This document provides pricing and product details for various tools and equipment from Wood Country for December 2014. It includes summaries of 18 different products ranging from laser levels and mobile work centers to miter saws, random orbit sanders, drill bit sets, and more. Pricing is provided for each item along with product numbers, specs, and other key details.
The TorkWrench 10-100 iron roughneck provides up to 100,000 ft-lbs of torque for makeup and breakout jobs using a three-jaw gripping system and high-torque three-roller spinning system. It has an intelligent pneumatic control system and distributes load equally to reduce damage to tool joints. The unit is versatile and can be used on land or offshore as well as converted to a mobile bucking unit for offline assembly of tools.
The document describes a deepwater guidewire anchor supplied by IMENCO for subsea applications. The anchor is operated by an ROV, fits standard 8-5/8" guide posts, and can secure guidewires with tensions up to 45 tons. It has a simple, proven design that allows installation and release without special tools. The all-stainless steel anchor is supplied with full documentation and has been used on projects as deep as 2,200 meters.
The document describes two models of cable strippers, the WS 5 and WS 5A. Both tools are for stripping insulation from cables ranging from 600V to 35kV. The WS 5 can strip cable diameters from 0.260 to 1.265 inches and has preset stripping lengths up to 4 inches. The upgraded WS 5A has an adjustable strip stop for lengths from 0.625 to 2.5 inches. Both tools precisely strip various cable insulation types and are suitable for primary underground cable.
This document provides specifications for the RCO40LP wire rope cutter, including its cutting capacity of steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. The cutter is suitable for cutting wire ropes, cables, and umbilicals with a stainless steel body and corrosion resistant materials that provide long life. It also has an open design that allows for easy positioning on cables and can be used at any water depth.
The universal paddle level limit switch FTE 30 is used as a full, empty and demand alarm on silos containing solids. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
This document provides specifications for cable reeling drums used in steel plants. It outlines three types of cable reeling drums: 1) drums driven by rope drums through chain sprockets or gearboxes, 2) spring loaded reeling drums, and 3) drums driven by torque motors. It specifies design and construction requirements for components like slipring assemblies, drums, cassettes, and limit switches. Site conditions and material standards are also defined. The document aims to achieve standardization of cable reeling drums across steel plants.
The TorkWrench 10-100 iron roughneck provides up to 100,000 ft-lbs of torque for makeup and breakout jobs using a three-jaw gripping system and high-torque three-roller spinning system. It has an intelligent pneumatic control system and distributes load equally to reduce damage to tool joints. The unit is versatile and can be used on land or offshore as well as converted to a mobile bucking unit for offline assembly of tools.
The document describes a deepwater guidewire anchor supplied by IMENCO for subsea applications. The anchor is operated by an ROV, fits standard 8-5/8" guide posts, and can secure guidewires with tensions up to 45 tons. It has a simple, proven design that allows installation and release without special tools. The all-stainless steel anchor is supplied with full documentation and has been used on projects as deep as 2,200 meters.
The document describes two models of cable strippers, the WS 5 and WS 5A. Both tools are for stripping insulation from cables ranging from 600V to 35kV. The WS 5 can strip cable diameters from 0.260 to 1.265 inches and has preset stripping lengths up to 4 inches. The upgraded WS 5A has an adjustable strip stop for lengths from 0.625 to 2.5 inches. Both tools precisely strip various cable insulation types and are suitable for primary underground cable.
This document provides specifications for the RCO40LP wire rope cutter, including its cutting capacity of steel wire ropes up to 38mm in diameter with a maximum tensile strength of 1960N/mm2. The cutter is suitable for cutting wire ropes, cables, and umbilicals with a stainless steel body and corrosion resistant materials that provide long life. It also has an open design that allows for easy positioning on cables and can be used at any water depth.
The universal paddle level limit switch FTE 30 is used as a full, empty and demand alarm on silos containing solids. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
This document provides specifications for cable reeling drums used in steel plants. It outlines three types of cable reeling drums: 1) drums driven by rope drums through chain sprockets or gearboxes, 2) spring loaded reeling drums, and 3) drums driven by torque motors. It specifies design and construction requirements for components like slipring assemblies, drums, cassettes, and limit switches. Site conditions and material standards are also defined. The document aims to achieve standardization of cable reeling drums across steel plants.
The document describes two products for working with transmission cables: a transmission cable clamp and a curved taper high voltage pencilling tool. The clamp is designed to securely hold cables between 2-5 inches in diameter during stripping. The pencilling tool is used to prepare cable insulation for splicing and comes in different taper lengths and blade options depending on the specific cable. Both products are made in the USA.
The document provides information on Plarad's products and services for bolting technology. It summarizes Plarad's lineup of nutrunners, including electric nutrunners like the DE1 and DA2, pneumatic nutrunners like the DP1, and larger nutrunners that can provide torque up to 12,000 Nm. It also describes Plarad's hydraulic and manual bolting products and services.
This document provides information on the Kee Guard roof edge protection system. It describes the system's components, installation process, and compliance with relevant safety standards. The modular system uses galvanized steel posts and tubes along with recycled PVC counterweights to provide a freestanding collective fall protection along roof edges up to a 10 degree pitch. It can be installed quickly without penetrating the roof surface and sections can be added or changed on site using standard fittings and tools.
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
This document provides specifications for low tension TEFC induction motors ranging from frame sizes 63 to 355. It includes information on energy efficiency levels, design improvements, bearing sizes, terminal box details, and performance data with efficiency ratings at full, 3/4, and 1/2 load for various power outputs.
This document provides information on components for grounding systems, including ground rods, couplers, conductors, and accessories. It describes the physical characteristics and size requirements for different types of ground rods and conductors. It also provides part numbers, specifications, and packaging information for a variety of grounding system components like copper-bonded ground rods, compression and threaded couplers, driving sleeves, and theft deterrent composite cables.
This document summarizes Leviton's 30 Amp AC toggle switches. It describes the switches as industrial-grade for heavy-duty applications like boilers and heaters. The switches feature rugged thermoplastic housing, heavy-gauge mounting straps and contacts for durability and long life. They provide smooth toggle action for fast make/slow break operation. Dimensional drawings and specifications are also provided.
Single phase (2 lines of 3 phase) Welding Transformers
Class F Insulation - enhances services life
User friendly AC ARC Welders
Easily maneuverable from job to job on the shop-floor
Stepless, smooth and infinitely variable current regulation
Forced air cooled transformers - less coil temperature resulting in longer service life
Smooth welding current control by moving core magnetic shunt design
Stepless, smooth and infinitely variable current regulation
Adjustment of welding current possible even while welding is in progress
1 swivel front wheel and 2 rear wheel arrangement for easy maneuverability
ON-OFF switch control, current control and current indicator provided on the front panel
A Special design provides for excellent dynamic characteristic and ensures smooth and optimum
metal transfer - RED Series specifically recommended for low hydrogen electrodes
This document provides information on the Sirius Cleat 379 series cable cleat, including:
- It is suitable for cable diameters between 23-128mm and operating temperatures from -40°C to +120°C.
- It has an ergonomic design that allows for easy single-tool installation from the top side.
- It is manufactured from corrosion resistant 316L stainless steel and LSOH plastic liners.
- It can withstand harsh environments and high fault currents, making it suitable for applications with trefoil cable formations.
Ramen Ball Sector Basis Weight Valve is an Electrically operated control valve with a high-precision control actuator for GSM / basis weight control application in Pulp & Paper Industry.
The document provides an overview of MA series aluminum triphase squirrel cage induction motors. Key details include:
- Frame sizes range from 56-132. Output ranges from 0.06-18.5Kw at 50Hz. Motors are IP55 protection class with insulation grade F.
- Performance data is provided for 2 pole motors ranging from 0.09Kw to 11Kw in output. Data includes full load current, efficiency, power factor, and temperature rise.
- An exploded view diagram shows the main components including the frame, end shields, bearings, stator, and rotor.
- Intended applications include common machinery that has no special requirements, like reducers, pumps, and food
The Explosion Proof Limit Switch Box offers a wide range of signaling options in a compact corrosion resistant aluminum alloy housing available for close - mounting onto Kinetrol actuators or discrete mounting via a Kinetrol 05 square or industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with true industrial robustness.
Internally fitted options include AS interface digital communication and a 4-20mA, 2-wire, modulating angle retransmit circuit. The range of switches and terminal arrangements includes 2 or 4 switches and extra connections - allowing single point termination of wiring for limit switches and solenoid valves. This product is available to mount on Kinetrol models 03 - 30.
The document describes WT Henley's Series 7 House Service Cut-outs, which are underground fuse service equipment for Combined Neutral and Earth (CNE) systems rated up to 100A. The cut-outs feature glass reinforced polyester material for strength and durability. They have tamper-resistant unused cable entries and precision-designed fuse clips and terminal screws to ensure low contact resistance. The product range includes standard single pole and single pole with neutral/earth cut-outs, as well as close-coupled and protection chamber options.
The Kinetrol Universal Limit Switch offers a wide range of signaling options in a zinc alloy fully enclosed corrosion
resistant case available for direct mounting onto Kinetrol rotary actuators, or discrete mounting via an industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with real industrial-quality robustness. - Internally fitted options include AS interface digital communication and a 4-20 mA 2-wire modulating angle retransmit circuit.
OUR WINTER FLYER IS NOW HERE: "GET A GRIP ON WINTER" Our WINTER Flyer Safety Equipment is back. Check out all the specials we got on right now for Personal Protection for the Skilled Work Trades, Commercial heaters for contractors, commercial buildings or households. We also got Outdoor body warmth gloves and Protection, Supplies for removal of Snow and Ice, Storage for sand and rock salt, Booster Cables, Tarpaulins, Scraper mats and much much more!
Tension hooks for use in component testing, often used individually in conjunction with other gripping devices. Variations of the hook profile are available to suit the component under test as well as a self-aligning option.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
Measurement solutions for steel mill industryAMETEK STC
Measurement Solutions for the Steel Mill Industry is providing simple and informative overview of the process and the ideal measurement instrumentation. We cover linear position (LDT), Rotary position, brakes, level measurement, pressure measurement and the mill-duty cable and hose carriers Catrac as well. Read the brochure for inspiration to the optimal solutions in steel mill or similar heavy industry
The document discusses two handheld drilling motors, the CDM163 and CDM203. It summarizes their key features, which include durability, reliability, ergonomics, and a 2-year warranty. Their technical specifications are also provided, such as power output, RPM ranges, maximum drilling diameters, and weight. The document also introduces some associated drilling accessories like core bits and drilling stands.
The document describes two products for working with transmission cables: a transmission cable clamp and a curved taper high voltage pencilling tool. The clamp is designed to securely hold cables between 2-5 inches in diameter during stripping. The pencilling tool is used to prepare cable insulation for splicing and comes in different taper lengths and blade options depending on the specific cable. Both products are made in the USA.
The document provides information on Plarad's products and services for bolting technology. It summarizes Plarad's lineup of nutrunners, including electric nutrunners like the DE1 and DA2, pneumatic nutrunners like the DP1, and larger nutrunners that can provide torque up to 12,000 Nm. It also describes Plarad's hydraulic and manual bolting products and services.
This document provides information on the Kee Guard roof edge protection system. It describes the system's components, installation process, and compliance with relevant safety standards. The modular system uses galvanized steel posts and tubes along with recycled PVC counterweights to provide a freestanding collective fall protection along roof edges up to a 10 degree pitch. It can be installed quickly without penetrating the roof surface and sections can be added or changed on site using standard fittings and tools.
This document summarizes two pole-mounted fused cutout models for providing low voltage power supply to rural dwellings. The standard model is robust, designed for ease of use with a slide-fit front cover and accepts fuselinks up to 400A. The compact model can be pole, wall, or cross arm mounted, has mechanical terminals that don't require additional lugs, and accepts conductors between 70-300mm2. Both are designed to meet IP43 rating and BS7656:1993 compliance standards.
This document provides specifications for low tension TEFC induction motors ranging from frame sizes 63 to 355. It includes information on energy efficiency levels, design improvements, bearing sizes, terminal box details, and performance data with efficiency ratings at full, 3/4, and 1/2 load for various power outputs.
This document provides information on components for grounding systems, including ground rods, couplers, conductors, and accessories. It describes the physical characteristics and size requirements for different types of ground rods and conductors. It also provides part numbers, specifications, and packaging information for a variety of grounding system components like copper-bonded ground rods, compression and threaded couplers, driving sleeves, and theft deterrent composite cables.
This document summarizes Leviton's 30 Amp AC toggle switches. It describes the switches as industrial-grade for heavy-duty applications like boilers and heaters. The switches feature rugged thermoplastic housing, heavy-gauge mounting straps and contacts for durability and long life. They provide smooth toggle action for fast make/slow break operation. Dimensional drawings and specifications are also provided.
Single phase (2 lines of 3 phase) Welding Transformers
Class F Insulation - enhances services life
User friendly AC ARC Welders
Easily maneuverable from job to job on the shop-floor
Stepless, smooth and infinitely variable current regulation
Forced air cooled transformers - less coil temperature resulting in longer service life
Smooth welding current control by moving core magnetic shunt design
Stepless, smooth and infinitely variable current regulation
Adjustment of welding current possible even while welding is in progress
1 swivel front wheel and 2 rear wheel arrangement for easy maneuverability
ON-OFF switch control, current control and current indicator provided on the front panel
A Special design provides for excellent dynamic characteristic and ensures smooth and optimum
metal transfer - RED Series specifically recommended for low hydrogen electrodes
This document provides information on the Sirius Cleat 379 series cable cleat, including:
- It is suitable for cable diameters between 23-128mm and operating temperatures from -40°C to +120°C.
- It has an ergonomic design that allows for easy single-tool installation from the top side.
- It is manufactured from corrosion resistant 316L stainless steel and LSOH plastic liners.
- It can withstand harsh environments and high fault currents, making it suitable for applications with trefoil cable formations.
Ramen Ball Sector Basis Weight Valve is an Electrically operated control valve with a high-precision control actuator for GSM / basis weight control application in Pulp & Paper Industry.
The document provides an overview of MA series aluminum triphase squirrel cage induction motors. Key details include:
- Frame sizes range from 56-132. Output ranges from 0.06-18.5Kw at 50Hz. Motors are IP55 protection class with insulation grade F.
- Performance data is provided for 2 pole motors ranging from 0.09Kw to 11Kw in output. Data includes full load current, efficiency, power factor, and temperature rise.
- An exploded view diagram shows the main components including the frame, end shields, bearings, stator, and rotor.
- Intended applications include common machinery that has no special requirements, like reducers, pumps, and food
The Explosion Proof Limit Switch Box offers a wide range of signaling options in a compact corrosion resistant aluminum alloy housing available for close - mounting onto Kinetrol actuators or discrete mounting via a Kinetrol 05 square or industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with true industrial robustness.
Internally fitted options include AS interface digital communication and a 4-20mA, 2-wire, modulating angle retransmit circuit. The range of switches and terminal arrangements includes 2 or 4 switches and extra connections - allowing single point termination of wiring for limit switches and solenoid valves. This product is available to mount on Kinetrol models 03 - 30.
The document describes WT Henley's Series 7 House Service Cut-outs, which are underground fuse service equipment for Combined Neutral and Earth (CNE) systems rated up to 100A. The cut-outs feature glass reinforced polyester material for strength and durability. They have tamper-resistant unused cable entries and precision-designed fuse clips and terminal screws to ensure low contact resistance. The product range includes standard single pole and single pole with neutral/earth cut-outs, as well as close-coupled and protection chamber options.
The Kinetrol Universal Limit Switch offers a wide range of signaling options in a zinc alloy fully enclosed corrosion
resistant case available for direct mounting onto Kinetrol rotary actuators, or discrete mounting via an industry standard VDI/VDE interface onto any make of rotary actuator. Easy to wire and set up with real industrial-quality robustness. - Internally fitted options include AS interface digital communication and a 4-20 mA 2-wire modulating angle retransmit circuit.
OUR WINTER FLYER IS NOW HERE: "GET A GRIP ON WINTER" Our WINTER Flyer Safety Equipment is back. Check out all the specials we got on right now for Personal Protection for the Skilled Work Trades, Commercial heaters for contractors, commercial buildings or households. We also got Outdoor body warmth gloves and Protection, Supplies for removal of Snow and Ice, Storage for sand and rock salt, Booster Cables, Tarpaulins, Scraper mats and much much more!
Tension hooks for use in component testing, often used individually in conjunction with other gripping devices. Variations of the hook profile are available to suit the component under test as well as a self-aligning option.
Web: www.TiniusOlsen.com
Contact Us: info@TiniusOlsen.com
Measurement solutions for steel mill industryAMETEK STC
Measurement Solutions for the Steel Mill Industry is providing simple and informative overview of the process and the ideal measurement instrumentation. We cover linear position (LDT), Rotary position, brakes, level measurement, pressure measurement and the mill-duty cable and hose carriers Catrac as well. Read the brochure for inspiration to the optimal solutions in steel mill or similar heavy industry
The document discusses two handheld drilling motors, the CDM163 and CDM203. It summarizes their key features, which include durability, reliability, ergonomics, and a 2-year warranty. Their technical specifications are also provided, such as power output, RPM ranges, maximum drilling diameters, and weight. The document also introduces some associated drilling accessories like core bits and drilling stands.
I Norton Clippers CDM-sortiment ingår två modeller: CDM163 som har en motoreffekt på 1.800 W och är avsedd för våtborrning med borrkronor med en diameter på upp till 160 mm, och CDM203 med en motor på 2.000 W som kan användas för både torr- och våtborrning med borrkronor upp till 200 mm diameter. Den senare är särskilt lämplig för håltagning i armerad betong.
This document is a flyer from Trane that promotes various HVAC products and services. It provides information on compressor models and parts, mini split systems, thermostats, motors, and other equipment. It encourages signing up for the Trane rewards program to earn discounts. Various products are listed with prices, including compressors starting at $145, filter driers from $10-60, and mini split units from $337-364.
The document describes a mechanical overload switch for hoists and cranes produced by Vetec Asia Pacific and Vetec Aps. The switch has a minimal lifting height reduction of only 150mm in length. It provides quick and precise installation with simple tools and allows the user to visually see when the switch is correctly adjusted. The switch has a capacity of up to 5 tons and is available in stock from Vetec Aps in Denmark.
Brochure Measurement Solutions for the Steel Mill Industry #3AMETEK STC
The steel industry creates some of the most demanding working environments for instrumentation. This brochure creates an overview of the process and solutions on all sorts of position and level measurement from landing the ore the production steps and the steel finishing. We provide a simple overview with recommendations on instruments such as linear displacement transducer (LDT), Rotary Position Limit switches (RLS), Cable and hose management (Catrac), Industrial Brakes, Level measurement and pressure sensors.
Total chain solutions - diamond cutting chains & accessories for cutting pip...Yan Mashov
High Quality Chains
SUPERIOR PERFORMANCE LASER WELDED DIAMOND CHAIN FOR:
General building materials
Firebrick/ Refractories
Reinforced concrete
Stone /Granite
Block/ Sandstone/ Abrasive materials
Coal
Building Bricks
Ductile iron/ Cast iron/ PVC/ HDPE
SPEED – 25% faster than others.
LIFE SPAN – 25% longer life span than others.
IMPROVED USER EXPERIENCE – On each link there is a segment providing smoother cutting and higher output. Diamond segment on each link providing smoother cutting, higher output and less vibration.
BULK CONCEPT – Efficient stock management solution: cut to size and repair capability.
COMPLETE KIT – Provides a compatible answer for most common chain cutting machines.
ACCESSORIES – Compatible high quality guide bars, sprockets and chain parts.
TECHNICAL SUPPORT – Direct from the manufacturer.
This document provides product descriptions and specifications for various automotive tools. It includes tool sets for removing car radios and terminals, as well as individual tools like a battery terminal puller, voltage testers, and a circuit tester. Product details provided include available sizes, materials, voltage/weight ranges, and intended vehicle applications.
Airtherm is an HVAC specialist company with over 54 years of combined experience. They offer a range of flue and chimney systems including twin wall modular chimneys, single wall modular chimneys, and shared flue systems for multiple boilers. Their products are high quality, meet relevant standards, and come with a 10 year guarantee. They provide experienced installation teams across the UK.
The plumbing system is composed of two separate subsystems. One subsystem brings fresh water in, and another takes the wastewater out. In the plumbing system, the pipe used to transport potable drinking water usually use different materials from the pipe carrying drain water. The different regions also have differences in pipe material and size. Your plumbing system may contain one or several types of pipe.
Due to the complicated pipe and fitting standards, plumbing used to be limited to professionals. But the availability of a wide range of plumbing tools has allowed everyone to redo the pipe without any permit or training.
There are four methods through which you can get the work done:
1.Crimping
2.Pressing
3.Clamp
4.Expansion
5.Push to Connect
Focused heavily on providing people professional and affordable plumbing tools, IWISS spent a lot on R&D. For past decades, our company has worked across a variety of plumbing tools, which cover all five methods and meet the standards from the imperial system to the metric system. Our product line also includes pipe cutters, decrimping tools, and chamfer, offering more possibilities in pipe prefabrication. Not only in providing the single tool, but we also have professional a comprehensive, and high-performance, up-gradable tool kit for installing and maintaining today’s and tomorrow’s plumbing system.
Fire Pro is a manufacturer of premium fire fighting equipment built specifically for the industrial, municipal, wild-land, and marine markets. We carry and extensive array of monitors, nozzles, and hydrants for multiple applications and can also field requests for custom orders.
This document provides information on Interlope Africa, a mining solutions company located in Krugersdorp, South Africa. It lists the industries it serves, including power plants, mines, ports and more. The bulk of the document describes various types of conveyor belts and other products offered by Interlope, including their characteristics and applications. These include flat belts, wedge wrapped belts, steel cord belts, and more. The document also provides details on Interlope's electrical division and the various lighting and motor products available.
Presentation of CKD Corporation in pneumatic division.
You can find those products in Brazil by Italpneumatica Automação. www.italpneumatica.com (11) 4177-1010
This document provides a product catalogue for safety and janitorial supplies. It includes pricing and descriptions for items like cooling bandanas and hats, traffic cones, barricade tape, crowd control barriers, safety vests, ponchos and more. The products are offered at promotional prices until August 31, 2015 and are intended to help with tasks like traffic control, outdoor safety equipment, and cleaning/maintenance. Contact information is provided to purchase any of the items listed.
This document provides information on various types of pneumatic actuators and cylinders for industrial applications. It describes tie-rod cylinders, compact cylinders, guided cylinders, clamp cylinders, rotary clamp cylinders, pin clamp cylinders and other specialized cylinders. It also includes information on brake cylinders, locating jigs, rodless cylinders, anti-spatter cylinders, air supply units, fittings and tubing designed to be weld resistant. Details are given on flow and pressure sensors, solenoid valves, gas valves, water flow sensors, and direct drive actuators. A wide variety of pneumatic components for industrial automation processes are summarized.
This document provides information about mid-span strippers from Ripley for removing insulation from electric utility cables. It lists several models of mid-span strippers that can strip cable insulation to any length for cable outer diameters between 1.05 to 1.80 inches. The strippers are designed for gloved hand and hot stick operation and separate tools are required for each cable size. Replacement blades are also available for the different models.
This document summarizes the features of a Kurt rotary table workholding system. The system includes a high density vise tower that can hold multiple parts in eight clamping stations to increase productivity. It provides repeatable clamping down to 0.0002" and each station delivers up to 7,460 lbs of clamping force. A variety of jaw options are available to suit different applications. The system comes with components like a four-sided column, end support assembly, and indexer locator. Kits are compatible with several brands of CNC lathes and machining centers.
1. buying team Favs
Ron’sPick
James’Pick
Kelvin’sPick
Doug’sPick
WooD couNTRy DEcEMbER 2014
Prices in effect December 4 - 24,2014
• Manual level in horizontal and vertical planes with accuracy
of 1/8" at 30 feet
• Includes:manual-leveling rotary laser level with adjustable
base and mounting bracket,elevating tripod,instruction
manual,tinted glasses,hard-shell carrying case
#3016417
ManuaL rotary LasEr LEvEL Kit
9499
each
• Innovative design with robust structure and large volume
• Telescopic handle for convenient manoeuvrability and folds
down for storage
• Removable tray allows enough space for larger tools to be
stored underneath
• Flat top 2 in 1
#STST1862 & #0556803
MobiLE WorK CEntrE
3999
each
• Loud 85db alarm,works during power outages
• No installation required,single button test/mute
• Electrochemical sensor,the most accurate technology
available for detecting carbon monoxide
• Low battery warning with silence feature
#0938431
Carbon MonoxidE dEtECtor
2999
each
• Adjustable stainless steel mitre detent plate with 11-positive
stops delivers repeatable accuracy and worksite durability
• Tall sliding fence supports crown moulding up to 5-1/4" nested
and base moulding up to 6-1/2" vertically against the fence
while easily sliding out of the way for bevel cuts
• Adjustable mitre saw laser system delivers visibility to the
cutting path
• Lightweight with built-in carry handle for easy portability
#DW715 & #8005852
12”CoMpound MitrE saW
• Textured anti slip top and body grip,maintains controllable
pad speed and minimizes gouging during start up
• Dust sealed switch,sealed 100 percent ball bearing
construction,high capacity dust bag with built in vacuum
adapter,dual plane counter-balanced fan reduces user
fatigue,accepts 5",8 hole hook and loop paper
#D26451K & #6189294
randoM orbit sandEr WitH CasE
8499
each
35999each
• Hex shank locking system prevents bits from slipping
• rapid load holder fits all brands of corded/cordless 3/8"
or 1/2" drills
• Includes:rapid load holder,(1) one each:1/4" and 3/8"
socket adapters and more
#DW2518 & #2920952
30 piECE rapid Load sEt
2999each
Wood CountryEstevan 634-5111 McLean 699-7284 tisdale 873-4438
Estevan 634-5111 McLean 699-7284 Tisdale 873-4438
2. Great Gift ideas
2
WooD couNTRy DEcEMbER 2014
• 3 orbital Settings enable operator to obtain a more aggressive cut
• Variable Speed Dial enables operator to adjust cutting speed based on materials or application
• Heavy Duty Aluminum base increases durability and maximizes tool life
• Dust cover effectively contains chips during operation
• Vacuum Port enables direct connection of dust extractor
• Ergonomic Soft Rubber Grip design for vibration absorption and comfortable
operation
#4329K & #3174869
variabLE spEEd
d-styLE HandLE jig saW
8900each
Two speed 1/2”hammer/driver/drill (0-400/0-1,500 RPM) with
4 pole motor delivers 450 in.lbs.of max torque and weighs only
4.2 lbs.,variable speed impact driver (0-2,300 RPM) provides
1,330 in.lbs.of max torque in a compact design and weighs only
3.4 lbs.,reciprocating saw provides 0-2,900 SPM with tool less
blade changes and shoe adjustments and weighs only 7.9 lbs.,4
position flashlight with Xenon bulb 4 hours run time.Includes:
(2) 18V LXT Lithium-Ion battery,(1) 30 minute rapid optimum
charger,(1) contractor bag.
#3551462 & #LXT407
MaKita CordLEss
CoMbo 18v Lxt407 4pC
46500
each
• Rack and Pinion mechanism for fine depth adjustment
• Adjustable guide for trimming laminates
• Ergonomic Slim body Design for better operator control
and comfort
• Soft rubber grip design for vibration absorption and
operator comfort
#3709X
LaMinatE triMMEr Kit ¼”
WitH aLuMinuM Carry CasE
9900
each
• Ice Hardened™ cryogenically treated for up to 50% longer life
• optimized tooth form for up to 2X faster cutting
• Wide,angled & offset slots for easy plug access
• bi-metal construction with 8% cobalt for increased wear
resistance
#49-22-4005
8-pC gEnEraL
purposE iCE
HardEnEd™
HoLE saW Kit
5999
each
• 135° Split Point starts drilling on contact
• FitsTASK and similar 1/4" quick change adapters
• For drilling steel,non-ferrous metals (copper,
aluminum,brass)
• Titanium coated bits cut faster
#T92013
13 pC QuiCK
CHangE titaniuM
driLL bit sEt -
1/16" - 1/4"
1499
each
• 6pcTASK Hard Grip Screwdriver Set Includes:1/4"x6" Slot,
#1x4" PH,#2x4" PH,#1x4" Rob,#2x5" Rob,#3x5" Rob
• Acetate Hard Grip Screwdriver Set
#T50490
6pC tasK Hard grip
sCrEWdrivEr sEt
1299
each
• 360° RoTATING ouTLETS adjust to make room for large plugs
• 4 Ac outlets,2 uSb outlets
• 918 JouLES ADVANcED SuRGE PRoTEcTIoN
#T43401P
rEvoLvE+™
6-outLEt rotating
surgE protECtor
W/usb
1999
each
• TASK® 16 oz.Multi-Function Framing Hammer
• unique 1-piece steele design swings like a 21oz fraiming
hammer
• Magnetic nail starter
• Milled face
#T22450
tasK® 16 oz. MuLti-FunCtion
FraMing HaMMEr
2449
each
Variable speed for increased cutting efficiency,long 1-1/8”stroke
for faster cutting,all ball and needle bearings for longer tool life,
internal dust blower system clears debris from the line of cut for
better visibility and accuracy.Heavy duty shoe features tool-less
adjustments.Specs:1-1/8”stroke length,strokes/min 0-2,800
SPM,17-3/4”long,weighs 7.3lbs.Includes:(2) blades,(1) plastic
tool case
#8647240
#JR3050T
10500
each
Driver-drill features 1/2”chuck,variable 2-speed,0-400 & 0-
1,500 RPM with 4-pole motor delivers 480 in.lb.of max torque
and weighs 3.3 lbs.Impact driver features variable speed,0-
2,300 RPM & 0-3,200 IPM,provides 1,2800 in.lbs.of max
torque and weighs 2.9 lbs.15-minute rapid optimum charger
communicates with the batter’s built-in chip throughout the
charging process to optimize battery life.charger has a built-in
fan to cool the battery and meets Energy Star guidelines.
Includes two 18V compact lithium-ion mattery,15-minute
rapid optimum charger and contractor bag.
#1163021
#LcT200W
MaKita 18v LitH-ion Kit
LCt200W 2pC CoMbo
26500
each
MaKita
11 aMp rECiproCating saW
3. Cool December Deals
3
WooD couNTRy DEcEMbER 2014
• Delivers fast cutting through a wide range of material
such as drywall,wood,and PVc
• Variable speed trigger allows for a controlled cut
• Quik-Lok 1/2" universal tang blade clamp offers fast and
easy blade changes
#5913827
CordLEss rECiproCating saWs
HaCKzaLL Kit 12v
• Single handle
• Washerless
• With side spray
• chrome
#0138834 8999
each
KitCHEn FauCEt singLE spray
• Water resistant and flame
retardant
• ultra flexible in
temperatures down to -
40 degrees F and stands
up to +140 degrees F
• Strain relief prevents wire
from separating from the
plug
• 35 ft.long
#9771049
1599
each
tripLE-tap
ExtEnsion Cord
• Highly flexible soft touch nylon frame
• Soft Megal temple tips for improved comfort
• Fog and scratch resistant
• Lenses blocks 99.9 percent of uVA/uVb/uVc Rays
• ANSI Z87.1 2003 compliant
#9996547
1499
each
sungLassEs - saFEty gLassEs
•100 pieces
#9924929
starting from
starting from starting from starting from
spEEdWay 100pC
sCrEWdrivEr Kit
• Durable aluminum handle with belt clip
• Super sharp SK5 blade
• Quick-change blade mechanism
• comfortable over-sized thumb pad
#1800762 999
each
FoLding utiLity KniFE
Die cast aluminum housing for durability.Rewinds faster and
has a 5 to 1 gear ratio,quick geaer release and stainless steel
hook and crank handle.crank will not spin when pulling out
line.Includes aluminum line level and 4 oz.bottle of Stanley
chalk.
#3730843 & #47-6816
1499
each
FatMax xtrEME
CHaLK LinE &
rEEL sEts
• Ergonomic and heavy duty insulated color coded clamps
• Fits both top and side post batteries
• 12’-Tangle-free
#5578158
1999
each
boostEr CabLEs
Reverse ground pin
placement,when mounted
to wall,unit accepts most
right angle and transformer
plugs.24 hr repeat cycle
programming,turns outlets
on and off same time daily.
Programmable in 30 minute time intervals,provides 48 setting
options in 24 hr period.Push down pins,extremely easy to
operate.Angled housing design makes unit easy to read and
program.Two 3 prong grounded outlets,use with indoor or
outdoor devices requiring a grounded connection,control 2
devices from one outlet.on/off top mount override switch to
easily bypass programming.compatible with
cFL,LED,fluorescent and incandescent bulbs.
15A resistive,10A tungsten,1/2 horsepower.
#9058801y
699
each
2out 3-C Hd
24 Hr indoor
tiMErs
• For skiers,hunters,fishermen,golfers,campers,or anyone
who works or plays in the cold.
• Portable heat source that operates at an average
temperature of 135 degrees Fahrenheit that last for seven
hours or more
• Pack of 10
#3398518 999
each
10 paCK Hand WarMErs
4899
each14999
each
• Automatic secure locking mechanism holds bike in place
• Heavy duty pulley system easily hoists bike up to 50lbs
• Adjustable hooks work with both small & large bikes
• Steel construction for tough
• Reliable support
#8218232 1699
each
biKE storagE
puLLEy systEM
WatEr pipE
FrEEzE
protECtion
CabLEs
• 12-ft.length
• Temperature -
controlled cable runs
straight along pipe
and valves,held in
place by application
tape and plugs into grounded
electrical outlet
• Keeps water flowing to -40
• Pipe requires 1/2" non-flammable insulation such as
fiberglass.For plastic pipe,its recommended wrapping pipe
with aluminum foil before cable installation
#6836589 3299
each
starting from
starting from starting from starting from starting from
4. All items may not be exactly as illustrated and/or available at all locations due to physical size,merchandising policies and manufacturers’shortage.
Dealer reserves the right to substitute comparable merchandise and limit quantities.Most items can be ordered by your dealer and a“Rain check”can be
issued assuring you of the price featured. Prices may vary slightly in different regions.“Not responsible for printing errors which may occur.”
WooD couNTRy DEcEMbER 2014
ultra green iCE MELtEr
•20kg bag
Superlux #3890
• Great high hiding power and adhesion
• Self-primer product
• May be applied to NEW Drywall
• Non-yellowing
#1596471311
2 typEs oF
CEiLing paint
prEMiuM &
supErLux
1000
oFF/gallon
ALL
• Insulating micro fleece liner
• 100% waterproof,windproof and breathable membrane
• Keeps hands warm and dry - 40gThinsulate
• Durable outer shell with extensive reinforcement.
• Internal knuckle protection and terry cloth thumb
• uSES:WinterWork,Snow Shoveling,Winter Recreation
and Hunting
#1106269
WatErprooF
WintEr WorK
gLovEs
3999
each
• Telescopic snow roof rake
• Poly blade
• Aluminum oval handle with non-slip grip
• Integrated push buttons on the handle
• Approx.total length:16.5'
#9569005 & #0534891
tELEsCoping
16’rooF raKE
4499
each
• Poly backsave
#8924003
sHovELs poLy snoW
sHovEL baCKsavE
1999
each
• Portable comfort
furnace with
remote
• utilizes quartz
and resistance
heater
technology
• Includes high-volume cage type
blower,built-in casters,programmable timer,cool
down cycle,digital room temperature and function
display,multi-function hand held remote
#3749827 chestnut or #3749843 oak
ELECtriC
HEatEr
19999
each
Call for Competitive pricing
WOOD COUNTRY Open Monday Through Saturday
Closed Sundays
Estevan 634-5111 McLean 699-7284 Tisdale 873-4438