eee499

1. Supervisor : Dr. Jamal Kharrosheh
PREPARED BY :
Rimaa shehade
Nema Abu Al Kheer
Samah Amodi

2. Out line:
 Introduction.
 Objective.
 Benifets .
 Achievements in last semester
 Achievements in this semester.
 Problems
 Solutions
 Future work
 Conclusion
 Recommendation

3. Introduction:
 In recent years, there have been a number of
accidents where babies are forgotten in a car.
 During a hot summer day and in direct
sunlight, a car’s interior temperature can
reach as high as 65° C. Within minutes, a car
can become a hot furnace exposing the child
to life threatening conditions.

4. :Our Objective
The goal of this project is to design a reliable device that
can accurately detect a child in a hot car.

5. Benefits
 Life saving: by using modern technology and some
kinds of alarms.
 Reliable:
*Device utilizes three human sensors, greatly
increasing the detection rate
*Send two sms for toe different persons .

6. Achievement in last semester
 In last semester we studied the project deeply and
analyses it theoretically .
 we bought The suitable equipment for project.
 we connected The sensors to each other practically to
test it .

7. Achievement in this semester
 We continue the program was started in the
last semester.
 We connected all the sensors together and
tested them.
 we work on the alarms which contains send 2
sms’s by GSM modem , lighting and sound
alarm and open the window .

10. Problems
 We face some difficult in writing the code .
 CO2 sensor : the price is very expensive and
not available here .
 We have some difficulty in final design of the
car to make it suitable for sensors.

11. Solutions
 We learn the arduino language to be able to write a
suitable code .
 We replace CO2 sensor by smoking sensor which
approximately give the same result.
 We make more types of design until reach final design

12. Final Design

13. :Future work
 Add oxygen sensor to see the time remaining for the
life of the child and rescue him.
 Add push button to prevent the alarm in case it is not
needed
 connect the device directly with the Civil Defense to
increase the possibility to rescue the Children.
 So ,It can convert this project with the development to
product can be sold in markets

14. Conclusion :
Although the problems we faced ,we able to
solve it to achieve our goals and have this final
design

15. Recommendation
 For the Health of your sons recommend that all
parents put this device in their cars.
 Turn the system into a commercial product .