The document describes the param® XLW auto tensile tester, which provides accurate testing for various material properties with 7 independent test modes and customizable grips for over 1000 materials. It features advanced safety and operating software that supports statistical analysis and historical data comparison. The instrument conforms to multiple national and international standards and requires an external gas supply for operation.

1. PARAM® XLW (M) Auto Tensile Tester
Yarina Gao trade5@labthink.cn
Professional Technology
 1% of reading value effectively ensures the accuracy of test results
 7 independent test modes are available, including tensile strength,
peeling force, tearing force, heat seal strength and other force
properties of flexible packages
 Different ranges of load cells and 7 distinct test speeds to meet
different test requirements
 The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD
display
 Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure
memory for safe test operation
 Professional operating software support statistical analysis of group specimens, superposition analysis of test
curves and historical data comparison functions as well as multi-functions of parameter set, printing, inquiry,
clear and calibration, etc
 Support Lystem™ Lab Data Sharing System for uniform and systematic data management
Applications
This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is
also available for special material tests. Examples of instrument applications:
Basic
Extended Applications
Applications
Puncture Test of Puncture/Pullout
Puncture Test of Puncture Test of
Shearing Test Hypodermic Needles Test of Flexible
Films Infusion Bags
in Artificial Skin Rubber Closures
Test of Tensile Opening Resistance Puncture/Pullout
Tear Test of ZD Opening Force Test of
Strength and Test of Combined Test of Oral Liquid
-Type Caps Oral Liquid Caps
Elongation Rate Covers Caps
90 Degree Pullout Puncture/Pullout
Test of Tensile Pullout Test of 23 Degree Pullout
Test of Infusion Bag Test of Bottle Caps
Strength at Break Infusion Bag Caps Test of Bottle Caps
Caps or Rubber Closures
Tear Resistance Test
Tear Resistance 90 Degree Peel Test 90 Degree Peel Test of Tear Resistance Test
of Adhesive
Test of Adhesive Tapes Water-soluble Plasters of Adhesives
Binding Books
Heatseal Strength Adhesive Strength Adhesive Strength Peel Test of Flexible Removal Force of
Test Test (soft) Test (hard) Tube Caps Pipes and Pipe Joints
Opening Force Test
90 Degree Peel Pullout Test of Pullout Test of Tensile Strength of
of Jelly Cups and
Test Cosmetic Brush Hair Tooth Brush Hair Ropes at Break
Yogurt Cups
180 Degree Peel Peel Test of Cup Pullout Test of 45 Degree Peel Test of Tensile Strength of
Test Films Rubber Stoppers Bottle Membranes Sealing Bags
Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140
w w w.labthinkinter n atio n al.co m.cn

2. Peel Test of Magnetic 90 Degree Peel Test Tear Resistance of Separating Force of
Cores of Magnetic Cards Heat Sealing Films Protect Films
Compressive
Peel Test of Release Tear Test Using Unwrapping Force of
Resistance of Plastic
Paper Trouser Method Adhesive Tapes
Bottles
135 Degree Peel Peeling Grips of
20 Degree Peel Test Eccentric Grips
Test of Plugs Floating Rollers
Tensile Strength of
Japanese Sample
Wide Sample Grips British Sample Grips Contact Lenses at
Grips
Break
Compression
Resistance of Jelly
Cups
Test Principle
The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test.
The signals of force and displacement changes are separately recorded by the load cell fixed on the driven grip
and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by
further calculation.
This instrument conforms to various national and international standards as follows:
ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, QB/T 2358,
QB/T 1130, GB 8808, GB/T1040.1-2006, GB/T1040.2-2006, GB/T 1040.3-2006, GB/T1040.4-2006,
GB/T1040.5-2008, GB/T4850-2002, GB/T12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T
2790, GB/T 2791, GB/T 2792, GB/T 17590
Technical Specifications
Items Specifications
TestRange 100N, 200N, 500N(one of them is available)
Accuracy 1% of reading value
Test Speed 50, 100, 150, 200, 250, 300, 500 mm/min
Number of Specimens 1
30 mm (Standard Grip)
Specimen Width
50 mm (Optional Grip)
Specimen Clamp Pneumatic Specimen Clamp
Stroke 600 mm
Pressure of Gas
0.5 MPa~ 0.7 MPa (Not in supply scope)
Supply
Port Size Φ4 mm PU Tubing
Instrument Size 450 mm(L) x 580 mm(W) x 1100 mm(H)
Power Supply AC 220V 50 Hz
Net Weight 60 kg
Configurations
Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140
w w w.labthinkinter n atio n al.co m.cn

3. Standard Mainbody, Pneumatic Clamping System, Professional Software, and Communication Cable
Configurations
Micro Printer, Printing Cable, Standard Pressure Roller, Test Plate, Sample Cutter, and
Optional Parts
Customized Grips
1.The gas supply port of this instrument is Φ4 mm PU Tubing
Note
2.Customers will need to prepare for gas supply.
Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140
w w w.labthinkinter n atio n al.co m.cn