Hazardous Area Flood Lights - ATEX Certified Zone 2 Floodlights 150W SON, 250W SON, 400W SON, 500W Tungsten Halide Petrel hazardous area (ATEX certified) Zone 2 floodlights are extensively specified for Ex e lighting applications. Petrel Hazardous Area Zone 2 Flood Lighting (ATEX) - Ex Zone 2 Flood Light Petrel hazardous area Zone 2 floodlights are made from die cast aluminium and incorporate assymetrical reflector as standard - Zone 2 floodlights can be fitted with a range of control gear suitable for lamps from 150w to 500w. Petrel ZT hazardous area Zone 2 floodlight is ATEX certified for use with SON, MBF and tungsten lamps. Zone 2 Floodlights, Hazardous Area Lighting (ATEX) - Petrel ZT Flood Light Benefits Symmetrical reflector allows maximum directional light output Graduated mounting bracket allows for consistent installation angle for multiple units Easy re-lamping via hinged front section Options Sodium, metal halide, and tungsten lamp options Other colours available Petrel ZT150 (150W SON), ZT250 (250W SON), ZT400 (400W SON) Petrel ZT500 (500W tungsten halide) Features 230v 50Hz standard -20°C to +30°C standard supply subject to ambient temperature requirements. Tubular : SON, MBI, Tungsten. 70w to 500w Symmetrical reflector fitted to all versions (lamps not provided). Hazardous Area Zones Classification Zone 2 - where flammable atmosphere is not likely to occur during normal operation and if it does will only exist for short period of time, typically less than 10 hours per year. Thorne & Derrick UK are official stockists and distributors for the Petrel Explosion Proof and Hazardous Area Lighting ranges for Zone 1 and Zone 2 lighting installations with ATEX certification – this includes hazardous area fluorescent, bulkhead, floodlight and wellglass lighting. EX Lighting Products from Petrel Hazardous Area Electrical Equipment : Ex de Well Glass, Ex d Emergency Flourescent Luminaire, Ex de Bulkhead, Ex de Zone 1 Floodlight, Zone 2 Floodlight, Ex ed Standard & Emergency Flourescent Luminaire, Zone 2 Standard & Emergency Flourescent Luminaire, Ex d Flourescent Luminaire, Zone 2 Bulkhead Luminaire, Ex ed Recessed Zone 1 Flourescent Luminaire.

1. ATEX
CERTIFIED
ZT Ex nA Floodlight Range
CAT III
ZONE 2
The ZT Series is a ‘nA’ certified floodlight fitting available with a variety of lamp options. It offers the following benefits:

Hinged lid opening for safe re-lamping

Graduated angle bracket for fast, accurate
installations

Light weight but strong die cast aluminium
construction for long lifetime

Asymmetric reflector for maximum downward
light output
Typical applications
Chemical sites
Refineries
Docks / jetties
Offshore
Marine
Munitions yards
Paint spray shops
Grain storage
Paper mills
Lamp types and ‘T’ ratings
Specification & options
Specification
Certification Code (Gas and
Dust )
Protection type
ATEX / type class
Certification standards
Fuel storage facilities
Water treatment plants
Metal treatment plants
Details
Ex nA T4
Ex nA (non sparking)
Group II Category 3GD
EN 60079
Certificate(s)
05ATEXTFZT/01
Suitable zoned areas
Zone 2, Zone 22
Gas group suitability
II
Ambient range (max)
Lamp Type / Lamp
holder
ZT Series Floodlight
All certified Ex nA
500W (Max)
Tungsten Halogen /
E40
T4@Ta=30⁰C
400W SON (Max) /
E40
T4@Ta=30⁰C
400W MBI (Max) /
E40
T4@Ta=30⁰C
400W HPMV (Max) /
E40
T4@Ta=30⁰C
-20⁰C to 30⁰C
Material
Ingress protection (IP rating)
Corrosion resistant die cast aluminium body and
bezel, toughened glass lens
IP66
Cable Entries
1 x M20 clearance hole in side of body
Electrical connections
2 wire and earth. Cable size 4mm2 max
Control gear
Integral within the fitting (where used)
Supply voltage
Installation / Mounting
Re-lamp access
Weight
220-250V, 50/60Hz
‘U’ shaped stirrup bracket with angle adjustment
mechanism
2 screws with hinged lid
19.5kg—21 kg lamp dependent
Cable entry
Terminal access
Graduated angle
bracket (Standard)
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.cablejoints.co.uk
www.thorneanderrick.co.uk
www.petrel-ex.co.uk

2. Sizes & Lamp options
How to select your product for ordering
Example: A ZT 150W SON fitting for use at 240 volts 50Hz.
Model / Lamp type / Voltage / Mains frequency / Options / Options
ZT
150W SON
240
50
Product code required is:
ZT/150WSON/240/50
Photometric data available-contact for details
Fixings & Dimensions - all versions
All dimensions
in mm
Also available from Petrel
Zone 1 Fluorescent
Zone 1 Wellglass
Zone 1 Floodlight
Industrial Bulkhead
Representation worldwide
Hazardous area control equipment
www.petrel-ex.co.uk
A Chamberlin plc company
Tel: +44 (0)191 490 1547
Petrel Limited
Fax: +44 (0)191 477 5371 B33 0LB United Kingdom
22 Fortnum Close, Kitts Green, Birmingham,
Email: northernsales@thorneandderrick.co.uk
T +44 (0)121 783 7161 • F +44 (0)121 783 5717
• E sales@petrel-ex.co.uk • W www.petrel-ex.co.uk
Website: www.cablejoints.co.uk1539429 England
Registered No.
www.thorneanderrick.co.uk
Registered Office: Chuckery Road, Walsall WS1 2DU • VAT No. GB 695 8648 58