Zone 2 Floodlights ATEX Certified Hazardous Area Floodlights Petrel hazardous area (ATEX certified) Zone 2 floodlights are extensively specified for Ex e lighting applications. Petrel ZT150 - 150W - SON Floodlight for Zone 2 Hazardous Areas - ATEX Group II Cat 3GD Petrel ZT Zone 2 Floodlights provide following benefits : * Hinged lid opening for safe re-lamping in hazardous areas * Graduated angle bracket for fast, accurate installations * Lightweight but strong die cast aluminium floodlight * Asymmetric reflector for maximum downward light output Petrel Hazardous Area Zone 2 Flood Lighting (ATEX) - Ex Zone 2 Flood Light Petrel hazardous area Zone 2 floodlights are made from die cast aluminium and incorporate assymetrical reflector as standard - Zone 2 floodlights can be fitted with a range of control gear suitable for lamps from 150w to 500w. Petrel ZT hazardous area Zone 2 floodlight is ATEX certified for use with SON, MBF and tungsten lamps. Hazardous Area Zones Classification Zone 2 - where flammable atmosphere is not likely to occur during normal operation and if it does will only exist for short period of time, typically less than 10 hours per year. ATEX Certified Lighting for Hazardous Areas Zones 1 & Zones 2 ATEX is the name given to a set of European Directives relating to Hazardous Area Electrical & Lighting Equipment Installations (Flammable Atmospheres) to avoid industrial accident or incident, this cover hazardous area lighting Zone 1 and Zone 2 installations. ATEX Directive 94/9/EC (ATEX 95), is a directive adopted by the EU under the “New Approach” strategy. The “New Approach” ATEX directive supersedes the “Old Approach” ATEX Directive, the Potentially Explosive Atmospheres Directive, 76/117/EEC – ATEX 94/9/EC (ATEX 95) facilitates free trade in the EC for hazardous area lighting and electrical equipment intended to be used in potentially explosive atmospheres. ATEX Directive 94/9/EC (ATEX 95) covers “Electrical Equipment” used in hazardous areas with potentially explosive atmospheres created by presence of gases, vapours, mists or dusts. Thorne & Derrick UK are specialist distributors of Petrel Hazardous Area Lighting ranges providing expert technical guidance, site surveys, competitive quotations, ex stock delivery and a comprehensive lighting design service - this includes hazardous area Zone 1 and Zone 2 (ATEX) fluorescent, recessed, portable, bulkhead, wellglass and floodlights. Petrel Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.

1. ATEX
CERTIFIED
ZT Ex nA Floodlight Range
CAT III
ZONE 2
The ZT Series is a ‘nA’ certified floodlight fitting available with a variety of lamp options. It offers the following benefits:

Hinged lid opening for safe re-lamping

Graduated angle bracket for fast, accurate
installations

Light weight but strong die cast aluminium
construction for long lifetime

Asymmetric reflector for maximum downward
light output
Typical applications
Chemical sites
Refineries
Docks / jetties
Offshore
Marine
Munitions yards
Paint spray shops
Grain storage
Paper mills
Lamp types and ‘T’ ratings
Specification & options
Specification
Certification Code (Gas and
Dust )
Protection type
ATEX / type class
Certification standards
Fuel storage facilities
Water treatment plants
Metal treatment plants
Details
Ex nA T4
Ex nA (non sparking)
Group II Category 3GD
EN 60079
Certificate(s)
05ATEXTFZT/01
Suitable zoned areas
Zone 2, Zone 22
Gas group suitability
II
Ambient range (max)
Lamp Type / Lamp
holder
ZT Series Floodlight
All certified Ex nA
500W (Max)
Tungsten Halogen /
E40
T4@Ta=30⁰C
400W SON (Max) /
E40
T4@Ta=30⁰C
400W MBI (Max) /
E40
T4@Ta=30⁰C
400W HPMV (Max) /
E40
T4@Ta=30⁰C
-20⁰C to 30⁰C
Material
Ingress protection (IP rating)
Corrosion resistant die cast aluminium body and
bezel, toughened glass lens
IP66
Cable Entries
1 x M20 clearance hole in side of body
Electrical connections
2 wire and earth. Cable size 4mm2 max
Control gear
Integral within the fitting (where used)
Supply voltage
Installation / Mounting
Re-lamp access
Weight
220-250V, 50/60Hz
‘U’ shaped stirrup bracket with angle adjustment
mechanism
2 screws with hinged lid
19.5kg—21 kg lamp dependent
Cable entry
Terminal access
Graduated angle
bracket (Standard)
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.cablejoints.co.uk
www.thorneanderrick.co.uk
www.petrel-ex.co.uk

2. Sizes & Lamp options
How to select your product for ordering
Example: A ZT 150W SON fitting for use at 240 volts 50Hz.
Model / Lamp type / Voltage / Mains frequency / Options / Options
ZT
150W SON
240
50
Product code required is:
ZT/150WSON/240/50
Photometric data available-contact for details
Fixings & Dimensions - all versions
All dimensions
in mm
Also available from Petrel
Zone 1 Fluorescent
Zone 1 Wellglass
Zone 1 Floodlight
Industrial Bulkhead
Representation worldwide
Hazardous area control equipment
www.petrel-ex.co.uk
A Chamberlin plc company
Tel: +44 (0)191 490 1547
Petrel Limited
Fax: +44 (0)191 477 5371 B33 0LB United Kingdom
22 Fortnum Close, Kitts Green, Birmingham,
Email: northernsales@thorneandderrick.co.uk
T +44 (0)121 783 7161 • F +44 (0)121 783 5717
• E sales@petrel-ex.co.uk • W www.petrel-ex.co.uk
Website: www.cablejoints.co.uk1539429 England
Registered No.
www.thorneanderrick.co.uk
Registered Office: Chuckery Road, Walsall WS1 2DU • VAT No. GB 695 8648 58