This document describes the Labthink XLW (G6) Auto Tensile Tester. It can test over 100 materials with accuracy of 0.5% of full scale. It has 6 working stations, 1200mm stroke, load cells up to 500N, and speeds from 100-500mm/min. The instrument conforms to various standards and is controlled via computer software for statistical analysis and reporting of test results.
XLW (B) Auto Tensile Tester can be used to measure physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective films, leather, rubber and paper fiber, etc. It can perform test items of tensile, peeling, deformation, tearing, heat seal, adhesive, and open force, etc.
XLW (PC) Auto Tensile Tester can be used to determine physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, and adhesive bandage (plaster) etc.
XLW Auto Tensile Tester is applicable to the determination of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, adhesive bandage (plaster), release paper, protective films, flip off cap, foil, diaphragm, back sheet, non-woven, rubber, and paper fiber, etc.
XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminum foil, diaphragm, back sheets, non-woven fabrics, rubber, paper, etc.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
XLW (B) Auto Tensile Tester can be used to measure physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective films, leather, rubber and paper fiber, etc. It can perform test items of tensile, peeling, deformation, tearing, heat seal, adhesive, and open force, etc.
XLW (PC) Auto Tensile Tester can be used to determine physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, and adhesive bandage (plaster) etc.
XLW Auto Tensile Tester is applicable to the determination of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, adhesive bandage (plaster), release paper, protective films, flip off cap, foil, diaphragm, back sheet, non-woven, rubber, and paper fiber, etc.
XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminum foil, diaphragm, back sheets, non-woven fabrics, rubber, paper, etc.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
FDI-01 can be used for the determination of impact resistance of packaging materials such as plastic films, laminates by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation. The flex durability would be obtained by measuring the changes in number of pinholes or barrier properties after test, which could provide quantitative basis for package design and practical usage.
Standard test plates and weights ensure the accuracy of test data
Six testing stations could test groups of specimens simultaneously
Auto timing and locking functions provide higher accuracy of test results
The instrument is controlled by micro-computer, with PVC operation panel, membrane switches and LCD, which is convenient for customers to operate and view test data
HTT-L1 is designed for hot tack property test for plastic films, laminated films and other packaging films. Meanwhile, it is also used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
LSSD-01 is designed for leak detection and seal strength test, including creep test and burst test in one instrument. It can be used for measurement of heat seal edge of flexible packages that are made by heat seal and adhesive processing.
YGJ-02 is applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
El Grupo de Investigación 'Análisis Económico y Economía Política' organiza el XI Encuentro Economía de la Cultura, que en esta ocasión tratará el tema 'Museos y Centros de Arte Contemporáneos: nuevos modelos de gestión en un contexto de crisis'.
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
FDI-01 can be used for the determination of impact resistance of packaging materials such as plastic films, laminates by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
FDT-02 is professionally applicable to the determination of flex durability of flexible films, composite films, and coating films. The instrument can simulate the kneading and creasing behaviors of films happened during production, processing and transportation. The flex durability would be obtained by measuring the changes in number of pinholes or barrier properties after test, which could provide quantitative basis for package design and practical usage.
Standard test plates and weights ensure the accuracy of test data
Six testing stations could test groups of specimens simultaneously
Auto timing and locking functions provide higher accuracy of test results
The instrument is controlled by micro-computer, with PVC operation panel, membrane switches and LCD, which is convenient for customers to operate and view test data
HTT-L1 is designed for hot tack property test for plastic films, laminated films and other packaging films. Meanwhile, it is also used for peel, shear, tension and other test items for adhesives, adhesive tapes, laminated films, plastic films, paper and other flexible materials.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
LSSD-01 is designed for leak detection and seal strength test, including creep test and burst test in one instrument. It can be used for measurement of heat seal edge of flexible packages that are made by heat seal and adhesive processing.
YGJ-02 is applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coating, surface coating and lamination.
El Grupo de Investigación 'Análisis Económico y Economía Política' organiza el XI Encuentro Economía de la Cultura, que en esta ocasión tratará el tema 'Museos y Centros de Arte Contemporáneos: nuevos modelos de gestión en un contexto de crisis'.
Xerox Toner Dolumu Adana 12 Mart 2016
Adana toner dolum merkezleri ve adana kartuş dolum merkezi firması olarak adana çukurova seyhan yüreğir ilçelerine toner dolumu ve kartuş dolu hizmeti veriyoruz. firma olarak adana’da firmalar işletmeler ve özel kişiler için toner ve kartuş dolumu’nun ne kadar gerekli bir hizmet olduğunun bilincindeyiz. adana toner ve kartuş dolum merkezi olarak toner dolumu ve kartuş dolumu hizmetini gerçekleştirirken orjinal toner tozu ve orjinal kartuş mürekkebi kullanmaktayız. adana toner dolum merkezi ve kartuş dolum merkezi firması olarak adana’da toner dolumu ve kartuş dolumu’nun dışında birde toner tozu satışı yapmaktayız.
Adana’da gerçekleştirdiğimiz başlıca toner ve kartuş dolumu hizmetleri şu şekildedir.
HP TONER DOLUMU ADANA – HP KARTUŞ DOLUMU ADANA
XEROX TONER DOLUMU ADANA – XEROX KARTUŞ DOLUMU
ADANA SAMSUNG TONER DOLUMU ADANA – SAMSUNG KARTUŞ DOLUMU ADANA
LEXMARK TONER DOLUMU ADANA – LEXMARK KARTUŞ DOLUMU ADANA
BROTHER TONER DOLUMU ADANA – BROTHER KARTUŞ DOLUMU ADANA
KYOCERA TONER DOLUMU ADANA – KYOCERA KARTUŞ DOLUMU ADANA
CANON TONER DOLUMU ADANA – CANON KARTUŞ DOLUMU ADANA
EPSON TONER DOLUMU ADANA – EPSON KARTUŞ DOLUMU ADANA
KONICA MINOLTA TONER DOLUMU ADANA – KONICA MINOLTA KARTUŞ DOLUMU ADANA
Adana’da toner dolumu veya kartuş dolumu işleriniz için firmamızı arayabilirsiniz. aşağıda toner tozu markaları listelenmiştir.
Hp toner tozu satışı adana
Xerox toner tozu satışı adana
Samsung toner tozu satışı adana
Lexmark toner tozu satışı adana
Brother toner tozu satışı adana
Kyocera toner tozu satışı adana
Canon toner tozu satışı adana
Epson toner tozu satışı adana
Konica minolta toner tozu satışı adana
Adana’nın her yerinden haftaiçi ve haftasonu cumartesi saat 19:00 a kadar toner dolumu , kartuş dolumu işleriniz için bizi arayabilirsiniz. toner ve kartuş dolumu çok dikkat gerektiren bir meslek dalı olduğundan lütfen toner ve kartuş dolumlarınızı uzmanlaşmış firmalara yaptırınız.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, films and paper.
BLD-200N Bonding Force Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protection films, release paper, laminated films, leatheroid, woven bags and paper.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesive tapes, adhesive bandages(plasters), adhesive labels, and protective films, etc.
VAC-V1 is applicable to the determination of gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, sheeting, foils and finished packages, etc.
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
VAC-V3 is designed for the measurement of gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, high barrier material, sheets, foils, etc.
FDI-01 can be used for the determination of impact resistance of packaging materials such as plastic films, laminates by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
MFY-01 is designed according to ASTM D3078 (bubble emission method) and applicable to the leakage determination of packages for food, medical instruments, daily chemical products, cars, electronic components, stationeries and other industrial products.
VAC-V2 can be used to measure gas permeability rate, solubility coefficient, diffusion coefficient and permeability coefficient at various temperature of plastic films, laminated films, high barrier material, sheets, foils, etc.
W3/030 is based on the cup method and designed for water vapor transmission rate measurement of plastic films, laminated films, sheets as well as various materials used in medical and construction industries
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420.
NO1 Uk Amil Baba In Lahore Kala Jadu In Lahore Best Amil In Lahore Amil In La...Amil baba
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
MATHEMATICS BRIDGE COURSE (TEN DAYS PLANNER) (FOR CLASS XI STUDENTS GOING TO ...PinkySharma900491
Class khatm kaam kaam karne kk kabhi uske kk innings evening karni nnod ennu Tak add djdhejs a Nissan s isme sniff kaam GCC bagg GB g ghan HD smart karmathtaa Niven ken many bhej kaam karne Nissan kaam kaam Karo kaam lal mam cell pal xoxo
1. Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85812140
www.labthinkinter n atio n al.com.cn
Professional Technology
Better than 0.5% of full scale effectively ensures accurate test results
Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc.
Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed
1200 mm extra-long stroke satisfies the test needs of various
materials with extreme deformation rate
6 working stations and pneumatic specimen clamping facilitate to test multiple specimens simultaneously
Different test range of load cells and 6 distinct speeds to meet different requirements
The instrument is controlled by computer, with PVC operation panel and membrane switch which convenient for instrument operation
Intelligent designs of over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation
Professional operating software supports statistical analysis of group specimens, superposition test curves, maximum, minimum, average and standard deviation of test results
Supports zoom-in and zoom-out of test curve and vernier indication results
Supports Lystem™ Lab Data Sharing System for uniform and systematic management of test results reports
Applications
This instrument is equipped with more than 100 grips for tests of 1000 materials. And customization also available for special material tests. Examples of instrument applications:
Basic Applications
Extended Applications(Additional Accessories Required)
Tensile Test
Opening Resistance Test of Combined Covers
Tear Test of ZD -Type Caps
Opening Resistance Test of Oral Liquid Caps
90 Degree Pullout Test of Infusion Bag Caps
Test of Tensile Strength and Elongation Rate
Tear Test of Adhesive Binding Books
Tear Test of Adhesives
23 Degree Pullout Test of Bottle Caps
Pullout Test of Infusion Bags
Test of Tensile Strength at Break
90 Degree Peel Test of Adhesives
Adhesive Strength Test (hard)
90 Degree Peel Test of Water-soluble Plasters
Opening Resistance Test of Jelly Cups and Yogurt Cups
Tear Resistance Test
Adhesive Strength Test (soft)
Pullout Test of Tooth Brush Hair
Peel Test of Flexible Tube Caps
Removal Force of Pipes and Pipe Joints
Heatseal Strength Test
Pullout Test of Cosmetic Brush Hair
Pullout Test of Rubber Closures
Tensile Strength of Ropes at Break
Separating Force of Protection Films
XLW (G6) Auto Tensile Tester
PARAM®
2. Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85812140
www.labthinkinter n atio n al.com.cn
90 Degree Peel Test
Peel Test of Cup Films
Tear Test of Heatseal Films
45 Degree Peel Test of Bottle Membranes
Tensile Strength of Sealing Bags
180 Degree Peel Test
Peel Test of Release Paper
135 Degree Peel Test of Plugs
Unwrapping Force of Adhesive Tapes
Tear Test Using Trouser Method
20 Degree Peel Test
Peeling Grips of Floating Rollers
Eccentric Grips
Wide Sample Grips
Japanese Sample Grips
British Sample Grips
Test Principle
The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven grip and embedded displacement transducer. The tensile strength, tear strength and elongation rate can be obtained by further calculation.
This instrument conforms to multiple standards as following:
ISO 37, ASTM E4, D882, D1938, D3330, ASTM F88, F904, JIS P8113, QB/T 2358, QB/T 1130, GB 8808, GB/1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, 16578.1-2008, GB/T 7122, 2790, GB/T 2791, GB/T 2792, GB/T 17590
Technical Specifications
Specifications
XLW (G6)
Load Cell Capacity
500 N, 50 N (one of them is available)
Accuracy
0.5% of Full Scale
Test Speed
100 150 200 250 300 500 mm/min
Number of Specimens
1~ 6
Specimen Width
30 mm (Standard Grip)
Clamping Way
Pneumatic Specimen Clamp
Stroke
1200 mm
Gas Supply Pressure
0.5 MPa~ 0.7 MPa (outside of supply scope)
Port Size
Φ6 mm PU Tubing
Instrument Dimension
1020 mm (L) x 510 mm (W) x 2100 mm (H)
Power Supply
AC 220V 50 Hz
Net Weight
210 kg
Configurations
Standard Configurations
Mainframe, Universal Grips, Professional Software, Communication Cable and Calibration Cable
Optional Parts
Standard Pressure Roller, Test Plate, Sample Cutter and Customized Grips
Note
1. The gas supply port of the instrument is Φ6 mm PU Tubing;
2. Customers will need to prepare for gas supply.
3. Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86-531-85068566 FAX: +86-531-85812140
www.labthinkinter n atio n al.com.cn
Please Note: Labthink is always dedicated to the innovation and improvement of product performance function. Therefore, technical specifications are subject to change without further notice. Please visit our website at www.labthinkinternational.com.cn for the latest updates. Labthink reserves rights of final interpretation and revision.