
conversion your RV needs. Features clean DC output, two charging modes (13.6V and 14.2V), low operating
temperature, built in protection, and more. Works in conjunction with the IQ Smart Charger for automatic three
stage battery charging, providing safer charging and longer life for RV batteries.
Click!! to See More Features
(Check price now)
Powered by TCPDF (www.tcpdf.org)