Iskra Energy Management Expertise: smart grid solutionsMinka Grdesic
This solution provides all necessary means for equipping your distribution grid to have all relevant data always centrally available for monitoring as well as for basic data analysis. All instrument settings together with their measurements, alarms or PQ data can now always be available at the tip of your fingers.
This solution provides all necessary means for equipping your distribution grid to have all relevant data always centrally available for monitoring & analysis. The solution can assure some crucial advantages in your grid such as: • system protection improvements • more reliable operation • faster responses to failures • better maintenance • control over power consumption & losses within the network • historic data for better planning • power quality improvement • better control over the installed equipment
A Building Management System is a computer-based control system that is installed in the buildings in order to control and monitor the mechanical and electrical equipment of the building including lighting, fire systems, ventilation, security systems etc.
A Building Management System is a Computer based system which can monitor and control different mechanical and electrical equipment in a building. A reliable, efficient and integrated controlling among these equipment’s in a building is the main objective of a Building Management System. This paper presents a Multi Agent Controlled Building Management System which is controlled as an agent based integrated system of different subsystems such as Lighting, Security, Air-conditioning, Ventilation
(PDF) Multi-agent controlled building management system. Available from: https://www.researchgate.net/publication/322347223_Multi-agent_controlled_building_management_system [accessed Jun 02 2021].
For more information follow :
https://www.researchgate.net/publication/322347223_Multi-agent_controlled_building_management_system
Temperature Monitoring System with 4 Sensorsvackerdxb
The TV2 stores over 80,000 temperatures for each sensors, which means that it will store over 1.5 year of temperature history if you are sampling temperature once every 10 minutes. If you are logging temperature and humidity it will store nine months of history for each of the four sensors. Although the TV2 can store and display temperature from absolute zero to thousands of degrees, the actual temperatures collected depends on the type of sensors being used.
Iskra Energy Management Expertise: smart grid solutionsMinka Grdesic
This solution provides all necessary means for equipping your distribution grid to have all relevant data always centrally available for monitoring as well as for basic data analysis. All instrument settings together with their measurements, alarms or PQ data can now always be available at the tip of your fingers.
This solution provides all necessary means for equipping your distribution grid to have all relevant data always centrally available for monitoring & analysis. The solution can assure some crucial advantages in your grid such as: • system protection improvements • more reliable operation • faster responses to failures • better maintenance • control over power consumption & losses within the network • historic data for better planning • power quality improvement • better control over the installed equipment
A Building Management System is a computer-based control system that is installed in the buildings in order to control and monitor the mechanical and electrical equipment of the building including lighting, fire systems, ventilation, security systems etc.
A Building Management System is a Computer based system which can monitor and control different mechanical and electrical equipment in a building. A reliable, efficient and integrated controlling among these equipment’s in a building is the main objective of a Building Management System. This paper presents a Multi Agent Controlled Building Management System which is controlled as an agent based integrated system of different subsystems such as Lighting, Security, Air-conditioning, Ventilation
(PDF) Multi-agent controlled building management system. Available from: https://www.researchgate.net/publication/322347223_Multi-agent_controlled_building_management_system [accessed Jun 02 2021].
For more information follow :
https://www.researchgate.net/publication/322347223_Multi-agent_controlled_building_management_system
Temperature Monitoring System with 4 Sensorsvackerdxb
The TV2 stores over 80,000 temperatures for each sensors, which means that it will store over 1.5 year of temperature history if you are sampling temperature once every 10 minutes. If you are logging temperature and humidity it will store nine months of history for each of the four sensors. Although the TV2 can store and display temperature from absolute zero to thousands of degrees, the actual temperatures collected depends on the type of sensors being used.
This solution provides all necessary means for equipping your business to have all relevant energy data always centrally available for monitoring & analysis. Energy related data can now always be available at the tip of your hands. The solution can assure some crucial advantages in your company such as:
• constant electric energy monitoring at different sites within the company: • constant gas/water consumption monitoring at different sites within the company • control over power consumption and losses within the company • more reliable operation as well as equipment maintenance • better equipment investment planning based on historic consumption and PQ data • electrical power quality data monitoring • better control over all installed equipment
Temperature and Relative Humidity Monitoring SystemNick Niculita
NS-T&RH Monitoring is a wireless, flexible and scalable temperature and relative humidity monitoring solution.
Using NS-T&RH you can monitor room temperature, dry cabinets, fridges, freezers, burn-in chambers, storage rooms, cold rooms, glass displays and much more
A brief history of metering and BACnet. By Christopher Searles from Eaton Corporation, Power Management Account Manager, NE Region. Christopher has been working 21 Years at Eaton.
This solution provides all necessary means for equipping your business to have all relevant energy data always centrally available for monitoring & analysis. Energy related data can now always be available at the tip of your hands. The solution can assure some crucial advantages in your company such as:
• constant electric energy monitoring at different sites within the company: • constant gas/water consumption monitoring at different sites within the company • control over power consumption and losses within the company • more reliable operation as well as equipment maintenance • better equipment investment planning based on historic consumption and PQ data • electrical power quality data monitoring • better control over all installed equipment
Temperature and Relative Humidity Monitoring SystemNick Niculita
NS-T&RH Monitoring is a wireless, flexible and scalable temperature and relative humidity monitoring solution.
Using NS-T&RH you can monitor room temperature, dry cabinets, fridges, freezers, burn-in chambers, storage rooms, cold rooms, glass displays and much more
A brief history of metering and BACnet. By Christopher Searles from Eaton Corporation, Power Management Account Manager, NE Region. Christopher has been working 21 Years at Eaton.
Education set for collecting and visualizing data using sensor system based ...IJMER
This article presents the issues of the wireless sensor measuring systems design which might
be used in education process of computer science faculty. The work shows the integration of a simple
measuring system, data management system, visual system and the hardware. Education set is designed
to consolidate knowledge in many fields of computer science and the interdependence between them, as
programming techniques, database, Web server, communications protocols, software and hardware.
Presented measuring sensor system consists of a number of measurement nodes, whose role is to
provide information about certain desirable characteristics, warning against natural hazards or
violation of the physical safety. An important part of the sensor system is a measuring subsystem and
the collecting measurement data subsystem. The article presents the temperature measurement sensor
system concepts and measurement data storage and visualization methods
A novel Ethernet based processing system for remote source harmonic detectionTELKOMNIKA JOURNAL
This work is carried out to objectively establish a new method to detect harmonics and measure the total harmonic distortion (THD) in a remote source, such as a high voltage transformer. The proposed approach utilized embedded design techniques to construct an embedded processor system with Ethernet intellectual property core to acquire data from a remote harmonics source. The designed system has several notable merits, namely, it is portable that can be applied in the work field, and it avoids workers from being subject to a hazard high voltage shock as well as its simplicity and high accuracy. The harmonics detection and analysis are achieved by inserting a microcontroller system near the high voltage transformer to acquire the necessary data and transmit it to a remote embedded processor system that is used to detect and analyze the harmonics. The microcontroller and the processor systems are connected by a wide-area network (WAN) through Ethernet and transmission control protocol/internet protocol (TCP/IP) protocols. The processor system is accommodated to perform 128 points fast Fourier transform for harmonics detection. Matlab simulations are used to validate the results. It is found that the results match very accurately the simulation results with an error of less than 0.02%.
Wireless energy meter monitoring with automated tariff calculationUdayalakshmi JK
Electricity billing has become a difficult task. The board has to make regular visit to the consumers house to make the reading. Also it can cause manual error. Now here we are monitoring the energy meter with modern techniques. The total energy consumed by the consumer and the consumption cost is known to the consumer and to the board by means of a hand held device.
Education set for collecting and visualizing data using sensor system based o...IJMER
This article presents the issues of the wireless sensor measuring systems design which might
be used in education process of computer science faculty. The work shows the integration of a simple
measuring system, data management system, visual system and the hardware. Education set is designed
to consolidate knowledge in many fields of computer science and the interdependence between them, as
programming techniques, database, Web server, communications protocols, software and hardware.
Presented measuring sensor system consists of a number of measurement nodes, whose role is to
provide information about certain desirable characteristics, warning against natural hazards or
violation of the physical safety. An important part of the sensor system is a measuring subsystem and
the collecting measurement data subsystem. The article presents the temperature measurement sensor
system concepts and measurement data storage and visualization methods
Embedded processor system for controllable period-width multichannel pulse wi...TELKOMNIKA JOURNAL
This paper proposes a sophisticated embedded processor system configured on zynq-xc7z020 field programmable gate array (FPGA) device for generating four channels pulse width modulation signals with variable duty cycles and periods using embedded design techniques. The main advantages of the technique are the high ability to perform a simultaneous control on period and pulse width of the generated signals and a high system design adaptation to choose the number of input/output channels. Controlling the the period and the pulse width is achieved by injecting a digital signal to the designed system to manipulate embedded timers’ operation. Vivado design suite is used to develop the system hard ware in the integrated development environment where the processing unit and peripherals are instantiated and interconnected. A practical aplication program in C language is prepared to make the system act according to the target. The designed system can be used to drive multi-phase D.C to D.C convertors. The system performance is verified by using vivado logic analyzer and chipscope windows. The superiority of the proposed approach over other approaches is that it resulted in a multi-inputs/multi-outputs pulse width modulation system with high controllability on the pulse width and the period that ranges from 15 nsec to 60 sec.
Real-Time Monitoring and Control System for Industryijsrd.com
Industrial automation and control systems become an integral part of industries and hence the project Real-Time Monitoring and Control System is an important system. Real-Time Monitoring and Controlling System aims to monitor the environmental parameters like Temperature, Humidity, Pressure statistics in any factory and controlling peripheral systems also transmit parameter wireless to the Monitoring room using Zigbee Technology. It uses ARM 7 based embedded technologies from NXP which is sister company of Philips and made for used in highly sensitive and critical Real Time systems.
Hi,
My name is Rohan Narula. I am a Fresh Graduate from The University of Texas at Arlington (MS Electrical Engineering) seeking full-time opportunities from June 2017. My specializations are in Embedded Systems / Firmware Development, Automation & Controls.
The ARM Based Granary Environmental Monitoring and Controlling System using Z...paperpublications3
Abstract: Grain storage is the important factor for seasonal production. Grain is an important strategic resource of the country. This article designs Granary Environment Monitoring and Controlling system which is having combination of Embedded system and ZigBee Wireless Sensor Network technology. The design of wireless sensor network using ZigBee which is used for multipoint acquisition and transmission of environment parameters using AVR Processor to the Grain storage manager and transmission of control signals through ARM7 which improves the Scalability and flexibility of grain storage management.
International Journal of Engineering and Science Invention (IJESI)inventionjournals
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online
Design and Implementing Novel Independent Real-Time Software Programmable DAQ...Editor IJCATR
The crucial features of many demanding applications like industry and aerospace are data acquisition and telemetry. It is
vital to observe and analyse the real time performance, in launch vehicle systems,so that designs can be certified and tuneablefactors
could be regulated to intensification the act and competence. At present used DAQ structures are of augmented size, weight and turn out
to be exorbitant and power hungry. This article introduce a new mission-independent real time software programmable DAQ system
using multipurpose MCU and sigma delta ADCs are planned,taking into account size, weight, costand act without compromiseon
precision, firmness and drift act. Additional digital filtering steps are also added to progress the system act. This system isproficientfor
directconnectionswithdiverse pressure and temperature sensors whichinterfaces 32 low frequency channel and two high frequency
channels. The system planned operates in two modes; one is data acquisition mode and another is program mode. Operativepower
lesseningmethods and wireless interface protocol between diverse data acquisition modules is also affected upon as avenues for future
work.
Smart Monitoring System for Substation’ Parameters and Automatic under Freque...
Portable Wireless Temperature Data Logger Dimitrios Tsiolchas
1. "AN AUTONOMOUS LOW POWER TELEMETRY SYSTEM FOR TEMPERATURE MONITORING AND DATA LOGGING" The objective of this final year project is the study and application of short range telemetry in the design and hardware implementation of an autonomous digital system for temperature sensing and data logging. The system features wireless interconnectivity between the portable sensing – data logging and monitoring components. The autonomous temperature data acquisition module, a fundamental component of the overall monitoring system, incorporates mixed-signal and ultra-low power microcontroller technology. Moreover, the overall system features integrated wireless telecommunications for logged data transmission and remote system configuration, using a programmable, low power, short range RF transceiver. The work for this project included the design and manufacture of the autonomous data logger printed circuit board using the EAGLE Layout Editor tool as well as the development and implementation of all necessary microcontroller algorithms using the Assembly programming language and the IAR Embedded Workbench V4.11B integrated development environment. In order to demonstrate system functionality, a simple supervisory and data acquisition software for the Microsoft Windows operating system platform was implemented, using the Visual C ++ 2008 programming language and the Microsoft Visual Studio 2008 integrated development environment. Individual fundamental objectives for this project were: 1) The design and implementation of electronic temperature measurement circuits applying mainstream methodologies while maximizing measurement accuracy. 2) The development of accompanying software algorithms, aiming to strike a balance between low power consumption and peak performance signal-data processing. 3) The study and application of appropriate wireless communication management methodologies, in order to develop and implement a data communication and transmission protocol tailored to the needs of the aforementioned prototype system. In the final stage of the project the autonomous temperature data logger prototype system was manufactured and tested. Its performance entirely satisfied all initial design and functional specifications, while some straightforward experimentation indicated that the desired accuracy to power consumption balance had been achieved. The implemented short range wireless communication channel, in particular more than satisfied the requirements of the targeted temperature data acquisition requirements.
