Prosoft-Systems is an engineering company founded in 1995 that offers solutions for power systems. It provides services such as project development, automation equipment, and system development. It has 450 employees with headquarters in Ekaterinburg, Russia and offices in Moscow, Minsk, and Tashkent. Prosoft-Systems has testing and calibration laboratories, a training center, and modern production facilities exceeding 3,500 square meters. It works with major customers in electric power and metallurgy and aims to provide complete, high-quality, and certified solutions to its customers.
3. 3
ABOUT
THE COMPANY
Prosoft-Systems is a rapidly developing and innovating engineering
company, which offers project development, automation equipment and
systems development, production and supply services for companies,
operating in electric power energy, metallurgy and other industrial
sectors.
Wide range of services, that can be provided by the company, allows
to fulfill all Customers requirements and to implement truly unique
solutions: starting from project development phase up to production
and supply of single products and systems and ending up with complex
solutions.
Highly-qualified technical personnel, contemporary production,
testing and training facilities provide Prosoft-Systems with capability to
implement projects of any difficulty.
Founded in 1995.
Personnel: 450.
Headquarters:
Ekaterinburg, Russian Federation.
Offices:
Moscow,
Minsk (Republic of Belarus),
Tashkent (Republic of Uzbekistan).
Production facilities:
overall area exceeds 3500 m2.
Certified testing and calibration laboratories.
Training center.
Quality management system:
ISO 9001:2008 compliant.
SOLUTIONS FOR POWER SYSTEMS
4. 4
RELATIONS
WITH CUSTOMERS
Prosoft-Systems appreciates Customer’s trust a lot. Through the years of operation, company
formed set of principles. Following them, company establishes reliable and stable relations with
Customers and Partners. These principles include:
• Prosoft-Systems offers both individual products and COMPLEX SOLUTIONS.
• Prosoft-Systems provides COMPLETE SET of services.
• Prosoft-Systems possesses all the needed resources to provide TURN-KEY solutions.
• Prosoft-Systems has all required CERTIFICATES AND LICENCES for equipment production
and for performing all kinds of works.
• Prosoft-Systems assures QUALITY of the produced equipment at all development
and production stages.
• Prosoft-Systems follows all requirements when providing services and
TAKES RESPONSIBILITY for the quality of provided services.
Equipment and solutions, provided by Prosoft-Systems, successfully operate
in Russia and aboard, including CIS countries.
List of implementations is
constantly updated.
Actual one is available at
Prosoft-Systems official
web-site:
www.prosoftsystems.com
Among Prosoft-System Customers are the following companies:
• FGC UES (Russian Grids),
• RusHydro,
• Wholesale market electricity and heat production companies (OGK),
• Regional generating companies (TGK).
SOLUTIONS FOR POWER SYSTEMS
5. PARTICIPATION
IN INTERNATIONAL
ORGANIZATIONS
Prosoft-Systems is a member of the main international organizations which support open technologies
and standards. This allows to develop prospective products, establish and maintain mutually beneficial
coopeation with foreign expert organizations, participate in standards development process.
SOLUTIONS FOR POWER SYSTEMS 5
• CIGRE,
• OPC Foundation,
• UCA International Users Group,
• EtherCAT Technology Group.
6. 6
BASIC EMI TESTS CONDUCTED
№ Description Reference standard
1 Electrostatic discharge (ESD) IEC 61000-4-2-2008
2 Burst (Fast Transient) IEC 61000-4-4-2004
3 Surge IEC 61000-4-5-95
4 Induced (Conducted) RFI IEC 61000-4-6-96
5 Voltage Dips and Interrupts (AC Power Supply) IEC 61000-4-11-94
6 Damped Oscillatory IEC 61000-4-12-97
7 Harmonics and interharmonics including mains signalling at AC power port, low frequency IEC 61000-4-13-2002
8 Voltage fluctuation IEC 61000-4-14-99
9 Mains Frequency Voltage IEC 61000-4-16-98
10 Ripple on DC Power Supply IEC 61000-4-17-99
11 Variation of power frequency IEC 61000-4-28-99
12 Voltage Dips and Interrupts (DC Power Supply) IEC 61000-4-29-2000
13 Magnetic Field IEC 61000-4-8-93
14 Pulse magnetic field IEC 61000-4-9-93
15 Damped Oscillatory Magnetic Field IEC 61000-4-10-93
16 Surge currents GOST R 50746-2000
17 Short time AC interferences in protection grounding circuits GOST R 50746-2000
18 Dielectric Strength IEC 60255-5-77
SOLUTIONS FOR POWER SYSTEMS
7. 7
TESTING AND
CALIBRATION
LABORATORIES
TESTING LABORATORY
This lab is accredited by Federal Agency on
Technical Regulating and Metrology. It conducts
certification, periodic, type, qualification and
research testing of the produced equipment,
including:
• EMI tests,
• Environmental tests,
• Safety tests.
All testing procedures comply with national
and international standards.
This laboratory includes the most up-to-date
equipment of both Russian and foreign
manufacturers.
The laboratory includes:
• EMI testing facility (where 18 types of tests
are performed);
• Environmental testing facility (tests are
carried out in wide temperature range:
-70…+180ºC; at humidity level of 98% for
positive temperatures; in 14 m2 volume).
CALIBRATION LABORATORY
This lab is accredited by Federal Service
of Accreditation. Calibration laboratory has all
the necessary reference equipment to perform
calibration testing. All tests performed comply
with normative documents that define methods
and requirements for calibration testing. This
assures high quality of testing procedures.
Every single reference equipment is calibrated
according to the schedule.
Calibration lab performs initial (prior to
commissioning and after recovery) as well
as periodic testing of measurement devices
produced.
Lab operates according to requirements of:
• Federal law 102-FL (dated 26.06.2008),
“Regarding measurements unity provision”.
• Federal law 184-FL (dated 27.12.2002),
“Regarding technical regulation”.
• GOST ISO/IEC 17025-2009, “General
requirements for the competence of testing and
calibration laboratories”.
Staff, operating testing
lab, successfully
participated in training
courses in State Marine
Technical University of
St. Petersburg (SMTU).
Staff, operating
calibration lab,
successfully participated
in training courses in
accordance with Order
50.2.012-94,
“Governmental
measurements
unity provision
system. Procedures
for certification of
measurement devices
calibration laboratories”.
Prosoft-Systems owns contemporary testing and calibration laboratories and this allows to perform
testing of produced equipment in compliance with up-to-date standards. This also allows to reduce
products net cost and production time.
SOLUTIONS FOR POWER SYSTEMS
9. LICENSES AND
CERTIFICATES
Production activities are licensed, produced products have compliance certificates
of different certification laboratories, measurement devices are included in State register
of approved measurement instruments of Russian Federation and CIS countries.
• Self-Regulating Organization and Non-Commercial Partnership
“EnergoStroiAllianz Group of Construction Organizations” license, granting rights
to perform works at hazardous facilities.
• Self-Regulating Organization and Non-Commercial Partnership “Energoproekt”
license granting rights to perform project development for hazardous facilities.
• ATS JSC certification, granting rights for preproject examination, project
development, equipment production, assembly and commissioning activities at
electric energy revenue metering facilities.
• License, granting rights for assembly and commissioning of control and governing
systems of trunk pipelines.
SOLUTIONS FOR POWER SYSTEMS 9
• Measurement instruments approval certificates.
• Measurement instruments production license.
• CIS countries measurement instruments approval and compliance certificates
(Ukraine, Belarus, Kazakhstan, Uzbekistan).
• FGC UES conclusion on applicability at electric power facilities.
• Company holds trademarks on several products.
Complete list of
certificates and licenses
is available at company’s
website:
www.prosoftsystems.com
10. PRODUCTION
FACILITIES
10 SOLUTIONS FOR POWER SYSTEMS
Production facilities:
more than 3500 m2
Prosoft-Systems
production facilities
offer complete range of
services and wide range
of capabilities.
Prosoft-Systems has impressive and rapidly improving production facilities. The most
comprehensive equipment is located on more than 3500 m2. Set of production equipment is improving
every year, with new technologies and innovations being introduced.
Prosoft-Systems production facilities offer wide range of capabilities, making it possible to end
up with the ready to use products. Our staff is able to fulfill the requirements of any production order
(starting from simple devices to comprehensive electrotechnical equipment) - either single unit or
series production.
Production facilities include:
• design department;
• mechanic department;
• printed circuit boards assembly department;
• testing and tuning department;
• technical supervision group.
Increasing technical capabilities and qualification of the team guarantee high flexibility of the
process and allow to diversify product range. Currently Prosoft-Systems produces more than 50
devices of different modifications.
Prosoft-Systems has all the needed licenses and certificates on products produced and operations
implemented. Every stage of the process is accompanied by strict quality assurance and test
procedures. Stability and high-level indicators are the basis of our production process and proof of its
significant culture.
Our advantages:
• ability to implement production orders of any difficulty;
• high quality of produced equipment;
• affordable prices;
• short production time.
Nowadays Prosoft-Systems continues to tame new technologies with the aim to optimize
production procedures. This makes us a reliable partner for our Customers and guarantees stable and
effective work.